This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Experimental analysis of engine cooling capacity at different altitudes: a case study for biarticulated gas engine bus at high altitude
ISSN: 0148-7191, e-ISSN: 2688-3627
Published January 13, 2020 by SAE International in United States
This content contains downloadable datasetsAnnotation ability available
The demand for mass public transportation is growing on the major urban areas worldwide along with stricter demands on exhaust gas emission levels driven by society’s concern on the environment, leading to the development of sustainable transport solutions. Some of the solutions to reduce emission levels, such as electrified powertrains, may not be affordable for emergent markets due to the necessity of investments on infrastructure as well as high costs of some technologies. Bogotá city in Colombia is renewing its bus rapid transit (BRT) fleet and aims to reduce emission levels in its operation. Therefore, the development of a biarticulated bus driven by a compressed natural gas (CNG) Otto engine can be a sustainable solution for such application reducing both emission levels and fuel costs (compared to a Diesel model). However, the development of a cooling system for such bus becomes a challenge due to several factors that have a negative impact on cooling performance such as: high gross train weight (GTW); high altitude application; CNG Otto engine (compared to a Diesel model) and limited space for radiators/coolers on a front engine layout. Since tests during development phase could not be carried out at high altitude, engine cooling simulations were carried out for different vehicle configurations with varying ambient pressure to obtain a correction curve for engine cooling capacity at different barometric pressures. Then, development tests were carried out at low altitude on a prototype bus and later verification measurements were carried out at high altitude on a demonstration bus. Results from the measurements presented good correlation with the correction curve obtained by simulations and therefore can be applied in future developments.
Citationde Oliveira, G. and Garcia, B., "Experimental analysis of engine cooling capacity at different altitudes: a case study for biarticulated gas engine bus at high altitude," SAE Technical Paper 2019-36-0272, 2020.
Data Sets - Support Documents
|[Unnamed Dataset 1]|
|[Unnamed Dataset 2]|
|[Unnamed Dataset 3]|
|[Unnamed Dataset 4]|
|[Unnamed Dataset 5]|
- Hall, O. “Metod för S-order: Dimensionering av radiator / motorkylfläkt s.f.a. fordon och användarfaktorer”, Scania Technical Report 7013295, 2012.
- SAE International Surface Vehicle Recommended Practice, “Heavy Duty Vehicle Cooling Test Code”, SAE Standard J1393, Rev. Dec. 2017.
- Barbosa, F., “Natural Gas and Biogas Use in Transit Bus Fleets - A Technical, Operational and Environmental Approach”, SAE Technical Paper 2014-36-0194, 2014, https://doi.org/10.4271/2014-36-0194.
- Transmilenio, “Proceso de selección de licitación Pública N° 01 de 2018”, https://www.transmilenio.gov.co/publicaciones/150012/publicacioneslicitacion_publica_n_01_de_2018/, accessed May 2019.
- KULI, Software Tool for Vehicle Thermal Management Optimization, MAGNA Powertrain – Engineering Center Steyr GmbH & Co KG, Austria; (http://www.KULI.at).
- Hall, O. “Korrektionsfaktorer p.g.a. atmosfärstryck och glykolhalt för kylkapacitetsprov”, Scania Technical Report 7003755, 2010.