This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Characterization of Titanium Alloy (Ti6Al4V) Obtained by Additive Manufacturing
Technical Paper
2019-36-0112
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The development of additive manufacturing processes (3D printing), applied to metal alloys, is in line with the industry's current need for optimization, cost and development time reduction, allowing the construction of representative prototypes with equivalent materials / mechanical characteristics and customized end products, such as prostheses and brake system calipers, for which Ti6Al4V alloy has wide application due to biocompatibility and resistance. In addition, the need for more resilient materials is becoming ever greater at same time that failures need to be avoided. The occurrence of failures in structural components generates consumer dissatisfaction, which can result in serious accidents and the use of numerical tools during the project contributes to its prediction. For this, it is necessary to know the structural characteristics of the material resulting from the printing processes to guarantee robust designs. Currently there are few available information regarding mechanical and micro-structural proprieties on titanium alloy Ti6Al4V obtained by 3D printing process compared with other process. Thus, through physical tests of specimens according to ASTM A370-08a and microstructural evaluations, became possible the alloy characterization obtained by additive manufacturing and obtained proprieties correlation with conventional manufacturing process and with involved printing parameters. The adequate survey of the mechanical characteristics of components obtained through additive manufacturing is essential to ensure success in the application of this new technology.
Authors
Topic
Citation
Sartor, T., Da Silva, J., Da Fonseca Brasil, R., and Santiago, R., "Characterization of Titanium Alloy (Ti6Al4V) Obtained by Additive Manufacturing," SAE Technical Paper 2019-36-0112, 2020, https://doi.org/10.4271/2019-36-0112.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 |
Also In
References
- Navaro , M. et al. Biomateriais em ortopedia Journal of The Royal Society Interface 5 1137 1158 2008
- Kirchner , A. et al. Process Window for Electron Beam Melting of Ti-6Al-4V Powder Metallurgy Journal 58 246 249 2015
- Volpato , N. ; Silva , J. V. L. Aplicação direta da manufatura aditiva na fabricação final. In: Manufatura Aditiva: tecnologias e aplicações da impressão 3D São Paulo: Blucher 2017 1 324 344
- Centro de Tecnologia da Informação (CTI) Renato Archer 2015 https://www.cti.gov.br/pt-br/dtita/téccnicas-de-prototipagem-rapida-para-próteses-0 17 Mar. 2019
- Longhitano , G. A. et al. Surface Finishes for Ti-6Al-4V Alloy Produced by Direct Metal Laser Sintering Materials Research Journal 18 838 842 2015
- Rafi , H. K. et al. Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting Journal of Materials Engineering and Performance 22 3872 3883 Dec. 2013
- Galati , M. Iuliano , L. A literature review of powder-based electron beam melting focusing on numerical simulations Additive Manufacturing Journal 19 1 20 2018
- Fox , J. C. ; Moylan , S. P. ; Lane , B. M. Effect of process parameters on the surface roughness of overhanging structures in laser powder bed fusion additive manufacturing 3rd CIRP Conference on Surface Integrity 2016 USA. Anais do 3° CIRP CSI. USA 2016 131 134
- Hong , M. ; Min , B. K. ; Kwon , T. The Influence of Process Parameters on the Surface Roughness of a 3D-Printed Co-Cr Dental Alloy Produced via Selective Laser Melting Applied Sciences Journal 6 2016
- Tanrikulu , A. A. 2017
- Galarraga , H. et al. Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM) Materials Science and Engineering Journal 685 417 428 2017
- Sieniawski , J. et al. Microstructure and mechanical properties of high strength two-phase titanium alloys Titanium alloys - Advances in Properties Control United Kingdom: InTech 2013 69 80
- American Society for Testing and Materials 2008
- Mocko , W. ; Kostrzewski , C. ; Brodecki , A. Influence of Triaxiality on the Fracture Behavior of Ti6Al4V Titanium Alloy at Impact Loading Conditions Conference on Mechanics and Materials in Design 2017 Albufeira
- Wierzbicki , T. et al. Calibration and Evaluation of Seven Fracture Models International Journal of Mechanical Sciences 47 719 743 2005
- Aguiar , C. L. ; Couto , A. A. 2011
- Santiago , R. C. 2014
- Shunyu , L. ; Shin , Y. C. Additive Manufacturing of Ti6Al4V Alloy: A Review Materials and Design Journal 164 Feb. 2019
- Anderson , T. L. Fracture Mechanics - Fundamentals and Applications New York CRC Press 2005 630 978-1-4200-5821-5
- Arcam EBM System http://www.arcam.com/technology/products/arcam-q10/ 17 Mar. 2019
- American Society for Testing and Materials . 2017 9