This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Experimental Investigation on Turning Characteristics of TiC/MoS 2 Nanoparticles Reinforced Al7075 Using TiN Coated Cutting Tool
Technical Paper
2019-28-0165
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
In recent years, aluminum metal matrix composites (Al-MMC) are found as a potential material for numerous applications owing to its excellent tribological and mechanical properties. In this work, the machining characteristics of aluminum alloy (Al7075) reinforced with TiC/MoS2 having nanoparticle has been studied. The samples of aluminum metal matrix composites by varying TiC in 0, 2 and 4 and MoS2 in 0 and 2 of the percentage weight of aluminum alloy (Composite 1(Al7075), Composite 2 (Al7075/2TiC/2MoS2) and composite 3 (Al7075/4TiC/2MoS2), respectively) are fabricated by the stir-casing method. The turning characteristics of the developed metal matrix composites are studied at various parameters such as cutting velocity (30 m/min, 60 m/min and 90 m/min), cutting depth (0.5 mm, 1.0 mm and 1.5 mm) and composites (1, 2 and 3) using TiN coated cutting tool by dry turning at 0.05 mm/rev feed rate. The turning characteristics of the prepared samples are compared each other under L20 orthogonal array on CNC turning machine. The significant findings in the present study are: hardness of base aluminum alloy is found to increase with the addition of TiC/MoS2 in Al7075; surface roughness and flank wear are found to grow with the addition of nanoparticles of TiC/MoS2 in Al7075, evidence of built-up edge is observed for addition of nanoparticles in Al7075; cracks are originated from the edges of the chip and are propagated to the inner side along shear planes on examining the chip shape..
Recommended Content
Aerospace Material Specification | Laser-Powder Bed Fusion (L-PBF) Produced Parts, Nickel Alloy, Corrosion- and Heat-Resistant, 62Ni - 21.5Cr - 9.0Mo - 3.65Nb Stress Relieved, Hot Isostatic Pressed and Solution Annealed |
Aerospace Material Specification | Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651) Solution and Precipitation Heat Treated |
Aerospace Material Specification | Laser Powder Bed Fusion Process |
Authors
- Vetri Velmurugan Kannan - Sri Sairam Engineering College
- Venkatesan Kannan - Vellore Institute of Technology
- Devendiran Sundararajan - Vellore Institute of Technology
- Budireddy Uday Kumar - Vellore Institute of Technology
- Dhulipalla Anvesh - Vellore Institute of Technology
- Varupula Akhil - Vellore Institute of Technology
Citation
Kannan, V., Kannan, V., Sundararajan, D., Uday Kumar, B. et al., "Experimental Investigation on Turning Characteristics of TiC/MoS2 Nanoparticles Reinforced Al7075 Using TiN Coated Cutting Tool," SAE Technical Paper 2019-28-0165, 2019, https://doi.org/10.4271/2019-28-0165.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
Unnamed Dataset 7 |
Also In
References
- Jiang , X.S. , Wang , N.J. , and Zhu , D.G. Friction and Wear Properties of In-Situ Synthesized Al2O3 Reinforced Aluminum Composites Transactions of Nonferrous Metals Society of China 24 7 2352 2358 2014 10.1016/S1003-6326(14)63356-2
- Torralba , J.D. , Da Costa , C.E. , and Velasco , F. P/M Aluminum Matrix Composites: An Overview Journal of Materials Processing Technology 133 1-2 203 206 2003 10.1016/S0924-0136(02)00234-0
- Aydın , H. , Bayram , A. , Uğuz , A. , and Akay , K.S. Tensile Properties of Friction Stir Welded Joints of 2024 Aluminum Alloys in Different Heat-Treated-State Materials and Design 30 6 2211 2221 2009 10.1016/j.matdes.2008.08.034
- Kang , Y.C. and Chan , S.L.I. Tensile Properties of Nanometric Al2O3 Particulate-Reinforced Aluminum Matrix Composites Materials Chemistry and Physics 85 2-3 438 443 2004 10.1016/j.matchemphys.2004.02.002
- Choudhary , A. and Chauhan , S.R. Application of Response Surface Methodology to Evaluate the Effect of Cutting Tool Inserts on Machining of Aluminium 7075 Alloy on CNC Turning Centre International Journal of Machining and Machinability of Materials 131 17 33 2013
- Kumaran , S.T. , Ko , T.J. , Uthayakumar , M. , Khan , M.A. , and Muhammad , I. Some Experimental Investigations on Drilling AA (6351)-SiC-B4C Composite Materials and Manufacturing Processes 32 13 1557 1564 2017 10.1080/10426914.2017.1279311
- Dragatogiannis , D.,.A. , Koumoulos , E.,.P. , Kartsonakis , I.,.A. , Pantelis , D.,.I. et al. Dissimilar Friction Stir Welding between 5083 and 6082 Al Alloys Reinforced with TiC Nanoparticles Materials and Manufacturing Processes 31 16 2101 2114 2016 10.1080/10426914.2015.1103856
- Pantelis , D.,.I. , Karakizis , P.,.N. , Daniolos , N.,.M. , Charitidis , C.,.A. et al. Microstructural Study and Mechanical Properties of Dissimilar Friction Stir Welded AA5083-H111 and AA6082-T6 Reinforced with SiC Nanoparticles Materials and Manufacturing Processes 31 3 264 274 2016 10.1080/10426914.2015.1019095
- Ruirui , W. , Zheng , Y. , and Qiushu , L. Microstructure and Mechanical Properties of 7075 Al Alloy Based Composites with Al2O3 Nanoparticles International Journal of Cast Metals Research 30 6 337 340 2017 10.1080/13640461.2017.1316954
- Tan , A. , Teng , J. , Zeng , X. , Fu , D. , and Zhang , H. Fabrication of Aluminium Matrix Hybrid Composites Reinforced with SiC Microparticles and TiB2 Nanoparticles by Powder Metallurgy Powder Metallurgy 60 1 66 72 2017 10.1080/00325899.2016.1274816
- Ramnath , B.V. , Elanchezhian , C. , Jaivignesh , M. , Rajesh , S. et al. Evaluation of Mechanical Properties of Aluminium Alloy-Alumina-Boron Carbide Metal Matrix Composites Materials and Design 58 332 338 2014 10.1016/j.matdes.2014.01.068
- Patel , J.A. and Patel , C.P. Development of Al-SiC MMC by Bottom Pouring Stir Casting and Parametric Analysis on EDM Development 5 04 1994 2001 2018
- Davim , J.P. Machining: Fundamentals and Recent Advances Berlin Springer 2008
- Housaer , F. , Beclin , F. , Touzin , M. , Tingaud , D. et al. Interfacial Characterization in Carbon Nanotube Reinforced Aluminum Matrix Composites Materials Characterization 110 94 101 2015 10.1016/j.matchar.2015.10.014
- Gnanavelbabu , A. , Rajkumar , K. , and Saravanan , P. Investigation on the Cutting Quality Characteristics of Abrasive Water Jet Machining of AA6061-B4C-hBN Hybrid Metal Matrix Composites Materials and Manufacturing Processes 33 12 1313 1323 2018 10.1080/10426914.2018.1453146
- Kumar , R. and Dhiman , S. A Study of Sliding Wear Behaviors of Al-7075 Alloy and Al-7075 Hybrid Composite by Response Surface Methodology Analysis Materials and Design 50 351 359 2013 10.1016/j.matdes.2013.02.038
- Kannan , V. and Kannan , V.V. A Study on the Turning Characteristics and Optimization of MOS 2 P and SiCp-Reinforced Al-Si10Mg Metal Matrix Composites SAE Technical Paper 2018-28-0043 2018 10.4271/2018-28-0043
- Jeyasimman , D. , Sivasankaran , S. , Sivaprasad , K. , Narayanasamy , R. , and Kambali , R.S. An Investigation of the Synthesis, Consolidation and Mechanical Behaviour of Al 6061 Nanocomposites Reinforced by TiC Via Mechanical Alloying Materials and Design 57 394 404 2014 10.1016/j.matdes.2013.12.067
- Dhanalakshmi , S. , Mohanasundararaju , N. , Venkatakrishnan , P.G. Preparation and Mechanical Characterization of Stir Cast Hybrid Al7075-Al2O3-B4C Metal Matrix Composites Applied Mechanics and Materials 592 705 710 2014 10.4028/www.scientific.net/AMM.592-594.705
- Suresh , S. , Gowd , G.H. , and Kumar , M.D. Experimental Investigation on Mechanical Properties of Al 7075/Al 2 O 3/mg NMMC’s by Stir Casting Method Sādhanā 44 2 51 2019 10.1007/s12046-018-1021-9
- Suresh , S. , Gowd , G.H. , and Kumar , M.D. Mechanical Properties of AA 7075/Al 2 O 3/SiC Nano-Metal Matrix Composites by Stir-Casting Method Journal of the Institution of Engineers (India): Series D 100 1 43 53 2019 10.1007/s40033-019-00178-1
- Pugalethi , P. , Jayaraman , M. , Natarajan , A. Evaluation of Mechanical Properties of Aluminium Alloy 7075 Reinforced with SiC and Al2O3 Hybrid Metal Matrix Composites Applied Mechanics and Materials 766 246 251 2015 10.4028/www.scientific.net/AMM.766-767.246
- Rao , V.R. , Ramanaiah , N. , and Sarcar , M.M.M. Tribological Properties of Aluminium Metal Matrix Composites (AA7075 Reinforced with Titanium Carbide (TiC) Particles) International Journal of Advanced Science and Technology 88 13 26 2016 10.14257/ijast.2016.88.02
- Bandhu , D. , Thakur , A. , Purohit , R. , Verma , R.K. , and Abhishek , K. Characterization & Evaluation of Al7075 MMCs Reinforced with Ceramic Particulates and Influence of Age Hardening on their Tensile Behavior Journal of Mechanical Science and Technology 32 7 3123 3128 2018 10.1007/s12206-018-0615-9
- Ghoreishi , R. , Roohi , A.H. , and Ghadikolaei , A.D. Evaluation of Tool Wear in High-Speed Face Milling of Al/SiC Metal Matrix Composites Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 3 146 2019 10.1007/s40430-019-1649-3
- Basavarajappa , S. and Davim , J.P. Influence of Graphite Particles on Surface Roughness and Chip Formation Studies in Turning Metal Matrix Composites Materials Research 16 5 990 996 2013 10.1590/S1516-14392013005000098
- Manna , A. and Bhattacharayya , B. A Study on Machinability of Al/SiC-MMC Journal of Materials Processing Technology 140 1-3 711 716 2003 10.1016/S0924-0136(03)00905-1
- Bhushan , R.K. , Kumar , S. , and Das , S. Effect of Machining Parameters on Surface Roughness and Tool Wear for 7075 Al Alloy SiC Composite The International Journal of Advanced Manufacturing Technology 50 5-8 459 469 2010 10.1007/s00170-010-2529-2
- Bai , W. , Roy , A. , Sun , R. , and Silberschmidt , V.V. Enhanced Machinability of SiC-Reinforced Metal-Matrix Composite with Hybrid Turning Journal of Materials Processing Technology 268 149 161 2019 10.1016/j.jmatprotec.2019.01.017
- Krishnamurthy , L. , Sridhara , B.K. , and Budan , D.A. Comparative Study on the Machinability Aspects of Aluminium Silicon Carbide and Aluminium Graphite Composites Materials and Manufacturing Processes 22 7-8 903 908 2007 10.1080/10426910701451754
- Kannan , C. , Ramanujam , R. , and Balan , A.,.S.,.S. Machinability Studies on Al 7075/BN/Al2O3 Squeeze Cast Hybrid Nanocomposite under Different Machining Environments Materials and Manufacturing Processes 33 5 587 595 2018 10.1080/10426914.2017.1401718
- Koker , R. , Altinkok , N. , and Demir , A. Neural Network Based Prediction of Mechanical Properties of Particulate Reinforced Metal Matrix Composites Using Various Training Algorithms Materials and design 28 2 616 627 10.1016/j.matdes.2005.07.021
- Sahoo , A.K. and Pradhan , S. Modeling and Optimization of Al/SiCp MMC Machining Using Taguchi Approach Meas J Int Meas Confed 46 3064 3072 2013 10.1016/j.measurement.2013.06.001
- Sriprateep , K. , Patumchat , P. , and Theansuwan , W. Application of Taguchi Method in the Optimization of Cutting Parameters for Turning Metal Matrix Composite Advanced Material Research 189-193 3056 3060 2011 10.4028/www.scientific.net/AMR.189-193.3056
- Shetty , R. , Pai , R.B. , Rao , S.S. , and Nayak , R. Taguchi’s Technique in Machining of Metal Matrix Composites Journal of Brazilian Society of Mechanical Science Engineering 31 12 20 2009
- Roy , S.S. Design of Genetic-Fuzzy Expert System for Predicting Surface Finish in Ultra-Precision Diamond Turning of Metal Matrix Composite Journal of Material Processing Technolology 173 337 344 2006 10.1016/j.jmatprotec.2005.12.003
- Rajmohan , T. , Palanikumar , K. , and Kathirvel , M. Optimization of Machining Parameters in Drilling Hybrid Aluminium Metal Matrix Composites Transactions of Nonferrous Metals Society of China 22 6 1286 1297 2012 10.1016/S1003-6326(11)61317-4
- Bhushan , R.K. Multiresponse Optimization of Al Alloy-SiC Composite Machining Parameters for Minimum Tool Wear and Maximum Metal Removal Rate Journal of Manufacturing Science and Engineering 135 2 021013 2013 10.1115/1.4023454
- Derringer , G. and Suich , R. Simultaneous Optimization of Several Response Variables Journal of quality technology 12 4 214 219 1980 10.1080/00224065.1980.11980968