This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Cryogenic Treatment on Inconel 718 Produced by DMLS Technique
Technical Paper
2019-28-0140
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The main purpose of this study is to investigate additive manufactured Inconel super alloy subjected to cryogenic treatment (CT). Cryogenic treatment is mainly used in aerospace, defense and automobile application. Direct metal laser sintering is an additive manufacturing technique used for manufacturing of complex and complicated functional components. Inconel is an austenitic chromium nickel based super alloy often used in the applications which require high strength & temperature resistant. In this work, a study is carried out on microstructure and mechanical properties of additive manufactured Inconel 718 when subjected to cryogenic treatment at three different time intervals. The micro-structural evolution of IN718 super-alloy before and after CT was investigated by both optic microscope and scanning electron microscope. Surface roughness and hardness at different CT time intervals has also analyzed. Additionally, XRD technique was used to analyze the surface residual stress. The result shows after three cycles of cryogenic treatment, the hardness of Inconel 718 has been substantially improved at room temperature. Microstructure shows grains in one of the test condition, a larger number of refined and uniformly distributed strengthening precipitates which dispersed along the dislocation lines and grain boundaries and 26.9 % increase in macro hardness on surface. Micro hardness has been analyzed and found 30 % increase on surface of material due to effect of hardened matrix formed by precipitation hardening and grain size refinement.
Recommended Content
| Technical Paper | Effects of Surface Preparation, Support Structures and Build Orientation on the Cyclic Stress-Strain Behavior of Inconel®718 Produced by SLM |
| Aerospace Material Specification | Tungsten Heavy Alloy Shapes, Sintered, High Density |
| Aerospace Material Specification | Steel, Spring Wire 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) Annealed and Cold Drawn |
Authors
Topic
Citation
Naiju, C., Raja, K., Navin Kumar, N., Aditya, C. et al., "Effect of Cryogenic Treatment on Inconel 718 Produced by DMLS Technique," SAE Technical Paper 2019-28-0140, 2019, https://doi.org/10.4271/2019-28-0140.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 |
Also In
References
- Krol , M. and Tanski , T. Surface Quality Research for Selective Laser Melting of Ti-6al-4v Alloy Arch. Metall. Mater 61 3 1291 1296 2016
- Sanz , C. and Garcia , N.V. Structural Integrity of Direct Metal Laser Sintered Parts Subjected to Thermal and Finishing Treatments Journal of Materials Processing Technology 213 2126 2136 2013
- Ali , K. , Magda , S. , and Leila , L. Direct Metal Laser Melting of Inconel 718: Process Impact on Grain Formation and Orientation Journal of Alloys and Compounds 736 297 305 2018
- Mario , V. , Christopher , K. , Eric , J.F. , and Iwona , J. Induced Porosity in Super Alloy 718 through the Laser Additive Manufacturing Process: Microstructure and Mechanical Properties Journal of Alloys and Compounds 725 757 764 2017 10.1016/j.jallcom.2017.07.198
- Derek , H.S. , Jonathan , B. , Luke , J. , Brian , M.P. et al. Microstructure and Mechanical Behavior of Direct Metal Laser Sintered Inconel Alloy 718 Materials Characterization 113 1 9 2016 10.1016/j.matchar.2016.01.003
- Magda , S. , Leila , L. , William , B. , and John , R. Optimizing Quality of Additively Manufactured Inconel 718 Using Powder Bed Laser Melting Process Additive Manufacturing 11 60 70 2016
- Naiju , C.D. , Adithan , M. , and Radhakrishnan , P. Effect of Processing Parameters and Microstructural Defects on Fatigue Properties of Direct Metal Laser Sintered Bronze-Nickel Parts International Journal of Rapid Manufacturing 2 3 150 161 2011
- Sochalski-Kolbus , L.M. , Payzant , E.A. , Cornwell , P.A. , Watkins , T.R. et al. Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering The Minerals, Metals and Materials Society and ASM International 2015 10.1007/s11661-014-2722-2
- Becker , T. , Van , R.M. , and Dimitrov , D. Heat Treatment of Ti-6Al-4V Produced by Laser Cusing South African Journal of Industrial Engineering 26 2 93 103 2015
- Dunyong , D. , Ru , L.P. , Hakan , B. , and Johan , M. Microstructure and Mechanical Properties of Inconel 718 Produced by Selective Laser Melting: Sample Orientation Dependence and Effects of Post Heat Treatments Journal of Materials Science & Engineering 10.1016/j.msea.2017.12.043
- Konecna , R. , Nicoletto , G. , Kunz , L. , and Baca , A. Microstructure and Directional Fatigue Behavior of Inconel 718 Produced by Selective Laser Melting Procedia Structural Integrity 2 2381 2388 2016
- Amato , K.N. , Gaytan , S.M. , Murr , L. , Martinez , E. et al. Microstructures and Mechanical Behavior of Inconel 718 Fabricated by Selective Laser Melting Acta Materialia 60 2229 2239 2012 10.1016/j.actamat.2011.12.032
- Tanja , T. , Johannes , S. , Rainer , V. , and Uwe , G. Microstructure and Mechanical Properties of Selective Laser Melted Inconel 718 Compared to Forging and Casting Materials Letters 164 428 431 2016
- Jing , L. , Jianzhong , Z. , Suqiang , X. , Jie , S. et al. Effects of Cryogenic Treatment on Mechanical Properties and Microstructures of IN718 Super-Alloy Materials Science & Engineering, A 707 612 619 2017
- Kaixuan , G. , Hong , Z. , Bing , Z. , Junjie , W. et al. Effect of Cryogenic Treatment and Aging Treatment on the Tensile Properties and Microstructure of Ti-6Al-4V Alloy Materials Science & Engineering A584 170 176 2013
- Yoshinori , O. , Tetsumi , Y. , Hideshi , S. , Etsuo , T. et al. High-Cycle Fatigue Properties at Cryogenic Temperatures in Inconel 718 Nickel-Based Super Alloy Materials Transactions 45 2 342 345 2004
- Santosh Manjunatha , L.H. , Lokesha , M. , and Ajaykumar , B.S. A Review : Mechanical Properties of HSS Steel by Deep Cryo-Treatment IOP Conf. Series: Materials Science and Engineering 376 012098 2018 10.1088/1757-899X/376/1/012098
- Volker , F.S. , Edgar , S.A. , Lutz , R. , Jose , A.A. Effect of a Deep Cryogenic Treatment on Wear and Microstructure of a 6101 Aluminum Alloy Advances in Materials Science and Engineering 2016
- Bouzada , F. , Cabeza , M. , Merino , P. , and Trillo , S. Effect of Deep Cryogenic Treatment on the Microstructure of an Aerospace Aluminum Alloy Advanced Materials Research 445 965 970 2012