This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Taguchi Based Vikor Method for Optimization of Cutting Parameters for Improving the Efficiency in Machining Process by Considering the Effect of Tool Nose Radius
Technical Paper
2019-28-0138
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
In order to take advantage of the machining characteristics of magnesium it is useful to consider recommended tool design and angles. The geometry of the tool can have a large influence on the machining process. Tool geometry can be used to aid with chip flow and clearance, reduce excessive heat generation, reduce tool build up, enable greater feed rates to be employed and improved tool life. This paper presents a new approach for the optimization of Machining parameters on face Milling of ZE41 with multiple responses based on Taughi orthogonal array with VIKOR. Machining tests are carried out 12 mm diameter of insert having 1 flute under dry condition. In this study, Machining parameters namely cutting speed, feed and Depth of Cut and Tool Node radius are optimized with the considerations of multi responses such as surface roughness, Material Removal rate, Tool Wear and Trust Force. A VIKOR grade is obtained from the VIKOR analysis. Based on the VIKOR grade, optimum levels of parameters have been identified and significant contribution of parameters is determined by ANOVA. Confirmation test is conducted to validate the test result. Experimental results have shown that the responses in Machining process can be improved effectively through the VIKOR approach.
Authors
- Sundar Singh Sivam Sundarlingam Paramasivam - SRM Institute Of Science And Technology
- Ganesh Babu Loganathan - Tishk International University
- Durai Kumaran - SRM Institute Of Science And Technology
- Krishnaswamy Saravanan - SRM Institute Of Science And Technology
- Harish Sriram - SRM Institute Of Science And Technology
Citation
Sivam Sundarlingam Paramasivam, S., Loganathan, G., Kumaran, D., Saravanan, K. et al., "Taguchi Based Vikor Method for Optimization of Cutting Parameters for Improving the Efficiency in Machining Process by Considering the Effect of Tool Nose Radius," SAE Technical Paper 2019-28-0138, 2019, https://doi.org/10.4271/2019-28-0138.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
Unnamed Dataset 7 | ||
Unnamed Dataset 8 | ||
Unnamed Dataset 9 | ||
Unnamed Dataset 10 | ||
Unnamed Dataset 11 | ||
Unnamed Dataset 12 |
Also In
References
- Chan , J.W.K. and Tong , T.K.L. Multi-Criteria Material Selections and End-Of-Life Product Strategy: Grey Relational Analysis Approach Materials & Design. 28 5 1539 1546 2007 10.1016/j.matdes.2006.02.016
- Tzeng , Y.F. and Chen , F.C. Multi Objective Process Optimisation for Turning of Tool Steels International Journal of Machining and Machinability of Materials. 1 1 76 93 2006 10.1504/IJMMM.2006.010659
- Sahoo , A.K. , Baral , A.N. , Rout , A.K. , and Routra , B.C. Multi-Objective Optimization and Predictive Modelling of Surface Roughness and Material Removal Rate in Turning Using Grey Relational and Regression Analysis Procedia Engineering. 38 1606 1627 2012 10.1016/j.proeng.2012.06.197
- Sivam , S.P.S.S. , UmaSekar , V.G. , Saravanan , K. , RajendraKumar , S. et al. Frequently Used Anisotropic Yield Criteria for Sheet Metal Applications: a Review Indian Journal of Science and Technology 9 47 December 2016 10.17485/ijst/2015/v8i1/92107
- Tzeng , C.J. , Lin , Y.H. , Yang , Y.K. , and Jeng , M.C. Optimization of Turning Operations with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis Journal of Materials Processing Technology. 209 6 2753 2759 2009 10.1016/j.jmatprotec.2008.06.046
- Tosun , N. Determination of Optimum Parameters for Multi-Performance Characteristics in Turning by Using Grey Relational Analysis International Journal of Advanced Manufacturing Technology. 28 5-6 450 455 2006 10.1007/s00170-004-2386-y
- Sivam , S.P.S.S. , Umasekar , V.G. , Mishra , A. , Mishra , S. , and Mondal , A. Orbital Cold Forming Technology - Combining High Quality Forming with Cost Effectiveness - A Review Indian Journal of Science and Technology 9 38 October 2016 10.17485/ijst/2016/ v9i38/91426
- Chang , C.K. and Lu , H.S. Design Optimization of Cutting Parameters for Side Milling Operations with Multiple Performance Characteristics International Journal of Advanced Manufacturing Technology. 32 1-2 18 26 2007 10.1007/s00170-005-0313-5
- Datta , S. , Bandyopadhyay , A. , and Pal , P.K. Grey-Based Taguchi Method for Optimization of Bead Geometry in Submerged Arc Bead-On-Plate Welding International Journal of Advanced Manufacturing Technology. 39 11-12 1136 1143 2008 10.1007/s00170-007-1283-6
- Chakradhar , D. and VenuGopal , A. Multi-Objective Optimization of Electrochemical Machining of EN31 Steel by Grey Relational Analysis International Journal of Modeling and Optimization. 1 2 113 117 2011 10.7763/IJMO.2011.V1.20
- Hrelja , M. , Klancnik , S. , Irgolic , T. , Paulic , M. et al. Particle Swarm Optimization Approach for Modelling a Turning Process Advances in Production Engineering & Management. 9 1 21 30 2014 10.14743/apem2014.1.173
- Nalbant , M. , Gökkaya , H. , and Sur , G. Application of Taguchi Method in the Optimization of Cutting Parameters for Surface Roughness in Turning Materials & Design 28 1379 1385 2007
- Nian , C.Y. , Yang , W.H. , and Tarng , Y.S. Optimization of Turning Operations with Multiple Performance Characteristics Journal of Materials Processing Technology 95 90 96 1999
- Sivam , S.P.S.S. , Gopal , M. , Venkatasamy , S. , and Singh , S. An Experimental Investigation And Optimisation Of Ecological Machining Parameters On Aluminium 6063 In Its Annealed And Unannealed Form Journal Of Chemical And Pharmaceutical Sciences. Page 46 53 2015
- Sivam , S.P.S.S. , Gopal , M. , Venkatasamy , S. , and Singh , S. Application of Forming Limit Diagram and Yield Surface Diagram to Study Anisotropic Mechanical Properties of Annealed and Unannealed SPRC 440E Steels Journal of Chemical and Pharmaceutical Sciences. 15 22 2015
- Chang , C.K. and Lu , H.S. Design Optimization of Cutting Parameters for Side Milling Operations with Multiple Performance Characteristics International Journal of Advanced Manufacturing Technology. 32 1-2 18 26 2007 10.1007/s00170-005-0313-5
- Chakradhar , D. and Venu Gopal , A. Multi-Objective Optimization of Electrochemical Machining of EN31 Steel by Grey Relational Analysis International Journal of Modeling and Optimization. 1 2 113 117 2011 10.7763/IJMO.2011.V1.20
- Gupta , M. and Kumar , S. Multi-Objective Optimization of Cutting Parameters in Turning Using Grey Relational Analysis International Journal of Industrial Engineering Computations 4 547 558 2013
- Fung , C.P. Manufacturing Process Optimization for Wear Property of Fiber-Reinforced Polybutylene Terephthalate Composites with Grey Relational Analysis Wear 254 298 306 2003
- Gopalsamy , B.M. , Mondal , B. , and Ghosh , S. Optimisation of Machining Parameters for Hard Machining: Grey Relational Theory Approach and ANOVA International Journal of Advanced Manufacturing Technology 45 1068 1086 2009
- Dewangan , S. and Biswas , C.K. Optimization of Machining Parameters Using Grey Relation Analysis for EDM with Impulse Flushing International Journal for Mechatronics and Manufacturing Systems 6 144 158 2013
- Sivam , S.P.S. Sivam , S. , RajendraKumar , S. , Rajasekaran , A. , and Karuppiah , S. Prediction Model of Setting Input Parameters for Turning Operation TI-6AL-4V by Fuzzy Rule based Modeling 2017 IEEE International Conference on Power, Control, Signals and Instrumentation Engineering (ICPCSI) Chennai, India 2017 1343 1349 10.1109/ICPCSI.2017.8391929
- Sivam , S.P. Singh , S. et al. Multi Response Optimization of Setting Input Variables for Getting Better Product Quality in Machining of Magnesium AM60 by Grey Relation Analysis and ANOVA Periodica Polytechnica Mechanical Engineering 2017 https://doi.org/10.3311/PPme.11034
- Sivam , S.P.S.S. , Abburi , L.K. , Sathiya , M.K. , and Rajendra , K. Investigation Exploration Outcome of Heat Treatment on Corrosion Resistance of AA 5083 in Marine Application International Journal of Chemical Sciences 14 2016
- Sundar Singh Sivam , S.P. , Ji Bhat , M.D. , Natarajan , S. , and Chauhan , N. Analysis of Residual Stresses, Thermal Stresses, Cutting Forces and Other Output Responses of Face Milling Operation on ze41 Magnesium Alloy International Journal of Modern Manufacturing Technologies 92 100
- Sivam , S.P.S.S. , Saravanan , K. , Pradeep , N. , Moorthy , K. , and Rajendrakumar , S.“.T. Grey Relational Analysis and Anova to Determine the Optimum Process Parameters for Friction Stir Welding of Ti and Mg Alloys Periodica Polytechnica Mechanical Engineering. https://doi.org/10.3311/PPme.12117
- Sivam , S.P.S.S. , RajendraKumar , S. , Karuppiah , S. , and Rajasekaran , A. Competitive Study of Engineering Change Process Management in Manufacturing Industry Using Product Life Cycle Management - A Case Study 2017 International Conference on Inventive Computing and Informatics (ICICI), Coimbatore 2017 76 81 10.1109/ICICI.2017.8365247
- Priemus , H. How to Make Housing Sustainable? The Dutch Experience Environ. Plan. B Plan. Des. 32 5 19 2005
- Derringer , G. and Suich , R. Simultaneous Optimization of Several Response Variables J Qual Technol 12 214 219 1980
- Khuri , A.I. and Conlon , M. Simultaneous Optimization of Multiple Responses Represented by Polynomial Regression Functions Technometrics 23 363 375 1981
- Logothetis , N. and Haigh , A. Characterizing and Optimizing Multi-Response Processes by the Taguchi Method Qual Reliab Eng Int 4 159 169 1988
- Phadke , M.S. Quality Engineering Using Robust Design Prentice-Hall 1989
- Su , C.T. and Hsieh , K.L. Applying Neural Networks to Achieve Robust Design for Dynamic Quality Characteristic Int J Qual Reliab Manage 15 4-5 509 519 1998
- Tong , L.I. and Hsieh , K.L. A Novel Means of Applying Artificial Neural Networks to Optimize Multi-Response Problem Qual Eng 13 1 11 18 2000
- Su , C.T. and Tong , L.I. Multi-Response Robust Design by Principal Component Analysis Total Qual Manag 8 409 416 1997
- Antony , J. Multi-Response Optimization in Industrial Experiments Using Taguchi’s Quality Loss Function and Principal Component Analysis Qual Reliab Eng Int 16 3 8 2000
- Keshavarz Ghorabaee , M. Developing an MCDM Method for Robot Selection with Interval Type-2 Fuzzy Sets Robot. Comput. Integr. Manuf. 37 221 232 2015
- Anvari , A. , Zulkifli , N. , and Arghish , O. Application of a Modified VIKOR Method for Decision-Making Problems in Lean Tool Selection Int. J. Adv. Manuf. Technol. 71 829 841 2014
- Sundar Singh Sivam , S.P. , Loganathan , G.B. , Saravanan , K. et al. Experimental Study and Ignition Fire Risk Mapping on Friction Stir Welding Parameters of Dissimilar Alloys for the Benefits of Environment Materials Today: proceedings 10.1016/j.matpr.2019.06.652
- Peng , J.-P. , Yeh , W.-C. , Lai , T.-C. , and Hsu , C.-B. The Incorporation of the Taguchi and the VIKOR Methods to Optimize Multi-Response Problems in Intuitionistic Fuzzy Environments J. Chin. Inst. Eng. 37 897 907 2015
- Tzeng , G.-H. and Huang , C.-Y. Combined DEMATEL Technique with Hybrid MCDM Methods for Creating the Aspired Intelligent Global Manufacturing and Logistics Systems Ann. Oper. Res. 197 159 190 2012
- Mousavi , S.M. , Torabi , S.A. , and Tavakkoli-Moghaddam , R. A Hierarchical Group Decision-Making Approach for New Product Selection in a Fuzzy Environment Arab. J. Sci. Eng. 38 3233 3248 2013
- Büyüközkan , G. and Görener , A. Evaluation of Product Development Partners Using an Integrated AHP-VIKOR Model Kybernetes 44 220 237 2015
- Zhu , G.-N. , Hu , J. , Qi , J. , Gu , C.-C. , and Peng , Y.-H. An Integrated AHP and VIKOR for Design Concept Evaluation Based on Rough Number Adv. Eng. Inform. 29 408 418 2015
- Yu , P.L. A Class of Solutions for Group Decision Problems Management Science 19 936 946 1973
- Zeleny , M. Multiple Criteria Decision Making New York McGraw Hill 1982
- Opricovic , S. and Tzeng , G.H. Compromise Solution by MCDM Methods: A Comparative Analysis of VIKOR and TOPSIS European Journal of Operational Research 156 445 455 2004
- Tzeng , G.H. , Tsaur , S.H. , Laiw , Y.D. , and Opricovic , S. Multicriteria Analysis of Environmental Quality in Taipei: Public Preferences and Improvement Strategies Journal of Environmental Management 65 109 120 2002
- Sivam , S.P.S.S. , Loganathan , G.B. , Umasekar , V.G. , Suresh Kumar , P.S. , and Raja , S. Study on Micro structural Characteristics and Mechanical Behaviour of AISI1050 Steel under Various Heat Treatments Int. J. Vehicle Structures & Systems 11 1 15 20 2019 10.4273/ijvss.11.1.04
- Sivam , S.P.S.S. , Loganathan , G.B. , Saravanan , K. , Umasekar , V.G. , and Rameez , T.P.M. Optimization of Passenger Car Door Impact Beam using Quasi Static CAE Analysis Int. J. Vehicle Structures & Systems 11 1 21 26 2019 10.4273/ijvss.11.1.05
- Sivam , S.P.S.S. , Saravanan , K. , Loganathan , G.B. , Kumaran , D. , and Rajendrakumar , S. Root Cause Analysis for Failure of Door Lock Case Assembly during Caulking Process Int. J. Vehicle Structures & Systems 11 1 11 14 2019 10.4273/ijvss.11.1.03
- Sivam , S.P.S.S. , Loganathan , G.B. , Saravanan , K. , Umasekar , V.G. , and Rajendrakumar , S. Numerical Evaluation and Influence of Product Quality and its Defects Measures on the Drawing of Stainless Steel Cross Member for Automobiles Int. J. Vehicle Structures & Systems 11 1 107 112 2019 10.4273/ijvss.11.1.19
- Sivam , S.P.S.S. , Umasekar , V.G. , Loganathan , G.B. , Kumaran , D. , and Rajendrakumar , S. Multi Response Optimization of Setting Process Variables in Face Milling of ZE41 Magnesium Alloy using Ranking Algorithms and ANOVA Int. J. Vehicle Structures & Systems 11 1 47 56 2019 10.4273/ijvss.11.1.10