This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Investigation of Setting Input Process Parameters for Getting Better Product Quality in Machining of AM60 Magnesium Alloy - TOPSIS and ANOVA Approach
Technical Paper
2019-28-0136
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
This investigation shows the improvement of Machining parameters on AM-60 Mg alloy made with the help of Gravity Die Casting and with reactions upheld symmetrical cluster with “Technique for Order Preference by Similarity to Ideal Solution” (TOPSIS). Which Focuses on the streamlining of Machining parameters utilizing the system to get least surface Roughness (Ra), Minimum Tool Wear, minimum Cutting Time, Power Requirement and Torque and Maximize MRR. A good amount of Machining tests was directed in view of the L9 Orthogonal array on CNC machine. The trials were performed on AM60 utilizing cutting device of grade-ISO 460.1-1140-034A0-XM GC3 of 12,16 and 25 mm width with cutting point of 140 degrees, all throughout the test work under various cutting conditions. TOPSIS and ANOVA were utilized to work out the major vital parameters like Cutting speed, feed rate, Depth of Cut and Tool Diameter which influence the Response. The normal qualities and estimated esteems are genuinely close. The given model can be utilized to choose the level of Machining parameters.
Authors
- Ganesh Babu Loganathan - Tishk International University
- Krishnaswamy Saravanan - SRM Institute of Science and Technology
- Raj Rajendran - SRM Institute of Science and Technology
- Sundar Singh Sivam Sundarlingam Paramasivam - SRM Institute of Science and Technology
- Durai Kumaran - SRM Institute of Science and Technology
- Harish Sriram - SRM Institute of Science and Technology
Topic
Citation
Loganathan, G., Saravanan, K., Rajendran, R., Sivam Sundarlingam Paramasivam, S. et al., "Investigation of Setting Input Process Parameters for Getting Better Product Quality in Machining of AM60 Magnesium Alloy - TOPSIS and ANOVA Approach," SAE Technical Paper 2019-28-0136, 2019, https://doi.org/10.4271/2019-28-0136.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Unnamed Dataset 5 | ||
| Unnamed Dataset 6 | ||
| Unnamed Dataset 7 | ||
| Unnamed Dataset 8 | ||
| Unnamed Dataset 9 | ||
| Unnamed Dataset 10 | ||
| Unnamed Dataset 11 | ||
| Unnamed Dataset 12 | ||
| Unnamed Dataset 13 | ||
| Unnamed Dataset 14 | ||
| Unnamed Dataset 15 | ||
| Unnamed Dataset 16 |
Also In
References
- Davim , J.P. Study of Machining Metal-Matrix Composites Based on the Taguchi Techniques J Mater Process Technol 132 250 254 2003
- Mustafa , K.K. Magnesium and its Alloys Applications in Automotive Industry International Journal of Advanced Manufacturing Technology 39 851 865 2008
- Eliezer , A. , Haddad , J. , Unigovski , Y. , and Gutman , E.M. Static and Dynamic Corrosion Fatigue of mg Alloys Used in Automotive Industry Materials and Manufacturing Processes 20 75 88 2005
- Campbell , F.C. Manufacturing Technology for Aerospace Structure Material 93 United Kingdom Elsevier Press 2006
- Ambat , R. and Zhou , W. Electroless Nickel-Plating on AZ91D Magnesium Alloy: Effect of Substrate Microstructure and Plating Parameters Surface and Coatings Technology 179 124 134 2004
- Huang , Y.J. , Hu , B.H. , Pinwill , I. , Zhou , W. , and Taplin , D.M.R. Effects of Process Setting on the Porosity Levels of AM60B Magnesium Die Castings Materials and Manufacturing Processes 15 97 105 2000
- Henry , H. , Alfred , Y. , Naiyi , L. , and John , E.A. Potential Magnesium Alloys for High Temperature Die Cast Automotive Applications: A Review Materials and Manufacturing Processes 18 687 717 2003
- Kainer , K.U. ; von Buch , F. Modern Development of Alloys for Light Weight Components Materialwissenschaft Und Werkstofftechnik 1999 30 159 167
- Sreejith , P.S. and Ngoi , B.K.A. Dry Machining: Machining of the Future Journal of Materials Processing Technology 101 287 291 2000
- Abukhshim , N.A. , Mativenga , P.T. , and Sheikh , M.A. Heat Generation and Temperature Prediction in Metal Cutting: A Review and Implications for High Speed Machining International Journal of Machine Tools and Manufacture 46 782 800 2006
- Kitagawa , T. , Kubo , A. , and Maekawa , K. Temperature and Wear of Cutting Tools in High-Speed Machining of Inconel 718 and Ti-6Al-6V-2Sn Wear 202 2 142 148 1997
- Schirsch , R. , Thamke , D. , and Zielasko , W. Wirtschaftlichkeit der Trockenbearbeitung, TrockenbearbeitungprismatischerTeile VDIBerichte 1375 371 397 1998
- Weinert , K. , Adams , F. J. , Thamke , D. Was kostet die Kühlschmierung? Technica 44 19 23 1995
- Thamke , D. 1998
- Sivam , S.P.S.S. , Loganathan , G.B. , Saravanan , K. et al. Experimental Study and Ignition Fire Risk Mapping on Friction Stir Welding Parameters of Dissimilar Alloys for the Benefits of Environment Materials Today: Proceedings 10.1016/j.matpr.2019.06.652
- Chen , Z. , Wong , K. , Li , W. , Stephenson , D.A. , and Liang , S.Y. Cutting Fluid Aerosol Generation due to Spin-off in Turning Operation Symposium on Manufacturing Science and Engineering, Conference Proc., ASME 10 285 291 1999
- Gunter , K.L. and Sutherland , J.W. An Experimental Investigation into the Effect of Process Conditions on the Mass Concentration of Cutting Fluid Mist in Turning Journal of Cleaner Production 7 5 341 350 1999
- Hands , D.M. , Sheehan , J. , Wong , B. , and Lick , H.B. Comparison of Metalworking Fluid Mist Exposures from Machining with Different Levels of Machine Enclosure American Industrial Hygiene Association Journal 57 12 1173 1178 1996
- Howes , T.D. , Tönshoff , H.K. , and Heuer , W. Environmental Aspects of Grinding Fluids Annals of the CIRP 40 2 623 630 1991
- Rossmoore , H.W. Microbiology of Metalworking Fluids: Deterioration, Disease, and Disposal, Lubrication Engineering 51/2 1995 113 130
- Aronson , R.B. Why Dry Machining? Manufacturing Engineering 114/1 33 36 1995
- Klocke , F. , Lung , D. , and Eisenblätter , G. Mindermengenkühlschmierung - eine Alternative zurNassberarbeitung? VDI-Berichte 1240 159190 1996
- Sivam , S.P.S.S. , Uma sekar , V.G. , Mishra , S. , Mishra , A. , and Mondal , A. Orbital Cold Forming Technology - Combining High Quality Forming with Cost Effectiveness - A Review Indian Journal of Science and Technology 9 38 October 2016 10.17485/ijst/2016/v9i38/91426
- Sutherland , J.W. , Kulur , V.N. , and King , N.C. An Experimental Investigation of Air Quality in Wet and Dry Turning Annals of the CIRP 49 1 61 64 2000
- Sundar Singh , S.P.S.S. , Uma Sekar , V.G. , Saravanan , K. , Rajendra Kumar , S. et al. Frequently Used Anisotropic Yield Criteria for Sheet Metal Applications: A Review Indian Journal of Science and Technology 9 47 December 2016 10.17485/ijst/2015/v8i1/92107
- Daniel , C. M. , Olson , W. W. , Sutherland , J. W. 1997 Research Advances in Dry and Semi-Dry Machining SAE Technical Paper 970415 1997 10.4271/970415 106 373 383
- Sivam , S.P.S.S. , Gopal , M. , Venkatasamy , S. , and Singh , S. An Experimental Investigation and Optimisation of Ecological Machining Parameters on Aluminium 6063 in its Annealed and Unannealed Form Journal of Chemical and Pharmaceutical Sciences 46 53 2015
- König , W. Fertigungsverfahren I-Drehen Bohren, Springer-Verlag, Berlin Heidelberg Fräsen 1999
- Sivam , S.P.S.S. , Sekar , V.G.U. , Saravanan , K. , Kumar , S.R. et al. Frequently Used Anisotropic Yield Criteria for Sheet Metal Applications: A Review Indian Journal of Science and Technology 9 47 December 2016 10.17485/ijst/2015/v8i1/92107
- Sundar Singh , S.P. , Saravanan , K. , Pradeep , N. , Rajendra Kumar , S. , and Karuppiah , S. Comparison of Manufacturing Data Analysis for 5 & 3-Axis Vertical Machining Center for the Time and Tool Benefits of Industries International Journal of Engineering & Technology 7 4.5 196 201 2018 10.14419/ijet.v7i4.5.20044
- Sundar Singh , S.P. , Saravanan , K. , Pradeep , N. , Rajendra Kumar , S. et al. Development of Vibrator Feeding Mechanism Using Two Sets of Rollers for the Separation of Ball Grading for Industry Benefits International Journal of Engineering & Technology 7 4.5 202 206 2018 10.14419/ijet.v7i4.5.20045
- Sundar Singh , S.P. , Kumar , A.L. , Moorthy , K.S. , and Kumar , R. Investigation Exploration Outcome of Heat Treatment on Corrosion Resistance of AA 5083 in Marine Application International Journal of Chemical Sciences 15 22 2015 0972-768 X
- S.P. Sundar Singh Multi Response Optimization of Setting Input Variables for Getting Better Product Quality in Machining of Magnesium AM60 by Grey Relation Analysis and ANOVA Periodica Polytechnica Mechanical Engineering S.l 2017 1587-379X 10.3311/PPme.11034
- Sundar Singh , S.P. , Bhat , M.D.J. , Natarajan , S. , and Chauhan , N. Analysis of Residual Stresses, Thermal Stresses, Cutting Forces and Other Output Responses of Face Milling Operation on ze41 Magnesium Alloy International Journal of Modern Manufacturing Technologies X 1 92 100 2018 2067-3604
- Sivam , S.P.S.S. , Saravanan , K. , Pradeep , N. , Moorthy , K. , and Rajendrakumar , S. The Grey Relational Analysis and Anova to Determine the Optimum Process Parameters for Friction Stir Welding of Ti and mg Alloys Periodica Polytechnica Mechanical Engineering. 10.3311/PPme.12117
- Sivam , S. P. S. S. , Rajendra Kumar , S. , Karuppiah , S. and Rajasekaran , A. Competitive Study of Engineering Change Process Management in Manufacturing Industry Using Product Life Cycle Management - A Case Study 2017 International Conference on Inventive Computing and Informatics (ICICI) Coimbatore 2017 76 81 10.1109/ICICI.2017.8365247
- Sivam , S.P.S.S. , Loganathan , G.B. , Umasekar , V.G. , Suresh Kumar , P.S. , and Raja , S. Study on Micro Structural Characteristics and Mechanical Behaviour of AISI1050 Steel under Various Heat Treatments Int. J. Vehicle Structures & Systems 11 1 15 20 2019 10.4273/ijvss.11.1.04
- Sivam , S.P.S.S. , Loganathan , G.B. , Saravanan , K. , Umasekar , V.G. , and Rameez , T.P.M. Optimization of Passenger Car Door Impact Beam Using Quasi Static CAE Analysis Int. J. Vehicle Structures & Systems 11 1 21 26 2019 10.4273/ijvss.11.1.05
- Sivam , S.P.S.S. , Saravanan , K. , Loganathan , G.B. , Kumaran , D. , and Rajendrakumar , S. Root Cause Analysis for Failure of Door Lock Case Assembly during Caulking Process Int. J. Vehicle Structures & Systems 11 1 11 14 2019 10.4273/ijvss.11.1.03
- Sivam , S.P.S.S. , Loganathan , G.B. , Saravanan , K. , Umasekar , V.G. , and Rajendrakumar , S. Numerical Evaluation and Influence of Product Quality and its Defects Measures on the Drawing of Stainless Steel Cross Member for Automobiles Int. J. Vehicle Structures & Systems 11 1 107 112 2019 10.4273/ijvss.11.1.19
- Sundar Singh Sivam , S.P. , Loganathan , G.B. , Saravanan , K. et al. Experimental Study and Ignition Fire Risk Mapping on Friction Stir Welding Parameters of Dissimilar Alloys for the Benefits of Environment Materials Today: Proceedings 10.1016/j.matpr.2019.06.652
- Sivam , S.P.S.S. , Umasekar , V.G. , Loganathan , G.B. , Kumaran , D. , and Rajendrakumar , S. Multi Response Optimization of Setting Process Variables in Face Milling of ZE41 Magnesium Alloy Using Ranking Algorithms and ANOVA Int. J. Vehicle Structures & Systems 11 1 47 56 2019 10.4273/ijvss.11.1.10