This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Tensile and Fatigue Behavior of Shallow Cryogenically Treated EN19 Alloy Steel
ISSN: 0148-7191, e-ISSN: 2688-3627
Published October 11, 2019 by SAE International in United States
This content contains downloadable datasetsAnnotation ability available
Event: International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility
Tensile and axial fatigue tests were conducted on shallow cryogenically treated EN19 medium carbon alloy steel to investigate its mechanical behavior. The test samples were conventionally heat treated then oil quenched at room temperature. Followed by the samples were kept for shallow cryogenic treatment to -80°C for 8 hours using liquid nitrogen. Then the samples were tempered in a muffle furnace to relieve the induced residual stresses. Tensile and axial fatigue test were carried out on both treated and non-treated samples to measure its tensile strength and fatigue behavior respectively. Microscopic examination also had done to compare the effect of shallow cryogenic treatment on its microstructure. The results exposed that there is an increase in the tensile strength and reduction in fatigue life of shallow cryogenically treated samples over base metal and improved wear resistance.
CitationSekar, L., Raj, R., and Arasan, T., "Tensile and Fatigue Behavior of Shallow Cryogenically Treated EN19 Alloy Steel," SAE Technical Paper 2019-28-0100, 2019, https://doi.org/10.4271/2019-28-0100.
Data Sets - Support Documents
|[Unnamed Dataset 1]|
- Kalsi, N.S., Sehgal, R., and Sharma, V.S. , “Cryogenic Treatment of Tool Materials: A Review,” Materials and Manufacturing Processes 25:1077-1100, 2010, doi:10.1080/10426911003720862.
- Senthilkumar, D. and Rajendran, I. , “Influence of Shallow and Deep Cryogenic Treatment on Tribological Behavior of EN 19 Steel,” Journal of Iron and Steel Research, International 18(9):53-59, 2011.
- Bensly, A., Senthilkumar, D., Mohan Lal, D., Nagarajan, G., and Rajadurai, A. , “Effect of Cryogenic Treatment on Tensile Behavior of Case Carburized Steel-815M17,” Materials Characterization 58:485-491, 2007, doi:10.1016/j.matchar.2006.06.019.
- Rajendran, I., Senthilkumar, D., Pellizzari, M., and Siiriainen, J. , “Influence of Shallow and Deep Cryogenic Treatment on the Residual State of Stress of 4140 Steel,” Journal of Materials Processing Technology 211:396-401, 2011, doi:10.1016/j.jmatprotec.2010.10.018.
- Perez, M. and Belzunce, F.J. , “The Effect of Deep Cryogenic Treatments on the Mechanical Properties of an AISI H13 Steel,” Materials Science & Engineering A 624:32-40, 2015, doi:10.1016/j.msea.2014.11.051.
- Baldissera, P. , “Fatigue Scatter Reduction through Deep Cryogenic Treatment on the 18NiCrMo5 Carburized Steel,” Materials and Design 30:3636-3642, 2009, doi:10.1016/j.matdes.2009.02.019.
- Joseph Vimal, A., Bensley, A., Lal, D.M., and Srinivasan, K. , “Deep Cryogenic Treatment Improves Wear Resistance of EN 31 Steel,” Mater Manuf Process 23(4):369-376, 2008, doi:10.1080/10426910801938098.
- Senthilkumar, D. , “Cryogenic Treatment: Shallow and Deep, Cryogenic Treatment: Shallow and Deep, in Encyclopedia of Iron, Steel, and Their Alloys (New York: Taylor & Francis), 995-1007, doi:10.1081/E-EISA-120052805.