This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Machinability and Parametric Optimization of Inconel 600 Using Taguchi-Desirability Analysis under Dry Environment
Technical Paper
2019-28-0068
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Sector:
Language:
English
Abstract
Inconel 600 is a face-centered cubic structure and nickel-chromium alloy. Alloy 600 has good resistance to oxidation, corrosion-resistant, excellent mechanical properties, and good creep rupture strength at a higher temperature. Alloy 600 is used in heat treating, phenol condensers, chemical and food processing, soap manufacture, vegetable, and fatty acid vessels. In this context, the present paper investigates the machinability characteristics of Alloy 600 under dry environment. Also, the parametric effect of cutting speed, feed rate, and cutting depth on the force, surface roughness, and tool wear is carried out using 3-Dimensional surface and 1-Dimensional plots. The optimal parameters are determined systematically based on Taguchi-desirability analysis with turned with TiAlN coated carbide insert. From the graphical analysis of collected data, the low rate of feed and moderate cutting for roughness and cutting force and average feed rate for tool wear with low cutting depth. Probability test at 95% confidence reveals the residual of machining data falls reasonably on a straight line and can be taken for factor optimization. Variance test reveals that the cutting depth (68.34%) has the most substantial influence on responses. Optical examination shows abrasive wear, and adhesion is a tool to wear styles at investigated machining parameters. Chips geometries are found to be affected by feed rate and cutting depth that of cutting speed at the studied parameters.
Authors
Citation
Kannan, V., Sundararajan, D., Chahal, A., and Raj, D., "Machinability and Parametric Optimization of Inconel 600 Using Taguchi-Desirability Analysis under Dry Environment," SAE Technical Paper 2019-28-0068, 2019, https://doi.org/10.4271/2019-28-0068.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Unnamed Dataset 5 |
Also In
References
- http://www.specialmetals.com/assets/smc/documents/alloys/inconel/inconel-alloy-600.pdf
- Hao , Z.P. , Lu , Y. , Gao , D. , Fan , Y.H. , and Chang , Y.L. Cutting Parameter Optimization Based on Optimal Cutting Temperature in Machining Incone l718 Materials and Manufacturing Processes 27 10 1084 1089 2012 10.1080/10426914.2012.689456
- Wang , F. , Liu , Y. , Shen , Y. , Ji , R. et al. Machining Performance of Inconel 718 Using High Current Density Electrical Discharge Milling Materials and Manufacturing Processes 28 10 1147 1152 2013 10.1080/10426914.2013.822985
- Jadhav , D.B. , Jadhav , P.V. , Bilgi , D.S. , and Sawant , A.A. Experimental Investigation of MRR on Inconel 600 Using Ultrasonic Assisted Pulse Electrochemical Machining IOP Conference Series: Materials Science and Engineering 377 1 012095 2018 10.1088/1757-899X/377/1/012095
- Mindivan , F. and Mindivan , H. Comparisons of Wear Performance of Hardened Inconel 600 by Different Nitriding Processes Procedia Engineering 68 730 735 2013 10.1016/j.proeng.2013.12.246
- Banker , V.J. , Mistry , J.M. , Thakor , M.R. , and Upadhyay , B.H. Wear Behavior in Dry Sliding of Inconel 600 Alloy Using Taguchi Method and Regression Analysis Procedia Technology 23 383 390 2016 10.1016/j.protcy.2016.03.041
- Torres , A. , Luis , C.J. , and Puertas , I. Analysis of the Influence of EDM Parameters on Surface Finish, Material Removal Rate, and Electrode Wear of an INCONEL 600 Alloy The International Journal of Advanced Manufacturing Technology 80 1-4 123 140 2015 10.1007/s00170-015n-6974-9
- Torres , A. , Puertas , I. , and Luis , C.J. Spacing Roughness Parameters Analysis on the EDM of Inconel® 600 Alloys Procedia Manufacturing 13 573 578 2017 10.1016/j.promfg.2017.09.099
- Torres , A. , Puertas , I. , and Luis , C.J. EDM Machinability and Surface Roughness Analysis of INCONEL 600 Using Graphite Electrodes The International Journal of Advanced Manufacturing Technology 84 9-12 2671 2688 2016 10.1007/s00170-015-7880-x
- Bhosle , R.B. and Sharma , S.B. Multi-Performance Optimization of Micro-EDM Drilling Process of Inconel 600 Alloy Materials Today: Proceedings 4 2 1988 1997 2017 10.1016/j.matpr.2017.02.045
- Parida , A.K. and Maity , K. Comparison the Machinability of Inconel 718, Inconel 625 and Monel 400 in Hot Turning Operation Engineering Science and Technology, an International Journal 21 3 364 370 2018 10.1016/j.jestch.2018.03.018
- Bai , W. , Bisht , A. , Roy , A. , Suwas , S. et al. Improvements of Machinability of Aerospace-Grade Inconel Alloys with Ultrasonically Assisted Hybrid Machining The International Journal of Advanced Manufacturing Technology 101 5-8 1143 1156 2019 10.1007/s00170-018-3012-8
- Sørby , K. and Vagnorius , Z. High-Pressure Cooling in Turning of Inconel 625 with Ceramic Cutting Tools Procedia CIRP 77 74 77 2018 10.1016/j.procir.2018.08.221
- Kosaraju , S. , Kumar , M.V. , and Sateesh , N. Optimization of Machining Parameter in Turning Inconel 625 Materials Today: Proceedings 5 2 5343 5348 2018 10.1016/j.matpr.2017.12.119
- Ramanujam , R. , Venkatesan , K. , Saxena , V. , Pandey , R. et al. Optimization of Machining Parameters Using Fuzzy Based Principal Component Analysis during Dry Turning Operation of Inconel 625-a Hybrid Approach Procedia Engineering 97 668 676 2014 10.1016/j.proeng.2014.12.296
- Khan , S.A. , Soo , S.L. , Aspinwall , D.K. , Sage , C. et al. Tool Wear/Life Evaluation when Finish Turning Inconel 718 Using PCBN Tooling Procedia CIRP 1 283 288 2012 10.1016/j.procir.2012.04.051
- Montazeri , S. , Aramesh , M. , and Veldhuis , S.C. An Investigation of the Effect of a New Tool Treatment Technique on the Machinability of Inconel 718 during the Turning Process The International Journal of Advanced Manufacturing Technology 100 1-4 37 54 2019 10.1007/s00170-018-2669-3
- Grzesik , W. , Niesłony , P. , Habrat , W. , Sieniawski , J. , and Laskowski , P. Investigation of Tool Wear in the Turning of Inconel 718 Superalloy in Terms of Process Performance and Productivity Enhancement Tribology International 118 337 346 2018 10.1016/j.triboint.2017.10.005
- Rajkumar , G. , Balasundaram , R. , Ganesh , N. , and Rajaram , S. Investigation of Turning Parameters of Machining INCONEL 718 Using Titanium and Carbide Inserts Materials Today: Proceedings 5 5 11283 11294 2018 10.1016/j.matpr.2018.02.095
- Ezilarasan , C. and Velayudham , A. Effect of Machining Parameters on Surface Integrity in Machining Nimonic C-263 Super Alloy Using Whisker-Reinforced Ceramic Insert Journal of Materials Engineering and Performance 22 6 1619 1628 2013 10.1007/s11665-012-0439-1
- Ezilarasan , C. and Velayudham , A. An Experimental Analysis and Measurement of Process Performances in Machining of Nimonic C-263 Super Alloy Measurement 46 1 185 199 2013 10.1016/j.measurement.2012.06.006
- Fang , N. and Wu , Q. A Comparative Study of the Cutting Forces in High-Speed Machining of Ti-6Al-4V and Inconel 718 with a Round Cutting Edge Tool Journal of Materials Processing Technology 209 9 4385 4389 2009 10.1016/j.jmatprotec.2008.10.013
- Ezilarasan , C. and Senthil Kumar , V.S. Effect of Machining Parameters on Microhardness and Residual Stresses International Review of Mechanical Engineering 6 3 91 97 2012 10.1080/10426914.2014.984216
- Liao , Y.S. , Lin , H.M. , and Wang , J.H. Behaviors of End Milling Inconel 718 Superalloy by Cemented Carbide Tools Journal of Material Processing Technology 201 1-3 460 465 2008 10.1016/j.jmatprotec.2007.11.176
- Thakur , D.G. , Ramamoorthy , B. , and Vijayaraghavan , L. Study on the Machinability Characteristics of Superalloy Inconel 718 during High Speed Turning Materials and Design 30 1718 1725 2009 10.1016/j.matdes.2008.07.011
- Thakur , D.G. , Ramamoorthy , B. , and Vijayaraghavan , L. A Study on the Parameters in High-Speed Turning of Superalloy Inconel 718 Materials and Manufacturing Process 24 497 503 2009 10.1080/10426910802714571
- Thakur , D.G. , Ramamoorthy , B. , and Vijayaraghavan , L. Some Investigations on High-Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts Materials and Manufacturing Processes 27 10 1066 1072 2012 10.1080/10426914.2011.654158
- Thakur , D.G. , Ramamoorthy , B. , and Vijayaraghavan , L. Effect of Cutting Parameters on the Degree of Work Hardening and Tool Life during High-Speed Machining of Inconel 718 International Journal of Advanced Manufacturing Technology 59 483 489 2012 10.1007/s00170-011-3529-6
- Sugihara , T. and Enomoto , T. High Speed Machining of Inconel 718 Focusing on Tool Surface Topography of CBN Tool Procedia Manufacturing 1 675 682 2015 10.1016/j.promfg.2015.09.010
- Thakur , A. and Gangopadhyay , S. State-of-the-Art in Surface Integrity in Machining of Nickel-Based Superalloys International Journal of Machine Tools and Manufacture 100 25 54 2016 10.1016/j.ijmachtools.2015.10.001
- Thakur , A. , Mohanty , A. , and Gangopadhyay , S. Comparative Study of Surface Integrity Aspects of Incoloy 825 during Machining with Uncoated and CVD Multilayer Coated Inserts Applied Surface Science 320 29 837 2014 10.1016/j.apsusc.2014.09.129
- Thakur , A. , Gangopadhyay , S. , and Mohanty , A. Investigation on some Machinability Aspects of Inconel 825 during Dry Turning Materials and Manufacturing Process 30 8 1026 1034 2015 10.1080/10426914.2014.984216
- Thakur , A. and Gangopadhyay , S. Evaluation of Micro-Features of Chips of Inconel 825 during Dry Turning with Uncoated and Chemical Vapour Deposition Multilayer Coated Tools Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232 6 979 994 2018 10.1177/0954405416661584
- Xavior , M.A. , Manohar , M. , Jeyapandiarajan , P. , and Madhukar , P.M. Tool Wear Assessment during Machining of Inconel 718 Procedia Engineering 174 1000 1008 2017 10.1016/j.proeng.2017.01.252
- Sugihara , T. , Nishimoto , Y. , and Enomoto , T. Development of a Novel Cubic Boron Nitride Cutting Tool with a Textured Flank Face for High-Speed Machining of Inconel 718 Precision Engineering 48 75 82 2017 10.1016/j.precisioneng.2016.11.007
- Zhou , J. , Bushlya , V. , Peng , R.L. , Chen , Z. et al. Analysis of Subsurface Microstructure and Residual Stresses in Machined Inconel 718 with PCBN and Al2O3-SiCw Tools Procedia CIRP 13 150 155 2014 10.1016/j.procir.2014.04.026
- Pillai , J.U. , Sanghrajka , I. , Shunmugavel , M. , Muthuramalingam , T. et al. Optimisation of Multiple Response Characteristics on End Milling of Aluminium Alloy Using Taguchi-Grey Relational Approach Measurement 124 291 298 2018 10.1016/j.measurement.2018.04.052
- Thakur , D.G. , Ramamoorthy , B. , and Vijayaraghavan , L. Machinability Investigation of Inconel 718 in High-Speed Turning The International Journal of Advanced Manufacturing Technology 45 5-6 421 429 10.1007/s00170-009-1987-x
- Rakesh , M. and Datta , S. Effects of Cutting Speed on Chip Characteristics and Tool Wear Mechanisms during Dry Machining of Inconel 718 Using Uncoated WC Tool Arabian Journal for Science and Engineering 1 18 2019 10.1007/s13369-019-03785-y
- Derringer , G. and Suich , R. Simultaneous Optimization of Several Response Variables Journal of Quality Technology 12 4 214 219 1980 10.1080/00224065.1980.11980968