This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development and Influence of Setting Process Variables in Single Point Incremental Sheet Metal Forming of AA 8011 Using Complex Proportional Assessment and ANOVA
Technical Paper
2019-28-0064
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Single point Incremental forming (SPIF) is a metal forming process that has achieved impeccable quality since the early 1990s. ISF is a very limited twisting process in which an improved device that must be used after a particular direction travels on a metal sheet to form the desired shape. Process parameters such as axial feed (mm), feed (mm / min), tool diameter (mm) and depth (mm) at the interface between samples during SPIF greatly affect the quality of the cone. Maximum thinning (mm), cone height (mm), wall angle (mm), formation time (minutes), etc. The purpose of this study was to study these parameters by improving the cone mass formed by VMC. For a detailed study of these parameters, experiments were performed using the orthogonal array L9. Output parameters such as mechanical quality effects were analysed using COPRAS (Complex Proportional Assessment of alternatives) and ANOVA.
Authors
- Sundar Singh Sivam Sundarlingam Paramasivam - SRM Institute of Science and Technology
- Durai Kumaran - SRM Institute of Science and Technology
- Ganesh Babu Loganathan - Tishk International University
- Krishnaswamy Saravanan - SRM Institute of Science and Technology
- Raj Rajendran - SRM Institute of Science and Technology
- Harish Sriram - SRM Institute of Science and Technology
Topic
Citation
Sivam Sundarlingam Paramasivam, S., Kumaran, D., Loganathan, G., Saravanan, K. et al., "Development and Influence of Setting Process Variables in Single Point Incremental Sheet Metal Forming of AA 8011 Using Complex Proportional Assessment and ANOVA," SAE Technical Paper 2019-28-0064, 2019, https://doi.org/10.4271/2019-28-0064.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Unnamed Dataset 5 | ||
| Unnamed Dataset 6 | ||
| Unnamed Dataset 7 | ||
| Unnamed Dataset 8 | ||
| Unnamed Dataset 9 | ||
| Unnamed Dataset 10 | ||
| Unnamed Dataset 11 |
Also In
References
- Mishraa , R.S. and Mab , Z.Y. Friction Stir Welding and Processing Materials Science and Engineering R 50 1 78 2005
- Shigematsu , I. , Kwon , Y.J. , Suzuki , K. , Imai , T. , and Saito , N. Joining of 5083 and 6061 Aluminum Alloys by Friction Stir Welding Journal of Material Science Letters 22 5 353 356 2003
- Dawes , C.J. and Thomas , W.M. Friction Stir Process Welds Aluminium Alloys Welding Journal 75 3 41 45 1996
- Thomas , W.M. and Nicholas , E.D. Friction Stir Welding for the Transportation Industries Materials & Design 18 269 273 1997
- Sivam , S.P.S.S. , Loganathan , G.B. , Saravanan , K. et al. Experimental Study and Ignition Fire Risk Mapping on Friction Stir Welding Parameters of Dissimilar Alloys for the Benefits of Environment Materials Today: Proceedings 10.1016/j.matpr.2019.06.652
- Kumbhar , N.T. , Sahoo , S.K. , Samajdar , I. , Dey , G.K. , and Bhanumurthy , K. Microstructure and Micro Textural Studies of Friction Stir Welded Aluminium Alloy 5052 Materials and Design 32 1657 1666 2011
- Mahabunphachai , S. and Koc , M. Investigations on Forming of Aluminum 5052 and 6061 Sheet Alloys at Warm Temperatures Materials and Design 31 2422 2434 2010
- ASTM E8/E8M - 09 2009
- Sivam , S.P.S.S. , Umasekar , V.G. , Mishra , S. , Mishra , A. , and Mondal , A. Orbital Cold Forming Technology - Combining High Quality Forming with Cost Effectiveness - A Review Indian Journal of Science and Technology 9 38 October 2016 10.17485/ijst/2016/v9i38/91426
- Koilraj , M. , Sundareswaran , V. , Vijayan , S. , and Koteswara Rao , S.R. Friction Stir Welding of Dissimilar Aluminium Alloys AA2219 to AA5083 - Optimization of Process Parameters Using Taguchi Technique Materials and Design 42 1 7 2012
- Sato , Y. , Urata , M. , Kokawa , H. , and Ikeda , K. Hall-Petch Relationship in Friction Stir Welds of Equal Channel Angular-Pressed Aluminium Alloys Material Science and Engineering 354 1-2 298 305 2003
- Koilraj , M. , Sundareswaran , V. , Vijayan , S. , and Rao , S.R.K. Friction Stir Welding of Dissimilar Aluminum Alloys AA2219 to AA5083 - Optimization of Process Parameters Using Taguchi Technique Materials and Design 42 1 7 2012
- Xue , P. , Ni , D.R. , Wang , D. , Xiao , B.L. , and Ma , Z.Y. Effect of Friction Stir Welding Parameters on the Microstructure and Mechanical Properties of the Dissimilar Al-Cu Joints 528 4683 4689 2011
- Padmanaban , G. and Balasubramanian , V. Selection of FSW Tool Pin Profile, Shoulder Diameter and Material for Joining AZ31B Magnesium Alloy - An Experimental Approach Materials and Design 30 7 2647 2656 2009
- Kwon , Y.J. , Shigematsu , I. , and Saito , N. Dissimilar Friction Stir Welding between Magnesium and Aluminum Alloys 62 3827 3829 2008
- Logothetis , N. Managing for Total Quality from Deming to Taguchi and SPC Englewood Cliffs, NJ Prentice Hall 1992
- Chien , C.-H. , Lin , W.-B. , and Chen , T. Optimal FSW Process Parameters for Aluminum Alloys AA5083 Journal of the Chinese Institute of Engineers 34 1 99 105 2011 10.1080/02533839.2011.553024
- Sivam , S.P.S.S. et al. Multi Response Optimization of Setting Input Variables for Getting Better Product Quality in Machining of Magnesium AM60 by Grey Relation Analysis and ANOVA Periodica Polytechnica Mechanical Engineering 2017 10.3311/PPme.11034
- Sivam , S.P.S.S. , Gopal , M. , Venkatasamy , S. , and Singh , S. An Experimental Investigation and Optimisation of Ecological Machining Parameters on Aluminium 6063 in its Annealed and Unannealed Form Journal of Chemical and Pharmaceutical Sciences 46 53 2015
- Sivam , S.P.S.S. , Gopal M. , Venkatasamy S. , and Singh , S. Application of Forming Limit Diagram and Yield Surface Diagram to Study Anisotropic Mechanical Properties of Annealed and Unannealed SPRC 440E Steels Journal of Chemical and Pharmaceutical Sciences 15 22 2015 0974-2115
- Sivam , S.P.S.S. , Lakshman , Abburi Kumar , K. , Moorthy , Sathiya and Rajendrakumar Investigation Exploration Outcome of Heat Treatment on Corrosion Resistance of AA 5083 in Marine Application Journal of Science and Technology 14 S2 453 460 2016 0972-768X
- Sivam , S.P.S.S. , Umasekar , V.G. , Mishra , A. , Mishra , S. , and Mondal , A. Orbital Cold Forming Technology - Combining High Quality Forming with Cost Effectiveness - A Review Indian Journal of Science and Technology 9 38 2016 10.17485/ijst/2016/v9i38/91426
- Sivam , S.P.S.S. , Uma Sekar , V.G. , Saravanan , K. , Rajendra Kumar , S. et al. Frequently Used Anisotropic Yield Criteria for Sheet Metal Applications: A Review Indian Journal of Science and Technology 9 47 2016b 10.17485/ijst/2015/v8i1/92107
- Sivam , S.P.S.S. , Bhat , M.D.J. , Natarajan , S. , and Chauhan , N. Analysis of Residual Stresses, Thermal Stresses, Cutting Forces and Other Output Responses of Face Milling Operation on ze41 Magnesium Alloy International Journal of Modern Manufacturing Technologies X 1 92 100 2018 2067-3604
- Sivam , S.P.S.S. , Saravanan , K. , Pradeep , N. , Moorthy , K. , and Rajendrakumar , S. The Grey Relational Analysis and Anova to Determine the Optimum Process Parameters for Friction Stir Welding of Ti and mg Alloys Periodica Polytechnica Mechanical Engineering 10.3311/PPme.12117
- Sivam , S.P.S.S. , Saravanan , K. , Pradeep , N. , Rajendra Kumar , S. , and Karuppiah , S. Comparison of Manufacturing Data Analysis for 5 & 3-Axis Vertical Machining Center for the Time and Tool Benefits of Industries International Journal of Engineering & Technology 7 4.5 196 201 2018 10.14419/ijet.v7i4.5.20044
- Sivam , S.P.S.S. , Saravanan , K. , Pradeep , N. , Rajendra Kumar , S. et al. Development of Vibrator Feeding Mechanism Using Two Sets of Rollers for the Separation of Ball Grading for Industry Benefits International Journal of Engineering & Technology 7 4.5 202 206 2018 10.14419/ijet.v7i4.5.20045
- Sivam , S.P.S.S. , Rajendra Kumar , S. , Karuppiah , S. , and Rajasekaran , A. Competitive Study of Engineering Change Process Management in Manufacturing Industry Using Product Life Cycle Management - A Case Study 2017 International Conference on Inventive Computing and Informatics (ICICI) Coimbatore 2017 76 81 10.1109/ICICI.2017.8365247
- Zavadskas , E.K. , Kaklauskas , A. , and Vilutiene , T. Multicriteria Evaluation of Apartment Blocks Maintenance Contractors: Lithuanian Case Study International Journal of Strategic Property Management 13 4 319 338 2009
- Chatterjee , P. and Chakraborty , S. Gear Material Selection Using Complex Proportional Assessment and Additive Ratio Assessment-Based Approaches: A Comparative Study International Journal of Materials Science and Engineering 1 2 104 111 2013
- Zavadskas , E.K. , Kaklauskas , A. , Turskis , Z. , and Tamosaitiene , J. Multi-Attribute Decision-Making Model by Applying Grey Numbers Inform. 20 305 320 2009
- Podvezko , V. The Comparative Analysis of MCDA Methods SAW and COPRAS Engg. Econ. 22 134 146 2011
- Saaty , T.L. The Analytic Hierarchy Process, Planning, Priority Setting, Resource Allocation New York McGraw-Hill 1980
- Velasquez , M. and Hester , P.T. An Analysis of Multi-Criteria Decision Making Methods Int. J. Oper. Res. 10 56 66 2013
- Ginevicius , R. , Podvezko , V. The Influence of Complex Evaluation Methods on Rating the Alternative Solutions of Wall Insulation Proc. 9th Int. Conf. Modern. Build. Mater. Struc. Tech. Vilnius, Lithuani 2007
- Lotfi , F.H. and Fallahnejad , R. Imprecise Shannon’s Entropy and Multi Attribute Decision Making Entropy 12 53 62 2010
- Hung , C.-C. and Chen , L.-H. A Multiple Criteria Group Decision Making Model with Entropy Weight in an Intuitionistic Fuzzy Environment Lect. Note. Elect. Engg 52 17 26 2010
- Lee , M.-C. , Chang , J.-F. , and Chen , J.-F. An Entropy Decision Model for Selection of Enterprise Resource Planning System Int. J. Comput. Trends Techno. 1 1 9 2011
- Shemshadi , A. , Shirazi , H. , Toreihi , M. , and Tarokh , M.J. A Fuzzy VIKOR Method for Supplier Selection Based on Entropy Measure for Objective Weighting Expert. Sys. Appl. 38 12160 12167 2011
- Sivam , S.P.S.S. , Loganathan , G.B. , Umasekar , V.G. , Suresh Kumar , P.S. , and Raja , S. Study on Micro Structural Characteristics and Mechanical Behaviour of AISI1050 Steel under Various Heat Treatments Int. J. Vehicle Structures & Systems 11 1 15 20 2019 10.4273/ijvss.11.1.04
- Sivam , S.P.S.S. , Loganathan , G.B. , Saravanan , K. , Umasekar , V.G. , and Rameez , T.P.M. Optimization of Passenger Car Door Impact Beam Using Quasi Static CAE Analysis Int. J. Vehicle Structures & Systems 11 1 21 26 2019 10.4273/ijvss.11.1.05
- Sivam , S.P.S.S. , Saravanan , K. , Loganathan , G.B. , Kumaran , D. , and Rajendrakumar , S. Root Cause Analysis for Failure of Door Lock Case Assembly during Caulking Process Int. J. Vehicle Structures & Systems 11 1 11 14 2019 10.4273/ijvss.11.1.03
- Sivam , S.P.S.S. , Loganathan , G.B. , Saravanan , K. , Umasekar , V.G. , and Rajendrakumar , S. Numerical Evaluation and Influence of Product Quality and its Defects Measures on the Drawing of Stainless Steel Cross Member for Automobiles Int. J. Vehicle Structures & Systems 11 1 107 112 2019 10.4273/ijvss.11.1.19
- Sivam , S.P.S.S. , Umasekar , V.G. , Loganathan , G.B. , Kumaran , D. , and Rajendrakumar , S. Multi Response Optimization of Setting Process Variables in Face Milling of ZE41 Magnesium Alloy Using Ranking Algorithms and ANOVA Int. J. Vehicle Structures & Systems 11 1 47 56 2019 10.4273/ijvss.11.1.10