This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Potential of Electrification Applied to Non-Road Diesel Engines
Technical Paper
2019-24-0202
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The new Stage 5 European regulation for Non Road Mobile Machinery has lowered the limits on pollutant emissions for all the categories of internal combustion engines. An interesting alternative to the implementation of sophisticated after-treatment systems is to downsize the engine, and provide the extra power for peak demands with an electric motor, installed in place of the flywheel.
The paper explores the potential of this concept, applied to an industrial engine, manufactured by Kohler, and delivering a maximum power of 56 kW@2600 rpm. The study is supported by a comprehensive experimental characterization of the internal combustion engine and of the electric components. A representative duty cycle is also defined, on the basis of a set of measures, taken in real operating conditions. The analysis of this reference cycle is performed by using a GT-Suite model, comparing different power split strategies. It is found that the ICE total displacement can be reduced from 2.5 to 1.9 L (from 4 to 3 cylinders), without any penalization on powertrain performance and weight. A relevant reduction of soot (22%) and NOx (16%) emissions is observed, along with a slight reduction of fuel consumption.
Recommended Content
Authors
Topic
Citation
Mattarelli, E., Rinaldini, C., Scrignoli, F., Fregni, P. et al., "Potential of Electrification Applied to Non-Road Diesel Engines," SAE Technical Paper 2019-24-0202, 2019, https://doi.org/10.4271/2019-24-0202.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 |
Also In
References
- International Council for Clean Transportation EU-Stage-V_policy update ICCT nov2016.pdf https://www.theicct.org/sites/default/files/publications
- Moreda , G.P. , Muñoz-García , M.A. , and Barreiro , P.J.E.C. High Voltage Electrification of Tractor and Agricultural Machinery - A Review Energy Conversion and Management 115 117 131 2016
- Lajunen , A. , Suomela , J. , Pippuri , J. , Tammi , K. et al. Electric and Hybrid Electric Non-Road Mobile Machinery - Present Situation and Future Trends World Electric Vehicle Journal 8 1 172 183 2016
- Ehsani , M. , Gao , Y. , and Emadi , A. Modern Electric, Hybrid Electric, and Fuel Cell Vehicles CRC Press, Taylor & Francis Group 978-1-4200-5398-2
- Liu , W. Hybrid Electric Vehicle System Modeling and Control Second New York John Wiley & Sons 2017
- Hayes , J.G. and Goodarzi , G.A. Electric Powertrain: Energy Systems, Power Electronics and Drives for Hybrid, Electric and Fuel Cell Vehicles New York John Wiley & Sons 2017
- MI , C. , Masrur , M.A. , and Gao , D.W. Hybrid Electric Vehicles: Principles and Applications with Practical Perspectives New York John Wiley & Sons 2017
- Koot , M. , Kessels , J.T.B.A. , de Jager , B. , Heemels , W.P.M.H. , van den Bosch , P.P.J. and Steinbuch , M. Energy Management Strategies for Vehicular Electric Power Systems IEEE Trans. on Vehicle Technol. 54 3 771 782 May 2005
- Baumann , B.M. , Washington , G. , Glenn , B.C. , and Rizzoni , G. Mechatronic Design and Control of Hybrid Electric Vehicles IEEE/ASME Trans. Mechatronics 5 1 58 72 Mar. 2000
- Arsie , I. , Graziosi , M. , Pianese , C. , Rizzo , G. , and Sorrentino , M. Optimization of Supervisory Control Strategy for Parallel Hybrid Vehicle with Provisional Load Estimate Proc. of the 7th Int. Symp. on Advanced Vehicle Control (AVEC) Arnhem, The Netherlands Aug. 2004
- Kessels , J.T.B.A. , Koot , M.W.T. , Hendrix , W. , Ellenbroek , R. , Heemels , M. , Pesgens , M. , Steinbuch , M. and van den Bosch P. Vehicle Modeling for Energy Management Strategies Proc. of the 7th Int. Symp. on Advanced Vehicle Control (AVEC) 2004 465 470
- Arsie , I. , Pianese , C. , Rizzo , G. , Flora , R. , and Serra , G. A Computer Code for S.I. Engine Control and Powertrain Simulation SAE Technical Paper 2000-01-0938 2000 10.4271/2000-01-0938