This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Validation of Diesel Combustion Models with Turbulence Chemistry Interaction and Detailed Kinetics
Technical Paper
2019-24-0088
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Detailed and fast combustion models are necessary to support design of Diesel engines with low emission and fuel consumption. Over the years, the importance of turbulence chemistry interaction to correctly describe the diffusion flame structure was demonstrated by a detailed assessment with optical data from constant-volume vessel experiments. The main objective of this work is to carry out an extensive validation of two different combustion models which are suitable for the simulation of Diesel engine combustion. The first one is the Representative Interactive Flamelet model (RIF) employing direct chemistry integration. A single flamelet formulation is generally used to reduce the computational time but this aspect limits the capability to reproduce the flame stabilization process. To overcome such limitation, a second model called tabulated flamelet progress variable (TFPV) is tested in this work. Simulations in a heavy-duty engine are carried out for a large number of operating points and a detailed comparison between computed and experimental data is performed in terms of cylinder pressure, heat release rate and pollutant emissions.
Recommended Content
Authors
Citation
Zhou, Q., Lucchini, T., D'Errico, G., and Hardy, G., "Validation of Diesel Combustion Models with Turbulence Chemistry Interaction and Detailed Kinetics," SAE Technical Paper 2019-24-0088, 2019, https://doi.org/10.4271/2019-24-0088.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 |
Also In
References
- D'Errico , G. , Lucchini , T. , Hardy , G. , Tap , F. et al. Combustion Modeling in Heavy Duty Diesel Engines Using Detailed Chemistry and Turbulence-Chemistry Interaction SAE Technical Paper 2015-01-0375 2015 10.4271/2015-01-0375
- Ferrarese , A. , Dias , M. , Bruno , R. A. , Rejowski , E. et al. PCU Solutions to Heavy Duty Diesel Engines after Proconve P7 SAE Technical Paper 2012-36-0358 2012 10.4271/2012-36-0358
- Hashimoto , M. , Aoyagi , Y. , Kobayashi , M. , Murayama , T. et al. BSFC Improvement and NOx Reduction by Sequential Turbo System in a Heavy Duty Diesel Engine SAE Technical Paper 2012-01-0712 2012 10.4271/2012-01-0712
- D'Errico , G. Comparison of Well-Mixed and Multiple Representative Interactive Flamelet Approaches for Diesel Spray Combustion Modelling Combustion Theory & Modelling 18 1 65 88 2014 10.1080/13647830.2013.860238
- Pei , Y. , Hawkes , E. R. , and Kook , S. Transported Probability Density Function Modelling of the Vapour Phase of an N-Heptane Jet at Diesel Engine Conditions Proceedings of the Combustion Institute 34 2 3039 3047 2013 10.1016/j.proci.2012.07.033
- Barths , H. , Hasse , C. , and Peters , N. Computational Fluid Dynamics Modelling of Non-Premixed Combustion in Direct Injection Diesel Engines International Journal of Engine Research 1 3 249 267 2000 10.1243/1468087001545164
- Kong , S.-C. , Han , Z. , and Reitz , R. D. The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulation SAE transactions 502 518 1995 http://www.jstor.org/stable/44633235
- Colin , O. and Benkenida , A. The 3-Zones Extended Coherent Flame Model (ECFM3Z) for Computing Premixed/Diffusion Combustion Oil & Gas Science and Technology 59 6 593 609 2004 10.2516/ogst:2004043
- Haworth , D. Progress in Probability Density Function Methods for Turbulent Reacting Flows Progress in Energy and combustion Science 36 2 168 259 2010 10.1016/j.pecs.2009.09.003
- Bhattacharjee , S. and Haworth , D. C. Simulations of Transient N-Heptane and N-Dodecane Spray Flames under Engine-Relevant Conditions Using a Transported PDF Method Combustion and Flame 160 10 2083 2102 2013 10.1016/j.combustflame.2013.05.003
- Pei , Y. , Hawkes , E. R. , and Kook , S. A Comprehensive Study of Effects of Mixing and Chemical Kinetic Models on Predictions of N-Heptane Jet Ignitions with the PDF Method Flow, Turbulence and Combustion 91 2 249 280 2013 10.1007/s10494-013-9454-z
- Lehtiniemi , H. , Zhang , Y. , Rawat , R. , and Mauss , F. Efficient 3-D CFD Combustion Modeling with Transient Flamelet Models SAE Technical Paper 2008-01-0957 2008 10.4271/2008-01-0957
- Naud , B. , Novella , R. , Pastor , J. M. , and Winklinger , J. F. RANS Modelling of a Lifted H2/N2 Flame Using an Unsteady Flamelet Progress Variable Approach with Presumed PDF Combustion and Flame 162 4 893 906 2015 10.1016/j.combustflame.2014.09.014
- Michel , J.-B. , Colin , O. , Angelberger , C. , and Veynante , D. Using the Tabulated Diffusion Flamelet Model ADF-PCM to Simulate a Lifted Methane-Air Jet Flame Combustion and Flame 156 7 1318 1331 2009 10.1016/j.combustflame.2008.12.012
- Lucchini , T. D. Errico , G. Cerri , T. Onorati , A. et al. Experimental Validation of Combustion Models for Diesel Engines Based on Tabulated Kinetics in a Wide Range of Operating Conditions SAE Technical Paper 2017-24-0029 2017 10.4271/2017-24-0029
- Weller , H. G. , Tabor , G. , Jasak , H. , and Fureby , C. A Tensorial Approach to Computational Continuum Mechanics Using Object-Oriented Techniques Computers in Physics 12 6 620 631 1998 10.1063/1.168744
- Peters , N. Laminar Flamelet Concepts in Turbulent Combustion Symposium (International) on Combustion 21 1231 1250 1988 10.1016/S0082-0784(88)80355-2
- Pitsch , H. , Barths , H. , and Peters , N. Three-Dimensional Modeling of NOx and Soot Formation in DI-Diesel Engines Using Detailed Chemistry Based on the Interactive Flamelet Approach SAE Technical Paper 962057 1996 10.4271/962057
- Peters , N. Laminar Diffusion Flamelet Models in Non-Premixed Turbulent Combustion Progress in Energy and Combustion Science 10 3 319 339 1984
- Hasse , C. W. A Two-Dimensional Flamelet Model for Multiple Injections in Diesel Engines Cuvillier Verlag 2004
- Singh , S. , Reitz , R. D. , and Musculus , M. P. Comparison of the Characteristic Time (CTC), Representative Interactive Flamelet (RIF), and Direct Integration with Detailed Chemistry Combustion Models against Optical Diagnostic Data for Multi-Mode Combustion in a Heavy-Duty DI Diesel Engine SAE Technical Paper 2006-01-0055 2006 10.4271/2006-01-0055
- Felsch , C. , Gauding , M. , Vanegas , A. , Won , H. et al. Evaluation of Modeling Approaches for NOx Formation in a Common-Rail DI Diesel Engine within the Framework of Representative Interactive Flamelets (RIF) SAE Technical Paper 2008-01-0971 2008 10.4271/2008-01-0971
- Lucchini , T. D. , Errico , G. , Onorati , A. , Frassoldati , A. et al. Modeling Non-Premixed Combustion Using Tabulated Kinetics and Different Fame Structure Assumptions SAE International Journal of Engines 10 2 593 607 2017 10.4271/2017-01-0556
- Ferziger , J. H. and Peric , M. Computational Methods for Fluid Dynamics Springer Science & Business Media 2012
- Reitz , R. D. and Diwakar , R. Effect of Drop Breakup on Fuel Sprays SAE Transactions 218 227 1986 https://www.jstor.org/stable/44725372
- Reitz , R. D. and Diwakar , R. Structure of High-Pressure Fuel Sprays SAE Transactions 492 509 1987 https://www.jstor.org/stable/44718226
- Baumgarten , C. Mixture Formation in Internal Combustion Engines Springer Science & Business Media 2006
- Lucchini , T. , D’Errico , G. , and Ettorre , D. Numerical Investigation of the Spray-Mesh-Turbulence Interactions for High-Pressure, Evaporating Sprays at Engine Conditions International Journal of Heat and Fluid Flow 32 1 285 297 2011 10.1016/j.ijheatfluidflow.2010.07.006
- Yao , T. , Pei , Y. , Zhong , B.-J. , Som , S. et al. A Compact Skeletal Mechanism for N-Dodecane with Optimized Semi-Global Low-Temperature Chemistry for Diesel Engine Simulations Fuel 191 339 349 2017 10.1016/j.fuel.2016.11.083
- Lucchini , T. , Della Torre , A. D. , Errico , G. , Montenegro , G. et al. Automatic Mesh Generation for CFD Simulations of Direct-Injection Engines SAE Technical Paper 2015-01-0376 2015 10.4271/2015-01-0376