This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Advanced Model Experiment for the Research of Journal Bearings with Cavitation
Technical Paper
2019-01-2331
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The prediction of cavitation in journal bearings is one of the current challenges in the field of fluid dynamics. Hydrodynamic journal bearings are used in a wide range of industrial applications because they provide low friction and minimal wear. Suction cavitation is one potential cause of bearing failures. The work on hand presents a new experimental approach to study suction cavitation in a scaled bearing model. Moreover, mechanical and fluid dynamic similarity laws are described which enable the transfer of bearing operation conditions into the laboratory experiment.
Recommended Content
Technical Paper | Estimation of the Mechanism to Suppress Water Degradation of 1K Heat-Curing Epoxy Adhesive with High Durability |
Technical Paper | Revolutionizing Shipboard Maintenance |
Technical Paper | An Internal Line-Contact EHL and Traction Test Rig |
Authors
Citation
Reinke, P., Schmidt, M., and Beckmann, T., "Advanced Model Experiment for the Research of Journal Bearings with Cavitation," SAE Technical Paper 2019-01-2331, 2019, https://doi.org/10.4271/2019-01-2331.Also In
References
- H. Gläser: Schäden an Gleit-und Wälzlagerungen Verlag Technik GmbH Berlin 1990
- M. J. Braun , W. M. Hannon: Cavitation formation and modeling for fluid film bearings - A review Journal of Engineering Tribology 224 838 863 2010
- DIN ISO 7146-1 Erscheinungsbild und Charakterisierung von Schäden an ölgeschmierten metallischen Gleitlagern Deutsches Institut für Normung e. V. Beuth Verlag 2008
- D. R. Garner , R. D. James , J. F. Warriner: Cavitation erosion damage in engine bearings-Theory and Practice J. of Engineering for Power 102 847 857 1980
- U. Engel: Schäden an Gleitlagern in Kolbenmaschinen - in W. Bartz (Hrsg.): Schäden an geschmierten Maschinenelementen Zweite Expert-Verlag 1992
- M. J. Braun , M. Dzodzo: Three-Dimensional Flow and Pressure Patterns in a Hydrostatic Journal Bearing Pocket Journal of Tribology 119 4 711 719 1997
- M. Schmidt: Untersuchung der dreidimensionalen Strömung in Radialgleitlagern 2016
- M. Nobis: Experimentelle Untersuchung der Spaltströmung in einem Modell eines Kurbelwellenhauptlagers 978-3-8440-5706-5 2017
- L. Bobach: Simulation dynamisch belasteter Radialgleitlager unter Mischreibungsbedingungen shaker Verlag Aachen 2008
- B. Jakobsson , L. Floberg: The infinite journal bearing considering vaporization Trans. of Chalmers University of Techn 190 1957
- L. Floberg: The infinite journal bearing considering vaporization Trans. of Chalmers University of Techn 189 1957
- K. O. Olsson: Cavitation in dynamically loaded bearings Trans. of Chalmers University of Techn. 308 1965
- H. G. Elrod: A cavitation algorithm Journal of Lubrication Techn. 103 350 354 1981
- P. Reinke (né Stuecke), M. Nobis , M. Schmidt, 2009 3D-CFD Flow Structures in Journal Bearings SAE technical paper 2009-01-2688
- P. Reinke, M. Schmidt: Lokale, hochauflösende 3D-CFD-Simulation der Schmierspaltströmung in einem instationär belasteten Radialgleitlager Abschlussbericht Vorhaben Nr. 1154 1073 2014
- J. Affenzeller , H. Gläser: Lagerung und Schmierung von Verbrennungsmotoren Springer Wien, New York 1996 3-211-82577-0
- G . Graf , K. Kollmann: Grundlegende Untersuchungen eines tragfähigen Schmierfilms zwischen reibungsbehafteten gleitenden Flächen bei statischer und dynamischer Belastung Abschlussbericht Vorhaben Nr. 36 51 1964
- P. M. Eagles , J. T. Stuart , R. C. DiPrima: The effects of eccentricity on torque and load in Taylorvortex flow Journal of Fluid Mechanics 87 209 231 1978
- R. C. DiPrima: A Note on the stability of flow in loaded journal bearings ASLETransactions 6 3 249 253 1963
- C. D. Andereck , S.S. Liu , H. L. Swinney: Flow regimes in a circular Couette system with independently rotating cylinders Journal of Fluid Mechanics 164 155 183 1986
- M. M. Kuhr , P. F. Pelz: Rotorkräfte infolge Spaltströmungen in Fluidenergiemaschinen Kolloquium Fluidenergiemaschinen Wien 2018
- R. W. Fox , A. T. McDonald , P. J. Pritchard: Fluid Mechanics John Wiley & Sons 6th 2004
- F. Peters , S. Kunde: Experiment zur Quetschströmung zwischen zwei Platten im Submillimeterbereich German Association for Laser Anemometry GALA e.V. Karlsruhe, Germany 46-1 46-6 978-3-9816764-2-6
- P. Reinke , M. Schmidt , T. Beckmann: The Cavitating Taylor-Couette Flow Physics of Fluids 30 10 10.1063/1.5049743 2018
- M. Nobis , P. Reinke , M. Schmidt: Gas bubble formation and velocity measurements inside the narrow gap flow of a journal bearing model International Conference on Experimental Fluid Mechanics München 10.18726/2018_2 2018
- Schmidt , M ; P. Reinke ; T. Beckmann: Numerical simulation of suction cavitation in hydrodynamic journal bearings 90th Annual Meeting, February 18-22, 2019 - International Association of Applied Mathematics and Mechanics GAMM e.V., selected for publication in PAMM 2019
- M. Wollfarth: Experimentelle Untersuchungen der Kavitationserosion im Gleitlager 1995