This content is not included in your SAE MOBILUS subscription, or you are not logged in.
New Method for Decoupling the Powertrain Roll Mode to Improve Idle Vibration
ISSN: 0148-7191, e-ISSN: 2688-3627
Published June 5, 2019 by SAE International in United States
This content contains downloadable datasetsAnnotation ability available
Modern engines have high torque outputs and have low RPM due to increased demand for fuel efficiency. Vibrations caused by such engines have to be mitigated. Decoupling the roll mode from the remaining five rigid body modes results in a response which is predominantly about the torque roll axis (TRA) and helps reduce vibrations. Therefore, placing the mounts on the TRA early in the design phase is crucial. Best NVH performance can be obtained by optimizing the powertrain mount parameters viz; Position, Orientation and Stiffness. Many times, packaging restricts the mounts to be placed about the TRA resulting in degradation in NVH performance. Assuming that the line through the engine mount (Body side) centers is the desired TRA, we propose a novel method of shifting the TRA by adding mass modifying the powertrain inertia such that the new TRA is parallel to and on top to the desired TRA. This in turn will decouple the roll mode and reduce vibrations. This problem is formulated as an optimization problem. The numerical examples presented in this paper will demonstrate that the proposed scheme of modifying the TRA improves NVH performance.
CitationHaider, S., Abbas, A., and Sturla, F., "New Method for Decoupling the Powertrain Roll Mode to Improve Idle Vibration," SAE Technical Paper 2019-01-1588, 2019, https://doi.org/10.4271/2019-01-1588.
Data Sets - Support Documents
|[Unnamed Dataset 1]|
|[Unnamed Dataset 2]|
|[Unnamed Dataset 3]|
|[Unnamed Dataset 4]|
|[Unnamed Dataset 5]|
|[Unnamed Dataset 6]|
|[Unnamed Dataset 7]|
|[Unnamed Dataset 8]|
|[Unnamed Dataset 9]|
|[Unnamed Dataset 10]|
|[Unnamed Dataset 11]|
|[Unnamed Dataset 12]|
|[Unnamed Dataset 13]|
|[Unnamed Dataset 14]|
|[Unnamed Dataset 15]|
|[Unnamed Dataset 16]|
|[Unnamed Dataset 17]|
- Ambardekar, M., Logeshkumar, N., and Gangurde, P. , “Vibration Isolation of a Pick-Up Vehicle with a 2-Cylinder Diesel Engine,” SAE Technical Paper 2007-26-035, 2007, doi:10.4271/2007-26-035.
- Koizumi, T., Tsujiuchi, N., and Yoshida, T. , “Simulation of Engine Vibration during Idling for Optimization of Mounting,” in Proceeding of ISMA 2004, 2004.
- Jeong, T. and Singh, R. , “Analytical Methods of Decoupling the Automotive Engine Torque Roll Axis,” Journal of Sound and Vibration 234(1):85-114, 2000.
- Singh, R. and Hu, J.-F. , “Improved Torque Roll Axis Decoupling Axiom for a Powertrain Mounting System in the Presence of a Compliant Base,” Journal of Sound and vibration 331:1498-1518, 2012.
- Singh, R. and Park, J.-Y. , “Effect of Non-Proportional Damping on the Torque Roll Axis Decoupling of an Engine Mounting System,” Journal of Sound and Vibration 313:841-857, 2008.
- Donders, S., Toso, A., Roesems, D., and Erdelyi, E.H. , “Powertrain Mounting System Layout for Decoupling Rigid-Body Modes in the Vehicle Concept Design Stage,” SAE Technical Paper 2013-01-1706, 2013, doi:10.4271/2013-01-1706.
- Akanda, A. and Adulla, C. , “Application of Evolutionary Computation in Automotive Powertrain Mount Tuning,” Shock and Vibration 13:85-102, 2006.
- Yunhe, Y., Naganathan, N.G., and Dukkipati, R.V. , “A Literature Review of Automotive Engine Mounting Systems,” Mechanism and Machine Theory 36:123-142, 2001.
- Sui, J., Hoppe, C., and Hirshey, J. , “Powertrain Mounting Design Principles to Achieve Optimum Vibration Isolation with Demonstration Tools,” SAE Technical Paper 2003-01-1476, 2003, doi:10.4271/2003-01-1476.
- Suh, M.W., Shim, M.B., and Kim, M.S. , “Multidisciplinary Design Optimization of Engine Mounts with Consideration of the Driveline,” Journal of Automobile Engineering 217(2):107-114, 2003.
- Liu, C. , “A Computerized Optimization Method of Engine Mounting System,” SAE Technical Paper 2003-01-1461, 2003, doi:10.4271/2003-01-1461.
- Allen, D.P., Taunton, D.J., and Allen, R. , “A Study of Shock Impacts and Vibration Dose Values Onboard High Speed Marine Craft,” Institute of Sound and Vibrations Research, University of Southampton, UK, 2008.
- Kumar, V., Saran, V.H., and Gurguntla, V. , “Study of Vibration Dose Value and Discomfort Due to Whole Body Vibration Exposure for a Two Wheeler Drive,” in Proceedings of the 1st International and 16th National Conference on Machines and Mechanisms (iNaCoMM2013), IIT Roorkee, India, Dec 18-20, 2013.