This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modeling of Engine Aftertreatment System Cooling for Hybrid Vehicles
Technical Paper
2019-01-0989
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Exhaust aftertreatment systems are essential components in modern powertrains, needed to reach the low legislated levels of NOx and soot emissions. A well designed diesel engine exhaust aftertreatment system can have NOx conversion rates above 95%. However, to achieve high conversion the aftertreatment system must be warm. Because of this, large parts of the total NOx emissions come from cold starts where the engine has been turned off long enough for the aftertreatment system to cool down and loose its capacity to reduce NOx. It is therefore important to understand how the aftertreatment cools down when the engine in turned off.
Experimental data for a catalyst cool-down process is presented and analyzed. The analysis shows that it is important to capture the spatial distribution of temperatures both in axial and radial directions. The data and analysis are used to design a catalyst thermal model that can be used for model based catalyst temperature monitoring and control.
Recommended Content
Authors
Topic
Citation
Holmer, O., Blomgren, F., and Eriksson, L., "Modeling of Engine Aftertreatment System Cooling for Hybrid Vehicles," SAE Technical Paper 2019-01-0989, 2019, https://doi.org/10.4271/2019-01-0989.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 |
Also In
References
- Fontaras , G. , Pistikopoulos , P. , and Samaras , Z. Experimental Evaluation of Hybrid Vehicle Fuel Economy and Pollutant Emissions over Real-World Simulation Driving Cycles Atmospheric environment 42 18 4023 4035 2008
- Holmer , O. and Eriksson , L. Simultaneous Reduction of Fuel Consumption and Nox Emissions through Hybridization of a Long Haulage Truck IFAC-PapersOnLine 50 1 8927 8932 2017
- Wang , Q. , Tu , F. , Ma , J. , Xu , H. et al. Urea-Scr Catalyst Research and Exhaust Pipe Layout Optimization Electric Information and Control Engineering (ICEICE) 2011 International Conference on 2011 2830 2834
- Paul , D. Automobiles and Pollution Warrendale, PA SAE Inc. 1995
- Eijnden , E. , Cloudt , R. , Willems , F. , and Heijden , P. Automated Model Fit Tool for Scr Control and Obd Development SAE Technical Paper 2009-01-1285 2009 10.4271/2009-01-1285
- Winkler , C. , Flörchinger , P. , Patil , M.D. , Gieshoff , J. et al. Modeling of Scr Denox Catalyst-Looking at the Impact of Substrate Attributes SAE Technical Paper 2003-01-0845 2003 10.4271/2003-01-0845
- Chen , P. and Wang , J. Control-Oriented Modeling and Observer-Based Estimation of Solid and Gas Temperatures for a Diesel Engine Aftertreatment System ASME - Journal of Dynamic Systems, Measurement, and Control 134 6 2012 10.1115/1.4006632 http://dx.doi.org/10.1115/1.4006632
- Chen , P. and Wang , J. Control-Oriented Model for Integrated Diesel Engine and Aftertreatment Systems Thermal Management Control Engineering Practice 22 81 93 2014 10.1016/j.conengprac.2013.09.009
- Chi , J.N. and Dacosta , H.F.M. Modeling and Control of a Urea-Scr Aftertreatment System Reprinted from: Diesel Exhaust Emission Control Modeling SAE Transactions 114 4 449 464 2005
- Guzzella , L. and Onder , C.H. Introduction to Modeling and Control of Internal Combustion Engine Systems Second Springer Verlag 2009
- Meda , L. , Shu , Y. , and Romzek , M. Heavy Duty Diesel after-Treatment System Analysis Based Design: Fluid, Thermal and Structural Considerations SAE Technical Paper 2009-01-0624 2009 10.4271/2009-01-0624
- Koltsakis , G.C. , Samaras , Z. , Karvountzis-Kontakiotis , A. , Zacharopoulou , T. et al. Implications of Engine Start-Stop on after-Treatment Operation SAE International Journal of Engines 4 1 1571 1585 2011
- Holmer , O. and Eriksson , L. A Mean Value Model for Unsteady Gas Flows and Heat Transfer in Pipes Proceedings of the 59th Conference on Simulation and Modelling (SIMS 59) Oslo, Norway 2018 Sep. 26-28, 2018 138 Linköping University Electronic Press
- Eriksson , L. Mean Value Models for Exhaust System Temperatures SAE Technical Paper 2002-01-0374 2002 10.4271/2002-01-0374
- Holman , J.P. Heat Transfer Nineth 2002
- Kays , W.M. Convective Heat and Mass Transfer Tata McGraw-Hill Education 2012
- Grossmann , C. , Roos , H.-G. , and Stynes , M. Numerical Treatment of Partial Differential Equations 154 Springer 2007
- Holmer , O. and Eriksson , L. Modelling and Validation of Hybrid Heavy Duty Vehicles with Exhaust Aftertreatment Systems Proceedings of the 58th Conference on Simulation and Modelling (SIMS 58) Reykjavik, Iceland September 25-27, 2017 2017 138 304 316 Linköping University Electronic Press
- Kailath , T. Linear Systems 156 Englewood Cliffs, NJ Prentice-Hall 1980
- Glad , T. and Ljung , L. Control Theory CRC Press 2014