This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Modeling of Close-Coupled SCR Concepts to Meet Future Cold Start Requirements for Heavy-Duty Engines
ISSN: 0148-7191, e-ISSN: 2688-3627
Published April 02, 2019 by SAE International in United States
This content contains downloadable datasetsAnnotation ability available
The low-NOx standard for heavy-duty trucks proposed by the California Air Resources Board will require rapid warm-up of the aftertreatment system (ATS). Several different aftertreatment architectures and technologies, all based on selective catalytic reduction (SCR), are being considered to meet this need. One of these architectures, the close-coupled SCR (ccSCR), was evaluated in this study using two different physics-based, 1D models; the simulations focused on the first 300 seconds of the cold-start Federal Test Procedure (FTP). The first model, describing a real, EuroVI-compliant engine equipped with series turbochargers, was used to evaluate a ccSCR located either i) immediately downstream of the low-pressure turbine, ii) in between the two turbines, or iii) in a by-pass around the high pressure turbine. These simulations indicate that the location downstream of the low-pressure turbine offers nearly the best NOx conversion, and that the optimal volume of the ccSCR in this location is 25% of a conventional SCR catalyst. The second model describes a conventional heavy-duty aftertreatment system, to which a ccSCR was added. This model was used to examine the performance of the ccSCR in the context of the full ATS. Optimization of the diesel oxidation catalyst (DOC) and SCR catalyst designs in this system was considered, as well as the use of an NH3 storage-based control strategy for DEF dosing to the SCR catalysts.
CitationHarris, T., Mc Pherson, K., Rezaei, R., Kovacs, D. et al., "Modeling of Close-Coupled SCR Concepts to Meet Future Cold Start Requirements for Heavy-Duty Engines," SAE Technical Paper 2019-01-0984, 2019, https://doi.org/10.4271/2019-01-0984.
Data Sets - Support Documents
|Unnamed Dataset 1|
|Unnamed Dataset 2|
|Unnamed Dataset 3|
- Sharp , C. , Webb , C. , Neely , G. , Carter , M. et al. Achieving Ultra Low NOx Emissions Levels with a 2017 Heavy-Duty On-Highway TC Diesel Engine and an Advanced Technology Emissions System - Thermal Management Strategies SAE Int. J. Engines 10 4 1697 1712 2017 10.4271/2017-01-0954
- Harris , T. and Gardner , T. Modeling of Aftertreatment Technologies to Meet a Future HD Low-NOx Standard SAE Technical Paper 2019-01-0043 2019 10.4271/2019-01-0043
- Hallstrom , K. , Voss , K.E. , BASF Corp. Close-Coupled SCR System Options and Designs for Meeting Future Ultra-Low NOx Emission Limits the 2018 SAE Congress
- Rauch , H. , Rezaei , R. , Weber , M. , Kovacs , D. et al Holistic Development of Future Low NOx Emission Concepts for Heavy-Duty Applications SAE Technical Paper 2018-01-1700 2018 10.4271/2018-01-1700
- Kovacs , D. , Rauch , H. , Rezaei , R. , Huang , Y. et al Modeling Heavy-Duty Engine Thermal Management Technologies to Meet Future Cold Start Requirements
- Pant , A. et al. Kinetic Model of NOx SCR Using Urea on Commercial Cu-Zeolite Catalyst Ind. Eng. Chem. Res. 50 5490 5498 2011
- Sampara , C. et al. Global Kinetic for a Commercial Diesel Oxidation Catalyst with Two Exhaust Hydrocarbons Ind. Eng. Chem. Res. 47 311 322 2008
- Hirose , S. , Miyairi , Y. , Katsube , F. , Yuuki , K. et al. Newly Developed Cordierite Honeycomb Substrate for SCR Coating Realizing System Compactness and Low Backpressure SAE Technical Paper 2012-01-1079 2012