This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Utilizing Static Autoignition Measurements to Estimate Intake Air Condition Requirements for Compression Ignition in a Multi-Mode Engine - Application of Chemical Kinetic Modeling
Technical Paper
2019-01-0955
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
A multi-mode operation strategy, wherein an engine operates compression ignited at low load and spark-ignited at high load, is an attractive way to achieve better part-load efficiency in light duty, spark-ignition (SI) engines, while maintaining robust operation and control across the operating map. Given the sensitivity of compression ignition operation to in-cylinder conditions, one of the critical requirements in realizing such a strategy in practice is accurate control of intake charge conditions - pressure, temperature, as well as fuel loading, to achieve stable combustion and enable rapid mode-switches. A reliable way of characterizing fuels under such operating schemes is key. Towards this, this paper presents the second of a two-part study, comparing the reactivity trends for five, high octane gasolines in a modern SI engine operated in an advanced compression ignition mode to the behavior measured under similar thermodynamic conditions, but in the static environment of a rapid compression machine. In this work, a detailed chemical kinetic model is utilized with multi-component surrogates representing the full boiling-range gasolines to evaluate predicted autoignition behavior under the same scenario. While Shah et al. [1] demonstrated that the overall trends were found to be similar between the two experimental devices, when compared appropriately, this study finds that the model lacks adequate fidelity to properly distinguish chemical kinetic interactions between various fuel constituents. Important combustion metrics, including combustion timing and rates of heat release, are skewed. Additional work appears necessary in order to confidently apply kinetic models for multi-mode engine design / control, and fuel co-optimization.
Recommended Content
Authors
Citation
Kang, D., Shah, A., Rockstroh, T., and Goldsborough, S., "Utilizing Static Autoignition Measurements to Estimate Intake Air Condition Requirements for Compression Ignition in a Multi-Mode Engine - Application of Chemical Kinetic Modeling," SAE Technical Paper 2019-01-0955, 2019, https://doi.org/10.4271/2019-01-0955.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
Unnamed Dataset 7 |
Also In
References
- Shah , A. , Kang , D. , Goldsborough , S.S. , and Rockstroh , T. Utilizing Static Autoignition Measurements to Estimate Intake Air Condition Requirements for Compression Ignition in a Multi-Mode Engine - Engine and RCM experimental study SAE Technical Paper 2019-01-0957 2019 10.4271/2019-01-0957
- Ciatti , S. , Johnson , M. , Adhikary , B.D. , Reitz , R.D. et al. Efficiency and Emissions Performance of Multizone Stratified Compression Ignition Using Different Octane Fuels SAE Technical Paper 2013-01-0263 2013 10.4271/2013-01-0263
- Cung , K. , Rockstroh , T. , Ciatti , S. , Cannella , W. , and Goldsborough , S.S. Parametric Study of Ignition and Combustion Characteristics from a Gasoline Compression Ignition Engine Using Two Different Reactivity Fuels ASME 2016 Intern. Combust. Engine Fall Tech. Conf 2016 V001T03A011 V001T03A011 10.1115/ICEF20169395
- Sellnau , M. , Moore , W. , Sinnamon , J. , Hoyer , K. et al. GDCI Multi-Cylinder Engine for High Fuel Efficiency and Low Emissions SAE Int. J. Engines 8 2 775 790 2015
- Kalghatgi , G.T. The Outlook for Fuels for Internal Combustion Engines Int. J. Engine Res. 15 4 383 398 2014 10.1177/1468087414526189
- Chang , J. , Viollet , Y. , Amer , A. , and Kalghatgi , G. Fuel Economy Potential of Partially Premixed Compression Ignition (PPCI) Combustion with Naphtha Fuel SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting 2013 10.4271/2013-01-2701
- Risberg , P. , Kalghatgi , G. , and Ångstrom , H.-E. Auto-Ignition Quality of Gasoline-Like Fuels in HCCI Engines SAE Technical Paper 2003-01-3215 2003 10.4271/2003-01-3215
- Manente , V. , Johansson , B. , and Cannella , W. Gasoline Partially Premixed Combustion, the Future of Internal Combustion Engines? Int. J. Engine Res. 12 3 194 208 2011 10.1177/1468087411402441
- Sellnau , M. , Foster , M. , Moore , W. , Sinnamon , J. et al. Second Generation GDCI Multi-Cylinder Engine for High Fuel Efficiency and US Tier 3 Emissions SAE Int. J. Engines 9 2 2016 10.4271/2016-01-0760
- Kalghatgi , G.T. , Hildingsson , L. , Harrison , A.J. , and Johansson , B. Autoignition Quality of Gasoline Fuels in Partially Premixed Combustion in Diesel Engines Proc. Combust. Inst. 33 2 3015 3021 2011 10.1016/j.proci.2010.07.007
- Manente , V. , Johansson , B. , and Cannella , W. Gasoline Partially Premixed Combustion, the Future of Internal Combustion Engines? Int. J. Engine Res. 12 3 194 208 2011 10.1177/1468087411402441
- Kodavasal , J. , Kolodziej , C.P. , Ciatti , S.A. , and Som , S. Effects of Injection Parameters, Boost, and Swirl Ratio on Gasoline Compression Ignition Operation at Idle and Low-Load Conditions Int. J. Engine Res. 18 8 824 836 2017 10.1177/1468087416675709
- Kolodziej , C.P. , Ciatti , S. , Vuilleumier , D. , Das Adhikary , B. , and Reitz , R.D. Extension of the Lower Load Limit of Gasoline Compression Ignition with 87 AKI Gasoline by Injection Timing and Pressure SAE 2014 World Congress & Exhibition 2014 10.4271/2014-01-1302
- Sellnau , M. , Hoyer , K. , Moore , W. , Foster , M. , Sinnamon , J. , and Klemm , W. Advancement of GDCI Engine Technology for US 2025 CAFE and Tier 3 Emissions WCX World Congress Experience 2018 10.4271/2018-01-0901
- Yang , Y. , Dec , J. , Dronniou , N. , Sjöberg , M. , and Cannella , W. Partial Fuel Stratification to Control HCCI Heat Release Rates: Fuel Composition and Other Factors Affecting Pre-Ignition Reactions of Two-Stage Ignition Fuels SAE Int. J. Engines 4 1 1903 1920 2011
- Tao , M. , Han , D. , and Zhao , P. An Alternative Approach to Accommodate Detailed Ignition Chemistry in Combustion Simulation Combust. Flame 176 400 408 2017 10.1016/j.combustflame.2016.11.009
- Rockstroh , T. , Fridlyand , A. , Cung , K. , Ciatti , S. , Cannella , W.J. , and Goldsborough , S.S. Autoignition Behavior of a Full Boiling Range Gasoline: Observations in RCM and GCI Engine Environments Combust. Flame 2018
- Yates , A.D.B. , Swarts , A. , and Viljoen , C.L. Correlating Auto-Ignition Delays and Knock-Limited Spark-Advance Data for Different Types of Fuel 2005 SAE Brasil Fuels & Lubricants Meeting 2005 10.4271/2005-01-2083
- Yates , A. , Bell , A. , and Swarts , A. Insights Relating to the Autoignition Characteristics of Alcohol Fuels Fuel 89 1 83 93 2010 10.1016/j.fuel.2009.06.037
- Splitter , D.A. , Gilliam , A. , Szybist , J. , and Ghandhi , J. Effects of Pre-Spark Heat Release on Engine Knock Limit Proc. Combust. Inst. 2018 10.1016/j.proci.2018.05.145
- Szybist , J.P. and Splitter , D.A. Pressure and Temperature Effects on Fuels with Varying Octane Sensitivity at High Load in SI Engines Combust. Flame 177 49 66 2017 10.1016/j.combustflame.2016.12.002
- Livengood , J.C. and Wu , P.C. Correlation of Autoignition Phenomena in Internal Combustion Engines and Rapid Compression Machines Symp. Int. Combust. 5 1 347 356 1955 10.1016/S0082-0784(55)80047-1
- Yates , A.D.B. and Viljoen , C.L. An Improved Empirical Model for Describing Auto-Ignition 2008 SAE International Powertrains, Fuels and Lubricants Congress 2008 10.4271/2008-01-1629
- Weisser , G. , Tanner , F.X. , and Boulouchos , K. Modeling of Ignition and Early Flame Development with Respect to Large Diesel Engine Simulation International Fuels & Lubricants Meeting & Exposition 1998 10.4271/981451
- Pan , J. , Zhao , P. , Law , C.K. , and Wei , H. A predictive Livengood-Wu Correlation for Two-Stage Ignition Int. J. Engine Res. 17 8 825 835 2016 10.1177/1468087415619516
- Khaled , F. , Badra , J. , and Farooq , A. Ignition Delay Time Correlation of Fuel Blends Based on Livengood-Wu Description Fuel 209 July 776 786 2017 10.1016/j.fuel.2017.07.095
- Tao , M. , Zhao , P. , and Lynch , P. 2018 1 8
- Tao , M. , Wu , T. , Ge , H. , DelVescovo , D. , and Zhao , P. A Kinetic Modeling Study on Octane Rating and Fuel Sensitivity in Advanced Compression Ignition Engines Combust. Flame 185 234 244 2017 10.1016/j.combustflame.2017.07.020
- Szybist , J.P. , Wagnon , S.W. , Splitter , D. , Pitz , W.J. , and Mehl , M. The Reduced Effectiveness of EGR to Mitigate Knock at High Loads in Boosted SI Engines SAE Int. J. Engines 10 5 2305 2318 2017 10.4271/2017-24-0061
- Dronniou , N. and Dec , J.E. Investigating the Development of Thermal Stratification from the Near-Wall Regions to the Bulk-Gas in an HCCI Engine with Planar Imaging Thermometry SAE Int. J. Engines 5 3 2012 10.4271/2012-01-1111
- Werblinski , T. , Fendt , P. , Zigan , L. , and Will , S. High-Speed Combustion Diagnostics in a Rapid Compression Machine by Broadband Supercontinuum Absorption Spectroscopy Appl. Opt. 56 15 4443 2017 10.1364/AO.56.004443
- Bürkle , S. , Biondo , L. , Ding , C.-P. , Honza , R. et al. In-Cylinder Temperature Measurements in a Motored IC Engine Using TDLAS Flow Turbul. Combust. 101 1 139 159 2018 10.1007/s10494-017-9886-y
- Truedsson , I. , Tuner , M. , Johansson , B. , and Cannella , W. Pressure Sensitivity of HCCI Auto-Ignition Temperature for Oxygenated Reference Fuels J. Eng. Gas Turbines Power 135 7 072801 2013 10.1115/1.4023614
- Sjöberg , M. and Dec , J.E. An Investigation of the Relationship between Measured Intake Temperature, BDC Temperature, and Combustion Phasing for Premixed and DI HCCI Engines SAE Technical Paper 2004-01-1900 2004 10.4271/2004-01-1900
- Masurier , J.-B. , Waqas , M. , Sarathy , M. , and Johansson , B. Autoignition of Isooctane Beyond RON and MON Conditions SAE Int. J. Fuels Lubr. 11 4 459 468 2018 10.4271/2018-01-1254
- Petitpas , G. , McNenly , M.J. , and Whitesides , R.A. A Framework for Quantifying Measurement Uncertainties and Uncertainty Propagation in HCCI/LTGC Engine Experiments SAE Int. J. Engines 10 3 2017 10.4271/2017-01-0736
- Petitpas , G. , Whitesides , R. , Dernotte , J. , and Dec , J. Refining Measurement Uncertainties in HCCI/LTGC Engine Experiments SAE Technical Paper 2018-01-1248 2018 10.4271/2018-01-1248
- Talei , M. and Hawkes , E.R. Ignition in Compositionally and Thermally Stratified n-Heptane/Air Mixtures: A Direct Numerical Simulation Study Proc. Combust. Inst. 35 3 3027 3035 2015 10.1016/j.proci.2014.09.006
- Luong , M.B. , Yu , G.H. , Lu , T. , Chung , S.H. , and Yoo , C.S. Direct Numerical Simulations of Ignition of a Lean n-Heptane/Air Mixture with Temperature and Composition Inhomogeneities Relevant to HCCI and SCCI Combustion Combust. Flame 162 12 4566 4585 2015 10.1016/j.combustflame.2015.09.015
- Luong , M.B. , Sankaran , R. , Yu , G.H. , Chung , S.H. , and Yoo , C.S. On the Effect of Injection Timing on the Ignition of Lean PRF/Air/EGR Mixtures under Direct Dual Fuel Stratification Conditions Combust. Flame 183 309 321 2017 10.1016/j.combustflame.2017.05.023
- Goldsborough , S.S. , Hochgreb , S. , Vanhove , G. , Wooldridge , M.S. et al. Advances in Rapid Compression Machine Studies of Low- and Intermediate-Temperature Autoignition Phenomena Prog. Energy Combust. Sci. 63 1 78 2017 10.1016/j.pecs.2017.05.002
- Sung , C.-J. and Curran , H.J. Using Rapid Compression Machines for Chemical Kinetics Studies Prog. Energy Combust. Sci. 44 1 18 2014 10.1016/j.pecs.2014.04.001
- Weber , B.W. , Sung , C. , and Renfro , M.W. On the Uncertainty of Temperature Estimation in a Rapid Compression Machine Combust. Flame 162 6 2518 2528 2015 10.1016/j.combustflame.2015.03.001
- Bourgeois , N. , Jeanmart , H. , Winckelmans , G. , Lamberts , O. , and Contino , F. How to Ensure the Interpretability of Experimental Data in Rapid Compression Machines? A Method to Validate Piston Crevice Designs Combust. Flame 198 393 411 2018 10.1016/j.combustflame.2018.09.030
- Fridlyand , A. , Johnson , M.S. , Goldsborough , S.S. , West , R.H. et al. The Role of Correlations in Uncertainty Quantification of Transportation Relevant Fuel Models Combust. Flame 180 239 249 2017 10.1016/j.combustflame.2016.10.014
- Kalghatgi , G. , Risberg , P. , and Angstrom , H.-E. A Method of Defining Ignition Quality of Fuels in HCCI Engines SAE Int 1 2003 10.1017/CBO9781107415324.004
- Kalghatgi , G. , Head , R. , Chang , J. , Viollet , Y. , and Babiker , H. An Alternative Method Based on Toluene/n-Heptane Surrogate Fuels for Rating the Anti-Knock Quality of Practical Gasolines 2015 10.4271/2014-01-2609
- Truedsson , I. and Cannella , W. Development of New Test Method for Evaluating HCCI Fuel Performance SAE Technical Paper 2014-01-2667 2014 10.4271/2014-01-2667
- Shibata , G. and Urushihara , T. Auto-Ignition Characteristics of Hydrocarbons and Development of HCCI Fuel Index SAE World Congress & Exhibition 2007 10.4271/2007-01-0220
- Hwang , W. , Dec , J. , and Sjöberg , M. Spectroscopic and Chemical-Kinetic Analysis of the Phases of HCCI Autoignition and Combustion for Single- and Two-Stage Ignition Fuels Combust. Flame 154 3 387 409 2008 10.1016/j.combustflame.2008.03.019
- Sjöberg , M. and Dec , J.E. 2007 10.4271/2007-01-0051
- Mehl , M. , Pitz , W.J. , Sjöberg , M. , and Dec , J.E. Detailed Kinetic Modeling of Low-Temperature Heat Release for PRF Fuels in an HCCI Engine SAE Technical Paper 2009-01-1806 2009 10.4271/2009-01-1806
- Kolodziej , C.P. , Pamminger , M. , Sevik , J. , Wallner , T. et al. Effects of Fuel Laminar Flame Speed Compared to Engine Tumble Ratio, Ignition Energy, and Injection Strategy on Lean and EGR Dilute Spark Ignition Combustion SAE Int. J. Fuels Lubr. 10 1 2017 10.4271/2017-01-0671
- Wallner , T. , Sevik , J.M. , Scarcelli , R. , Kaul , B.C. et al. Effects of Ignition and Injection Perturbation under Lean and Dilute GDI Engine Operation SAE Technical Paper 2015-01-1871 2015 10.4271/2015-01-1871
- Pamminger , M. , Sevik , J. , Scarcelli , R. , Wallner , T. et al. Evaluation of Knock Behavior for Natural Gas - Gasoline Blends in a Light Duty Spark Ignited Engine SAE Int. J. Engines 9 4 2016 10.4271/2016-01-2293
- Fridlyand , A. , Goldsborough , S.S. , Al Rashidi , M. , Sarathy , S.M. et al. Low Temperature Autoignition Study of Substituted 5-Membered Ring Naphthenes Combust. Flame 2018 10.1016/j.combustflame.2018.10.028
- Bourgeois , N. , Goldsborough , S.S. , Jeanmart , H. , and Contino , F. CFD Simulations of Rapid Compression Machines Using Detailed Chemistry: Evaluation of the ‘Crevice Containment’ Concept Combust. Flame 189 225 239 2018 10.1016/j.combustflame.2017.10.033
- Goldsborough , S.S. , Santner , J. , Kang , D. , Fridlyand , A. et al. Heat Release Analysis for Rapid Compression Machines: Challenges and Opportunities Proc. Combust. Inst. 2018 10.1016/j.proci.2018.05.128
- Sarathy , S.M. , Tingas , E.-A. , Nasir , E.F. , Detogni , A. et al. Three-Stage Heat Release in n-Heptane Auto-Ignition Proc. Combust. Inst. 2018 10.1016/j.proci.2018.07.075
- Heywood , J.B. Internal Combustion Engine Fundamentals New York McGraw-Hill 1988 978-0-07-028637-5
- Ebrahimi , R. Effect of Specific Heat Ratio on Heat Release Analysis in a Spark Ignition Engine Sci. Iran. 18 6 1231 1236 2011 10.1016/j.scient.2011.11.002
- McCormick , R.L. , Fouts , L.A. , Fioroni , G.M. , Christensen , E.D. , Ratcliff , M.A. , Zigler , B.T. , Sluder , S. , Szybist , J.P. , Ciatti , S. , Bays , J.T. , Pitz , W. , Mehl , M. , Dec , J.E. , and Miles , P.C. 2018 10.2172/1467176
- Mehl , M. , Wagnon , S. , Tsang , K. , Kukkadapu , G. et al. A Comprehensive Detailed Kinetic Mechanism for the Simulation of Transportation Fuels Livermore Research Org.: Lawrence Livermore National Lab. (LLNL) 2017
- Li , Y. , Zhou , C.-W. , Somers , K.P. , Zhang , K. , and Curran , H.J. The Oxidation of 2-Butene: A High Pressure Ignition Delay, Kinetic Modeling Study and Reactivity Comparison with Isobutene and 1-Butene Proc. Combust. Inst. 36 1 403 411 2017 10.1016/j.proci.2016.05.052
- Zhang , K. , Banyon , C. , Bugler , J. , Curran , H.J. et al. An Updated Experimental and Kinetic Modeling Study of n-Heptane Oxidation Combust. Flame 172 116 135 2016 10.1016/j.combustflame.2016.06.028
- Zhang , K. , Banyon , C. , Burke , U. , Kukkadapu , G. et al. An Experimental and Kinetic Modeling Study on the Oxidation of Four Hexane Isomers: New Reaction Rate Rules Proc. Combust. Inst. 37 2019
- Kukkadapu , G. , Kang , D. , Wagnon , S.W. , Zhang , K. et al. Kinetic Modeling Study of Surrogate Components for Gasoline, Jet and Diesel Fuels: C7-C11 Methylated Aromatics Proc. Combust. Inst. 2018 10.1016/j.proci.2018.08.016
- Al Rashidi , M.J. , Mármol , J.C. , Banyon , C. , Sajid , M.B. et al. Cyclopentane Combustion. Part II. Ignition Delay Measurements and Mechanism Validation Combust. Flame 183 Supplement C 372 385 2017 10.1016/j.combustflame.2017.05.017
- McNenly , M.J. , Whitesides , R.A. , and Flowers , D.L. Faster Solvers for Large Kinetic Mechanisms Using Adaptive Preconditioners Proc. Combust. Inst. 35 1 581 587 2015 10.1016/j.proci.2014.05.113
- Yaws , C.L. The Yaws Handbook of Vapor Pressure: Antoine Coefficients Elsevier Science 2015 978-0-12-803002-8
- Masurier , J.-B. , Altoaimi , O. , Mohammed , A. , Waqas , M. , and Johansson , B. Combustion Behavior of n-Heptane, Isooctane, Toluene and Blends under HCCI Conditions in the Pressure-Temperature Diagram International Powertrains, Fuels & Lubricants Meeting 2018 10.4271/2018-01-1684
- Maccormac , M. and Townend , D.T.A. 47. The Spontaneous Ignition under Pressure of Typical Knocking and Non-Knocking Fuels: Heptane, Octane; Isooctane, Diisopropyl Ether, Acetone, Benzene J. Chem. Soc. Resumed 0 0 238 246 1938 10.1039/JR9380000238
- Goldsborough , S.S. A Chemical Kinetically Based Ignition Delay Correlation for Iso-Octane Covering a Wide Range of Conditions Including the NTC Region Combust. Flame 156 6 1248 1262 2009 10.1016/j.combustflame.2009.01.018
- Sjöberg , M. and Zeng , W. Combined Effects of Fuel and Dilution Type on Efficiency Gains of Lean Well-Mixed DISI Engine Operation with Enhanced Ignition and Intake Heating for Enabling Mixed-Mode Combustion SAE Int. J. Engines 9 2 750 767 2016 10.4271/2016-01-0689
- Goldsborough , S.S. , Mittal , G. , and Banyon , C. Methodology to Account for Multi-Stage Ignition Phenomena during Simulations of RCM Experiments Proc. Combust. Inst. 34 1 685 693 2013 10.1016/j.proci.2012.05.094
- Mittal , G. , Chaos , M. , Sung , C.-J. , and Dryer , F.L. Dimethyl Ether Autoignition in a Rapid Compression Machine: Experiments and Chemical Kinetic Modeling Fuel Process. Technol. 89 12 1244 1254 2008 10.1016/j.fuproc.2008.05.021