This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Thermodynamic Design, Analysis and Test of Cummins’ Supertruck 2 50% Brake Thermal Efficiency Engine System
Technical Paper
2019-01-0247
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Current production heavy duty diesel engines have a brake thermal efficiency (BTE) between 43-46% [1]. In partnership with the United States Department of Energy (DOE) as part of the Supertruck 2 program, Cummins has undertaken a research program to develop a new heavy-duty diesel engine designed to deliver greater than 50% BTE without the use of waste heat recovery. A system level optimization focused on: increased compression ratio, higher injection rate, carefully matched highly efficient turbocharging, variable lube oil pump, variable cooling components, and low restriction after treatment designed to deliver 50% BTE at a target development point. This work will also illustrate the system level planning and understanding of interactions required to allow that same 50% BTE heavy duty diesel engine to be integrated with a waste heat recovery (WHR) system to deliver system level efficiency of 55% BTE at a single point. In addition to a test bench demonstration, the described system is also planned to be demonstrated at a vehicle system level. This paper summarizes the process and results of the 50% BTE engine development effort with a focus on efficiency and performance.
Recommended Content
Technical Paper | Size Distribution of Diesel Soot in the Lubricating Oil |
Technical Paper | A Modern HD-Diesel Engine with Rapeseed Oil, DPF and SCR |
Authors
Citation
Mohr, D., Shipp, T., and Lu, X., "The Thermodynamic Design, Analysis and Test of Cummins’ Supertruck 2 50% Brake Thermal Efficiency Engine System," SAE Technical Paper 2019-01-0247, 2019, https://doi.org/10.4271/2019-01-0247.Also In
References
- Stanton , D.W. Systematic Development of Highly Efficient and Clean Engines to Meet Future Commercial Vehicle Greenhouse Gas Regulations SAE Int. J. Engines 6 3 1395 1480 2013 10.4271/2013-01-2421
- Khan , S. The Future of Heavy-Duty Vehicle Fuel Efficiency 9th Integer Emissions Summit & DEF Forum Oct. 26, 2016 Chicago, IL
- Abani , N. , Chiang , M. , Thomas , I. , Nagar , N. et al. Developing a 55+ BTE Commercial Heavy-Duty Opposed-Piston Engine Without a Waste Heat Recovery System Heavy-Duty-, On-und Off-Highway-Motoren 2016 Wiesbaden Springer Vieweg 2017 292 310
- Ruth , M. Vehicle Technologies Office Merit Review 2018: Cummins-Peterbilt SuperTruck II 2018 DOE Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about Advanced Combustion Systems Jun. 2018 www.energy.gov/sites/prod/files/2018/06/f52/acs102_ruth_2018_o.pdf
- Johnson , T. and Joshi , A. Review of Vehicle Engine Efficiency and Emissions SAE Technical Paper 2017-01-0907 2017 10.4271/2017-01-0907
- Wood , E. , Duran , A. , Burton , E. , Gonder , J. et al. 2015
- Dickson , J. , Ellis , M. , Rousseau , T. , and Jeff , S. Validation and Design of Heavy Vehicle Cooling System with Waste Heat Recovery Condenser SAE Int. J. Commer. Veh 7 2 458 467 2014 10.4271/2014-01-2339
- Heywood , J.B. 1988
- Vojtech , R. Advanced Combustion for Improved Thermal Efficiency in an Advanced On-Road Heavy Duty Diesel Engine SAE Technical Paper 2018-01-0237 2018 10.4271/2018-01-0237