This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Comparison of Conventional Intake Port and Swirl Intake Port on Mixture Formation in a GDI Engine - A CFD Analysis
Technical Paper
2019-01-0010
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Gasoline direct injection (GDI) engines have picked up prominence in the current circumstances in light of lower fuel consumption and exhaust emissions. Mixture formation in these engines plays a critical role which affects the combustion, performance and emission characteristics. To get better mixture formation, various factors ought to be considered, of which intake port design is one of the factors of considerable importance. Therefore, in this study, a comparison of mixture formation, performance and emission characteristics has been analyzed in a GDI engine with conventional intake port and swirl intake port. The analysis is carried out on a four-stroke wall-guided GDI engine using the computational fluid dynamics (CFD) with the help of the CONVERGE. The validation of spray breakup model is carried out to the extent possible using the experimental results available in the literature. The analysis is carried out at four overall equivalence ratios at an engine speed of 2000 rpm., and a fuel injection pressure of 100 bar using a six-hole injector. From the results, it is found that better mixture stratification, higher indicated mean effective pressure (IMEP), and lower emissions are obtained for a GDI engine with the conventional intake ports at overall equivalence ratios (ER) of 0.5 and 0.6, whereas they are better in the engine with swirl intake ports at the overall ERs of 0.7 and 0.8.
Recommended Content
Authors
Citation
Karaya, Y., Addepalli, S., and Mallikarjuna, J., "Comparison of Conventional Intake Port and Swirl Intake Port on Mixture Formation in a GDI Engine - A CFD Analysis," SAE Technical Paper 2019-01-0010, 2019, https://doi.org/10.4271/2019-01-0010.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 |
Also In
References
- Takagi , Y. , Itoh , T. , Muranaka , S. , Iiyama , A. et al. Simultaneous Attainment of Low Fuel Consumption High Output Power and Low Exhaust Emissions in Direct Injection SI Engines SAE Technical Paper 980149 1998 10.4271/980149
- Zhao , F. , Lai , M.-C. , and Harrington , D.L. Automotive Spark-Ignited Direct-Injection Gasoline Engines Progress in Energy and Combustion Science 25 5 437 562 1999 10.1016/S0360-1285(99)00004-0
- Krishna , A.S. , Mallikarjuna , J.M. , and Kumar , D. Effect of Engine Parameters on In-Cylinder Flows in a Two-Stroke Gasoline Direct Injection Engine Applied Energy 176 282 294 2016 10.1016/j.apenergy.2016.05.067
- Changming , H. and Sichuan , X. The Investigation and Application of Variable Tumble Intake System on a GDI Engine SAE Int. J. Engines 7 4 2022 2034 2014 10.4271/2014-01-2885
- Sutar , P. , Dsouza , A. , Sonawane , S.B. , Rairikar , S.D. et al. Study of In-Cylinder Tumble Effect on Spark Ignition Direct Injection (SI-DI) Engine Performance Using Gasoline, CNG, and E85 SAE Technical Paper 2017-26-0076 2017 10.4271/2017-26-0076
- Costa , M. , Sorge , U. , Merola , S. , Irimescu , A. et al. Split Injection in a Homogeneous Stratified Gasoline Direct Injection Engine for High Combustion Efficiency and Low Pollutants Emission Energy 117 405 415 2016 10.1016/j.energy.2016.03.065
- Saw , O.P. , Karaya , Y. , and Mallikarjuna , J.M. Effect of Fuel Injection Pressure on Mixture Stratification in a GDI Engine - A CFD Analysis SAE Technical Paper 2017-01-2317 2017 10.4271/2017-01-2317
- Costa , M. , Sorge , U. , and Allocca , L. Numerical Study of the Mixture Formation Process in a Four-Stroke GDI Engine for Two-Wheel Applications Simulation Modelling Practice and Theory 19 4 1212 1226 2011 10.1016/j.simpat.2010.07.006
- Costa , M. , Marchitto , L. , Merola , S.S. , and Sorge , U. Study of Mixture Formation and Early Flame Development in a Research GDI (Gasoline Direct Injection) Engine through Numerical Simulation and UV-Digital Imaging Energy 77 88 96 2014 10.1016/j.energy.2014.04.114
- Addepalli , S.K. and Mallikarjuna , J.M. Parametric Analysis of a 4-Stroke GDI Engine Using CFD Alexandria Engineering Journal 57 1 23 34 2018 10.1016/ j.aej. 2016.10.007
- Addepalli , S.K. , Saw , O.P. , and Mallikarjuna , J.M. Effect of Mixture Distribution on Combustion and Emission Characteristics in a GDI Engine - A CFD Analysis SAE Technical Paper 2017-24-0036 2017 10.4271/2017-24-0036
- Addepalli , S.K. and Mallikarjuna , J.M. Quantitative Parametrization of Mixture Distribution in GDI Engines: A CFD Analysis Archives of Computational Methods in Engineering 1 24 2018 10.1007/s11831-018-9262-7
- Addepalli , K.S. and Mallikarjuna , J.M. Effect of Engine Parameters on Mixture Stratification in a Wall-Guided GDI Engine - A Quantitative CFD Analysis SAE Int. J. Commer. Veh. 10 2 562 571 2017 10.4271/2017-01-0570
- Jadhav , P.D. and Mallikarjuna , J.M. Effect of EGR on Performance and Emission Characteristics of a GDI Engine - A CFD Study SAE Technical Paper 2017-24-0033 2017 10.4271/2017-24-0033
- 2015
- Costa , M. , Sorge , U. , and Allocca , L. CFD Optimization for GDI Spray Model Tuning and Enhancement of Engine Performance Advances in Engineering Software 49 43 53 2012 10.1016/j.advengsoft.2012.03.004
- Karaya , Y. , Addepalli , S.K. , and Mallikarjuna , J.M. Effect of Fuel Injector Location and Nozzle-Hole Orientation on Mixture Formation in a GDI Engine: A CFD Analysis SAE Technical Paper 2018-01-0201 2018 10.4271/2018-01-0201
- Krishna , A.S. , Mallikarjuna , J.M. , Davinder , K. , and Babu , Y.R. In-Cylinder Flow Analysis in a Two-Stroke Engine - A Comparison of Different Turbulence Models Using CFD SAE Technical Paper 2013-01-1085 2013 10.4271/2013-01-1085
- Versteeg , H.K. and Malalasekera , W. An Introduction to Computational Fluid Dynamics Longman Scientific and Technical Publication 1995 11 25
- Krishna , A.S. and Mallikarjuna , J.M. Optimization of Fuel Injection Timing in a GDI Engine to Reduce Emissions - A CFD Analysis International Conference on Development of Smart Cities Interface, Governance and Technology September 9-10, 2016
- Givler , S.D. , Raju , M. , Pomraning , E. , Senecal , P.K. et al. Gasoline Combustion Modeling of Direct and Port-Fuel Injected Engines Using a Reduced Chemical Mechanism SAE Technical Paper 2013-01-1098 2013 10.4271/2013-01-1098
- Gnana Sagaya Raj , A.R. , Mallikarjuna , J.M. , and Ganesan , V. Energy Efficient Piston Configuration for Effective Air Motion - A CFD Study Applied Energy 102 347 354 2013 10.1016/j.apenergy.2012.07.022