This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Data Driven Modeling of In-Cylinder Pressure of a Dual Fuel Compression Ignition Engine Operated with Renewable Fuels Using State Space Approach
ISSN: 0148-7191, e-ISSN: 2688-3627
Published July 09, 2018 by SAE International in United States
This content contains downloadable datasetsAnnotation ability available
Event: International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility
This research work is about the development of a data-driven model of a dual fuel diesel engine fuelled with renewable fuels (waste cooking oil and ethanol). In the first phase of the work, test engine was modified to operate in a dual fuel mode with ethanol as primary fuel and waste cooking oil as pilot fuel. It is followed by the development of the algebraic model comprising of sub-models like gas exchange process, charge compression process, combustion and expansion process. Wiebe’s function was used to develop the combustion model. In the second phase of the work a data driven model was developed using state space approach. Engine power output, mass of air, mass of waste cooking oil, mass of ethanol, in-cylinder volume and experimental pressure data were feed as the input to the model. Model is solved for in-cylinder pressure data. It was trained until the output of the model matches the experimental pressure data. Prediction error method was used to estimate outputs of the state space model. Further, the performance and prediction capability of the developed state space models were computed and results were compared with experimental and algebraic model data. Finally, the stability of the engine with respect to the chosen input conditions were analyzed using the concepts of pole zero and unit circle. It was found that developed state space model demonstrated a higher accuracy (i.e. 26%) than the algebraic model in capturing the dynamics of the output. Predicted output of the model is found to be very close with experimental data. It is also inferred that, the developed state space model claimed stable operation of the engine with respect to all the inputs other than mass of air and engine power output. Thus, this work concludes that state space approach is an efficient tool to predict the engine dynamic behavior and has a potential to forecast the behavior of the engine under analysis.
CitationNandagopal, S., Masimalai, S., and Krishnamurthy, K., "Data Driven Modeling of In-Cylinder Pressure of a Dual Fuel Compression Ignition Engine Operated with Renewable Fuels Using State Space Approach," SAE Technical Paper 2018-28-0022, 2018, https://doi.org/10.4271/2018-28-0022.
Data Sets - Support Documents
|[Unnamed Dataset 1]|
|[Unnamed Dataset 2]|
|[Unnamed Dataset 3]|
|[Unnamed Dataset 4]|
|[Unnamed Dataset 5]|
- Nandagopal, S., Masimalai, S.K., Subramaniyan, A.S., and Mayakrishnan, J.K., “Investigation on Electronic Assisted Primary Fuel Injection of Compression Ignition Engine Fueled with Waste Cooking Oil as Pilot Fuel for Improved Part Load Efficiency and Effective Waste Utilization,” SAE Technical Paper 2017-01-0768, 2017, doi:10.4271/2017-01-0768.
- Gui, M.M., Lee, K.T., and Bhatia, S., “Feasibility of Edible Oil vs. Non-Edible Oil vs. Waste Edible Oil as Biodiesel Feedstock,” Energy 33(11):1646-1653, 2008.
- Altın, R., Cetinkaya, S., and Yücesu, H.S., “The Potential of Using Vegetable Oil Fuels as Fuel for Diesel Engines,” Energy Conversion and Management 42(5):529-538, 2001.
- Lim, T.H., Bari, S., and Yu, C.W., “Using Crude Palm Oil (CPO) as Diesel Engine Fuel,” ASEAN Journal on Science and Technology for Development 19(2):1-13, 2017.
- Pramanik, K., “Properties and Use of Jatropha Curcas Oil and Diesel Fuel Blends in Compression Ignition Engine,” Renewable Energy 28(2):239-248, 2003.
- Puhan, S., Vedaraman, N., Sankaranarayanan, G., and Bharat Ram, B.V., “Performance and Emission study of Mahua Oil (Madhuca indica Oil) Ethyl Ester in a 4-Stroke Natural Aspirated Direct Injection Diesel Engine,” Renewable Energy 30(8):1269-1278, 2005.
- Nabi, M.N., Rahman, M.M., and Akhter, M.S., “Biodiesel from Cotton Seed Oil and Its Effect on Engine Performance and Exhaust Emissions,” Applied Thermal Engineering 29(11):2265-2270, 2009.
- Sayin, C., Ozsezen, A.N., and Canakci, M., “The Influence of Operating Parameters on the Performance and Emissions of a DI Diesel Engine Using Methanol-Blended-Diesel Fuel,” Fuel 89(7):1407-1414, 2010.
- Ghadge, S.V. and Raheman, H., “Biodiesel Production from Mahua (Madhuca Indica) Oil Having High Free Fatty Acids,” Biomass and Bioenergy 28(6):601-605, 2005.
- Lata, D.B. and Misra, A., “Theoretical and Experimental Investigations on the Performance of Dual Fuel Diesel Engine with Hydrogen and LPG as Secondary Fuels,” International Journal of Hydrogen Energy 35(21):11918-11931, 2010.
- Papagiannakis, R.G. and Hountalas, D.T., “Combustion and Exhaust Emission Characteristics of a Dual Fuel Compression Ignition Engine Operated with Pilot Diesel Fuel and Natural Gas,” Energy Conversion and Management 45(18):2971-2987, 2004.
- Luijten, C.C.M. and Kerkhof, E., “Jatropha Oil and Biogas in a Dual Fuel CI Engine for Rural Electrification,” Energy Conversion and Management 52(2):1426-1438, 2011.
- Murugan, S., Ramaswamy, M.C., and Nagarajan, G., “Assessment of Pyrolysis Oil as an Energy Source for Diesel Engines,” Fuel Processing Technology 90(1):67-74, 2009.
- Koc, A.B. and Abdullah, M., “Performance and NO x Emissions of a Diesel Engine Fueled with Biodiesel-Diesel-Water Nanoemulsions,” Fuel Processing Technology 109:70-77, 2013.
- Sahoo, B.B., Sahoo, N., and Saha, U.K., “Effect of Engine Parameters and Type of Gaseous Fuel on the Performance of Dual-Fuel Gas Diesel Engines-A Critical Review,” Renewable and Sustainable Energy Reviews 13(6):1151-1184, 2009.
- Kumar, M.S., Ramesh, A., and Nagalingam, B., “An Experimental Comparison of Methods to Use Methanol and Jatropha Oil in a Compression Ignition Engine,” Biomass and Bioenergy 25(3):309-318, 2003.
- Kumar, M., Senthil, G.N., and Arul Selvan, S., “A Comprehensive Assessment on the Effect of High Octane Fuels Induction on Engine’s Combustion Behaviour of a Mahua Oil Based Dual Fuel Engine,” Fuel 199:176-184, 2017.
- Li, H., Liu, S., Liew, C., Gatts, T. et al., “An Investigation of the Combustion Process of a Heavy-Duty Dual Fuel Engine Supplemented with Natural Gas or Hydrogen,” International Journal of Hydrogen Energy 42(5):3352-3362, 2017.
- Krishnamurthy, K., “Parameter Estimation of Nonlinear Biomedical Systems Using Extended Kalman Filter Algorithm: Development of Patient Specific Models,” Computational Tools and Techniques for Biomedical Signal Processing 76, 2016.
- Kapur, J.N., Mathematical Modelling (New Age International, 1988).
- Deb, M., Majumder, P., Majumder, A., Roy, S., and Banerjee, R., “Application of Artificial Intelligence (AI) in Characterization of the Performance-Emission Profile of a Single Cylinder CI Engine Operating with Hydrogen in Dual Fuel Mode: An ANN Approach with Fuzzy-Logic Based Topology Optimization,” International Journal of Hydrogen Energy 41(32):14330-14350, 2016.
- Chakraborty, A., Roy, S., and Banerjee, R., “An Experimental Based ANN Approach in Mapping Performance-Emission Characteristics of a Diesel Engine Operating in Dual-Fuel Mode with LPG,” Journal of Natural Gas Science and Engineering 28:15-30, 2016.
- Sharma, A., Sharma, H., Sahoo, P.K., Tripathi, R.K., and Meher, L.C., “ANN Based Modeling of Performance and Emission Characteristics of Diesel Engine Fuelled with Polanga Biodiesel at Different Injection Pressures,” International Energy Journal 15(2), 2016.
- Taghavifar, H., Taghavifar, H., Mardani, A., and Mohebbi, A., “Modeling the Impact of In-Cylinder Combustion Parameters of DI Engines on Soot and NOx Emissions at Rated EGR Levels Using ANN Approach,” Energy Conversion and Management 87:1-9, 2014.
- Channapattana, S.V., Pawar, A.A., and Kamble, P.G., “Optimisation of Operating Parameters of DI-CI Engine Fueled with Second Generation Bio-Fuel and Development of ANN Based Prediction Model,” Applied Energy 187:84-95, 2017.
- Svensson, A. and Schön, T.B., “A Flexible State-Space Model for Learning Nonlinear Dynamical Systems,” Automatica 80:189-199, 2017.
- Verhaegen, M. and Dewilde, P., “Subspace Model Identification Part 1. The Output-Error State-Space Model Identification Class of Algorithms,” International Journal of Control 56(5):1187-1210, 1992.
- Ljung, L., System Identification (John Wiley & Sons, Inc., 1999).
- Verhaegen, M., “Identification of the Deterministic Part of MIMO State Space Models Given in Innovations Form from Input-Output Data,” Automatica 30(1):61-74, 1994.
- Johansson, R., Robertsson, A., Nilsson, K., and Verhaegen, M., “State-Space System Identification of Robot Manipulator Dynamics,” Mechatronics 10(3):403-418, 2000.
- Williams, J., “An Overview of Misfiring Cylinder Engine Diagnostic Techniques Based on Crankshaft Angular Velocity Measurements,” SAE Technical Paper 960039, 1996, doi:10.4271/960039.
- Kamalanand, K. and Ramakrishnan, S., “Effect of Gadolinium Concentration on Segmentation of Vasculature in Cardiopulmonary Magnetic Resonance Angiograms,” Journal of Medical Imaging and Health Informatics 5(1):147-151, 2015.
- Åström, K.J., “Maximum Likelihood and Prediction Error Methods,” Automatica 16(5):551-574, 1980.
- Chikuse, Y., “State Space Models on Special Manifolds,” Journal of Multivariate Analysis 97(6):1284-1294, 2006.
- Yao, Y., Yang, K., Huang, M., and Wang, L., “A State-Space Model for Dynamic Response of Indoor Air Temperature and Humidity,” Building and Environment 64:26-37, 2013.
- Hu, J. and Karava, P., “A State-Space Modeling Approach and Multi-Level Optimization Algorithm for Predictive Control of Multi-Zone Buildings with Mixed-Mode Cooling,” Building and Environment 80:259-273, 2014.
- Chen, X., Wang, Q., and Srebric, J., “A Data-Driven State-Space Model of Indoor Thermal Sensation Using Occupant Feedback for Low-Energy Buildings,” Energy and Buildings 91:187-198, 2015.
- Noël, J.-P., Esfahani, A.F., Kerschen, G., and Schoukens, J., “A Nonlinear State-Space Approach to Hysteresis Identification,” Mechanical Systems and Signal Processing 84:171-184, 2017.
- Heywood, J.B., Internal Combustion Engine Fundamentals (St. Louis, MO: McGraw-Hill Book Company, 1988).
- Ghojel, J.I., “Review of the Development and Applications of the Wiebe Function: A Tribute to the Contribution of Ivan Wiebe to Engine Research,” International Journal of Engine Research 11(4):297-312, 2010.
- Pereira, J.P., Valle, R.M., and Barros, J.E.M., “Algebraic Modeling for Thermodynamic Study of the Compression-Ignition Engine,” SAE Technical Paper 2005-01-4143, 2005, 2005, doi:10.4271/2005-01-4143.