This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Simulation Study of Optimal Integration of a Rankine Cycle Based Waste Heat Recovery System into the Cooling System of a Long-Haul Heavy Duty Truck
Technical Paper
2018-01-1779
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
As a promising solution to improve fuel efficiency of a long-haul heavy duty truck with diesel engine, organic Rankine cycle (ORC) based waste heat recovery system (WHR) by utilizing the exhaust gas from internal combustion engine has continuously drawn attention from automobile industry in recent years. The most attractive concept of ORC-based WHR system is the conversion of the thermal energy of exhaust gas recirculation (EGR) and exhaust gas from Tailpipe (EGT) to kinetic energy which is provided to the engine crankshaft. Due to a shift of the operating point of the engine by applying WHR system, the efficiency of the overall system increases and the fuel consumption reduces respectively. However, the integration of WHR system in truck is challenging by using engine cooling system as heat sink for Rankine cycle. The coolant mass flow rate influences strongly on the exhaust gas bypass which ensures a defined subcooling after condenser to avoid cavitation of pump. The coolant temperature decides the condensation pressure which impacts on the efficiency of WHR system. This paper aims to investigate the impacts of cooling conditions on WHR system by simulation. An optimal integration position of WHR condenser has been found. A complex 0D/1D-simulation model for a turbocharged production heavy duty engine with low-/high-temperature cooling circuits and a WHR system with ethanol as working fluid have been established in a conventional 1D-simulation software. A comparison between two WHR system layouts is made to determine WHR system concepts. An optimization for thermal management of the engine has been conducted to evaluate the maximal recovered energy in consideration of cooling fan engagement, thermostat operation and interactions between subsystems under transient conditions.
Authors
Topic
Citation
Yang, K., Grill, M., and Bargende, M., "A Simulation Study of Optimal Integration of a Rankine Cycle Based Waste Heat Recovery System into the Cooling System of a Long-Haul Heavy Duty Truck," SAE Technical Paper 2018-01-1779, 2018, https://doi.org/10.4271/2018-01-1779.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 |
Also In
References
- European Commission-Climate Action 2014
- Ziviani , D. , Beyene , A. , and Venturini , M. Advances and Challenges in ORC Systems Modeling for Low Grade Thermal Energy Recovery Appl Energy 121 79 95 2014
- Preißinger , M. and Schwöbel , J. 2015
- Grill , M. , Chiodi , M. , Berner , H.-J. , and Bargende , M. Calculating the Thermodynamic Properties of Burnt Gas and Vapor Fuel for User-Defined Fuels MTZ Worldwide 68 5 30 35 2007
- Kozuch , P. , Maderthaner , K. , Grill , M. , and Schmid , A. Simulation der Verbrennung und Schadstoffbildung bei schweren Nutzfahrzeugmotoren Daimler AG Symposium Verbrennungsdiagnostig Baden-Baden 2010
- Grill , M. , Rether , D. , Schmid , A. , and Bargende , M. 2010
- Bargende , M. and Grill , M. Zukunft der Motorprozessrechnung und 1D-Simulation Motortechnische Zeitschrift, Jubiläumsausgabe Springer Vieweg Wiesbaden 2014
- Kaal , B. , Grill , M. , and Bargende , M. Transient Simulation of Nitrogen Oxide Emissions of CI Engines SAE Technical Paper 2016-01-1002 2016 10.4271/2016-01-1002
- Kožuch , P. , Grill , M. , and Bargende , M. 2004
- Töpfer , T. , Dingel , O. , Friedrich , I. , and Seebode , J. 2015
- Reference Fluid Thermodynamic and Transport Properties Database (REFPROP) 2016
- Yang , F. , Zhang , H. , Bei , C. , Song , S. 2015
- Li , Y.R. , Du , M.T. , Wu , C.M. , and Wu , S.Y. Potential of Organic Rankine Cycle using Zeotropic Mixtures as working Fluids for waste Heat Recovery Energy 77 509 519 2014
- Walraven , D. , Laenen , B. , and D'haeseleer , W. Economic System Optimization of Air Cooled Organic Rankine Cycles Powered by Low-Temperature Geothermal Heat Sources Energy 80 104 113 2015
- Vetter , C. 2014
- Seume , J. , Peters , M. , Kunte , H. 2017
- Horst , T. 2015
- Gamma Technology 2017
- Di Battista , D. , Mauriello , M. , and Cipollone , R. Effects of an ORC Based Heat Recovery System on the Performances of a Diesel Engine SAE Technical Paper 2015-01-1608 2015 10.4271/2015-01-1608
- Mondt , J.R. Cleaner Cars: The History and Technology of Emission Control Since the 1960s Warrendale, PA SAE International 2000 0768002222
- Mazar , B. 2010
- Fischer . G. 2000
- Yang , K. and Grill , M. Evaluation of Engine-Related Restrictions for the Global Efficiency by Using a Rankine Cycle-Based Waste Heat Recovery System on Heavy Duty Truck by Means of 1D-Simulation SAE Technical Paper 2018-01-1451 2018 10.4271/2018-01-1451