This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Method to Evaluate the Compression Ratio in IC Engines with Porous Thermal Barrier Coatings
Technical Paper
2018-01-1778
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The compression ratio is an important engine design parameter. It determines to a large extend engine properties like the achievable efficiency, the heat losses from the combustion chamber and the exhaust losses. The same properties are affected by insulation of the combustion chamber. It is therefore especially important to know the compression ratio when doing experiments with thermal barrier coatings (TBC).
In case of porous TBCs, the standard methods to measure the compression ratio can give wrong results. When measuring the compression ratio by volume, using a liquid, it is uncertain if the liquid fills the total porous volume of the coating. And for a thermodynamic compression ratio estimation, a model for the heat losses is needed, which is not available when doing experiments with insulation.
The subject of this paper is the evaluation of an alternative method to assess the compression ratio. It is based on motored cylinder pressure data like other thermodynamic methods but does not need a model for the heat losses. The validation and application of the method is done with data from experiments involving two types of porous TBCs, performed on a light duty single cylinder diesel engine. The results indicate that the proposed method accurately predicts the compression ratio for porous thermal barrier coatings.
Authors
Topic
Citation
Somhorst, J., Oevermann, M., Bovo, M., and Denbratt, I., "A Method to Evaluate the Compression Ratio in IC Engines with Porous Thermal Barrier Coatings," SAE Technical Paper 2018-01-1778, 2018, https://doi.org/10.4271/2018-01-1778.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
Unnamed Dataset 7 | ||
Unnamed Dataset 8 |
Also In
References
- Wallace , F.J. , Kao , T.K. , Tarabad , M. , Alexander , W.D. et al. Thermally Insulated Diesel Engines Proceedings of the Institution of Mechanical Engineers. Part A, Journal of Power and Energy 1984 97 105
- Woschni , G. , Spindler , W. , and Kolesa , K. Heat Insulation of Combustion Chamber Walls - A Measure to Decrease the Fuel Consumption of IC Engines? SAE Technical Paper 870339 1987 10.4271/870339
- Jaichandar , S. and Tamilporai , P. Low Heat Rejection Engines - An Overview SAE Technical Paper 2003-01-0405 2003 10.4271/2003-01-0405
- Abedin , M. , Masjuki , H. , Kalam , M. , Sanjid , A. et al. Energy Conversion and Management 2014
- Klein , M. and Eriksson , L. Methods for Cylinder Pressure Based Compression Ratio Estimation SAE Technical Paper 2006-01-0185 2006 10.4271/2006-01-0185
- Irimescu , A. , Tornatore , C. , Marchitto , L. , and Merola , S.S. Compression Ratio and Blow-By Rates Estimation Based on Motored Pressure Trace Analysis for an Optical Spark Ignition Engine Applied Thermal Engineering 61 2 101 109 2013 10.1016/j.applthermaleng.2013.07.036
- Woschni , G. A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine SAE Technical Paper 670931 1967 10.4271/670931
- Hohenberg , G.F. Advanced Approaches for Heat Transfer Calculations SAE Technical Paper 790825 1979 10.4271/790825
- Krieg , K. 1990
- Heywood , J.B. Internal Combustion Engine Fundamentals McGraw-Hill 1988 0-07-100499-8
- Namazian , M. and Heywood , J.B. Flow in the Piston-Cylinder-Ring Crevices of a Spark-Ignition Engine: Effect on Hydrocarbon Emissions, Efficiency and Power SAE Technical Paper 820088 1982 10.4271/820088
- Brunt , M.F.J. and Pond , C.R. Evaluation of Techniques for Absolute Cylinder Pressure Correction SAE Technical Paper 970036 1997 10.4271/970036
- Aronsson , U. , Solaka , H. , Lequien , G. , Andersson , O. et al. Analysis of Errors in Heat Release Calculations Due to Distortion of the In-Cylinder Volume Trace from Mechanical Deformation in Optical Diesel Engines SAE Int. J. Engines 5 1561 1570 2012 10.4271/2012-01-1604
- Woschni , G. and Huber , K. Influence of Soot Deposits on Combustion Chamber Walls on Heat Losses in Diesel Engines SAE Technical Paper 910297 1991 10.4271/910297
- Morel , T. , Wahiduzzaman , S. , Tree , D.R. , and Dewitt , D.P. Effect of Speed, Load, and Location on Heat Transfer in a Diesel Engine - Measurements and Predictions SAE Technical Paper 870154 1987 10.4271/870154
- Schmitt , M. , Frouzakis , C.E. , Wright , Y.M. , Tomboulides , a.G. et al. Investigation of Wall Heat Transfer and Thermal Stratification under Engine-Relevant Conditions Using DNS International Journal of Engine Research 17 1 63 75 2016 10.1177/1468087415588710