This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
SmEdA Vibro-Acoustic Modeling of a Trimmed Truck Cab in the Mid-Frequency Range
Technical Paper
2018-01-1506
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The City Lightweight and Innovative Cab (CLIC) project was a scientific collaboration gathering public and private organizations. The aim was to propose an innovative lighten truck cab, where a high strength steel was used. As long as it could affect directly the acoustic environment of the cab, it was necessary to be able to simulate the vibroacoustic behavior of the truck cab in the mid frequency range. The dissipative treatments used for noise and vibration control such as viscoelastic patches and acoustic absorbing materials must then be taken into account in the problem. A process based on the SmEdA (Statistical modal Energy distribution Analysis) method was developed and is presented in this paper. SmEdA allows us substructuring the global problem, to study the interaction between the floor and the interior cavity. The process consists in building finite element models (FEM) of each subsystem (floor, internal cavity), including the dissipative material (damping layer, poroelastic material). Standard modal FEM calculations are then performed for each uncoupled subsystem. From the spatial mode shapes, and the modal strain -kinetic energies, the modal loss factors of both subsystems are estimated. Finally, the pressure levels inside the cavity are deduced from the resolution of the SmEdA equations. To validate this process, a truck cabin has been excited mechanically on a rail of the floor and the pressure levels at different positions inside the cabin were measured for different configurations of dissipative treatment. Comparisons between SmEdA and experimental results allows us to assess the accuracy of the proposed method.
Authors
- Laurent Maxit - INSA Lyon, Laboratoire Vibrations-Acoustique
- Jean-Louis Guyader - INSA Lyon, Laboratoire Vibrations-Acoustique
- Kerem Ege - INSA Lyon, Laboratoire Vibrations-Acoustique
- Youssef Gerges - INSA Lyon, Laboratoire Vibrations-Acoustique
- Ha Dong Hwang - INSA Lyon, Laboratoire Vibrations-Acoustique
- Céline Sandier - INSA Lyon, Laboratoire Vibrations-Acoustique
Topic
Citation
Maxit, L., Guyader, J., Ege, K., Gerges, Y. et al., "SmEdA Vibro-Acoustic Modeling of a Trimmed Truck Cab in the Mid-Frequency Range," SAE Technical Paper 2018-01-1506, 2018, https://doi.org/10.4271/2018-01-1506.Also In
References
- Lyon , R.H. Statistical Energy Analysis of Dynamical Systems: Theory and Application Cambridge MIT Press 1975
- Le Bot , A. and Cotoni , V. Validity Diagrams of Statistical Energy Analysis Journal of Sound and Vibration 329 2 221 235 2010
- Maxit , L. and Guyader , J.L. Estimation of SEA Coupling Loss Factors Using a Dual Formulation and FEM Modal Information, Part I: Theory Journal of Sound and Vibration 239 907 930 2001
- Maxit , L. and Guyader , J.L. Extension of SEA Model to Subsystems with Non-uniform Modal Energy Distribution Journal of Sound and Vibration 265 337 358 2003
- Maxit , L. 2016 https://up2hf.sciencesconf.org/conference/up2hf/III_Up2HF_Laurent_Maxit.pdf
- Maxit , L. , Ege , K. , Totaro , N. , and Guyader , J.L. Non Resonant Transmission Modelling with Statistical Modal Energy Distribution Analysis Journal of Sound and Vibration 333 499 519 2014
- Hwang , H.D. , Maxit , L. , Ege , K. , Gerges , Y. et al. SmEdA Vibro-Acoustic Modelling in the Mid-Frequency Range Including the Effect of Dissipative Treatments Journal of Sound and Vibration 393 187 215 2017
- Guyader , J.L. and Cacciolati , C. Viscoelastic Properties of Single Layer Plate Material Equivalent to Multi-Layer Composites Plate INTER-NOISE and NOISE-CON Congress and Conference Proceedings 2007
- Gerges , Y. , Hwang , H.D. , Ege , K. , Maxit , L. et al. Vibroacoustic Modelling of a Trimmed Truck Cab in the Mid Frequency Range Proceedings of Internoise 2015 San Francisco 2015
- Totaro , N. and Guyader , J.L. Extension of the Statistical Modal Energy Distribution Analysis for Estimating Energy Density in Coupled Subsystems Journal of Sound and Vibration 331 264 289 2012