This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Failure Mode and Fatigue Behavior of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets Made with Different Processing Conditions

Journal Article
2018-01-1237
ISSN: 1946-3979, e-ISSN: 1946-3987
Published April 03, 2018 by SAE International in United States
Failure Mode and Fatigue Behavior of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets Made with Different Processing Conditions
Sector:
Citation: Pan, J., Chen, W., Sung, S., Su, X. et al., "Failure Mode and Fatigue Behavior of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets Made with Different Processing Conditions," SAE Int. J. Mater. Manf. 11(4):327-340, 2018, https://doi.org/10.4271/2018-01-1237.
Language: English

References

  1. Claus, L. and Weitzel, S. , “Self-Tapping Fasteners for Lightweight Designs,” SAE Technical Paper 2014-01-0785 , 2014, doi:10.4271/2014-01-0785.
  2. Skovron, J., Mears, L., Ulutan, D., Detwiler, D. et al. , “Characterization of Flow Drill Screwdriving Process Parameters on Joint Quality,” SAE Int. J. Mater. Manf. 8(1):35-44, 2015, doi:10.4271/2014-01-2241.
  3. Skovron, J.D., Prasad, R.R., Ulutan, D., Mears, L. et al. , “Effect of Thermal Assistance on the Joint Quality of Al6063-T5A during Flow Drill Screwdriving,” ASME Journal of Manufacturing Science and Engineering 137(5):051019-051019-8, 2015, doi:10.1115/1.4031242.
  4. Hong, S.H., Yan, F., Sung, S.-J., Pan, J. et al. , “Investigation of Failure Mode and Fatigue Behavior of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets,” SAE Int. J. Mater. Manf. 9(3):746-750, 2016, doi:10.4271/2016-01-0501.
  5. Zhang, L., Sung, S.-J., Pan, J., Su, X. et al. , “Closed-Form Structural Stress Solutions for Fatigue Life Estimations of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets,” SAE Int. J. Mater. Manf. 10(2):154-159, 2017, doi:10.4271/2017-01-0470.
  6. Scholz, C.S., Kopp, G., and Friedrich, H.E. , “Influence of Corrosive Conditions on the Mechanical Performance of Flow Drill Screw Joints between Light Metals,” Materials Science Forum 879:1725-1730, 2017, doi:10.4028/www.scientific.net/MSF.879.1725.
  7. Pan, J., Chen, W.-N., Sung, S.-J., Su, X. et al. , “Failure Mode and Fatigue Behavior of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets of Different Thicknesses,” SAE Technical Paper 2018-01-1239 , 2018, doi:10.4271/2018-01-1239.
  8. Sung, S.-J., Chen, J., and Pan, J. , “Stress Intensity Factor Solutions for Similar and Dissimilar Spot Welds in Lap-Shear Specimens under Camped Loading Conditions,” Engineering Fracture Mechanics 179:328-347, 2017, doi:10.1016/j.engfracmech.2017.05.016.
  9. Lin, P.-C. and Pan, J. , “Closed-Form Structural Stress and Stress Intensity Factor Solutions for Spot Welds under Various Types of Loading Conditions,” International Journal of Solids and Structures 45:3996-4020, 2008, doi:10.1016/j.ijsolstr.2008.02.006.
  10. Su, Z.-M., Lin, P.-C., Lai, W.-J., and Pan, J. , “Fatigue Analyses of Self-Piercing Rivets and Clinch Joints in Lap-Shear Specimens of Aluminum Sheets,” International Journal of Fatigue 72:53-65, 2015, doi:10.1016/j.ijfatigue.2014.09.022.
  11. Reißner, H. , “Über die unsymmetrische biegung dünner kreisringplatten,” Ingenieur-Archiv 1(1):72-83, 1929, doi:10.1007/BF02079709.
  12. Timoshenko, S. and Woinowsky-Krieger, S. , Theory of Plates and Shells Second Edition (New York: McGraw-Hill, 1959).
  13. Wagner, L. and Wollmann, M. , “Shot Peening of Non-Ferrous Alloys to Enhance Fatigue Performance,” ICSP-10, Tokyo, Japan, Sept. 15-18, 2008.
  14. Karolczuk, A., Kurek, M., and Łagoda, T. , “Fatigue Life of Aluminum Alloy 6082 T6 under Constant and Variable Amplitude Bending with Torsion,” Journal of Theoretical and Applied Mechanics 53(2):421-430, 2015, doi:10.15632/jtam-pl.53.2.421.

Cited By