This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Working Load Measurement and Analysis of Bolted Joint under Off-road Vehicle Operation
Technical Paper
2018-01-1234
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
In this study, we propose a method of measuring and analyzing the load on bolted joints used in a machine under off-road vehicle operation. Working load measurement under actual machine operation and the results of its analysis are shown as load frequency diagrams. An example of the measurement analysis of a load (three types of load: axial force, bending moment, and torsional torque) added to a bolted joint shank during actual machine operation is shown. In this paper, we describe how to apply the results of load analysis to the load condition at the design and experimental development stages.
Recommended Content
Technical Paper | Automated Support of Manual Fastening Operations |
Journal Article | An Objective Measure for Automotive Surface Contamination |
Technical Paper | Low Cost
|
Authors
Topic
Citation
Hareyama, S. and Manabe, K., "Working Load Measurement and Analysis of Bolted Joint under Off-road Vehicle Operation," SAE Technical Paper 2018-01-1234, 2018, https://doi.org/10.4271/2018-01-1234.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- 1968
- Bickford , J. H. An Introduction to the Design and Behavior of Bolted Joints (Third Edition) CRC Press 213 268 1995
- Bolted Joints Design Committee Analysis and Design for Bolted Joints, Japan Research Institute for Screw Threads and Fasteners (JFRI) 2016
- VDI2230 Blatt 1 2003
- Hareyama , S. and Kodama , S. A Study on Confidence Limit for Two Independent Probability Variables in Engineering Problems (Applications to Limit of Transmitted Torque in Disk Clutch and Bolt Axial Tension Control) JSME International Journal (Series III) 33 2 256 262 1990
- Hareyama , S. , Manabe , K. , Nakashima , M. Improving Tightening Reliability on Bolted Joints for Calibrated Wrench Method (An Analysis on Optimum Tightening Torque by Confidence Limit Ellipse) Proceedings of ASME 2013 International Mechanical Engineering Congress & Exposition, Vol. 2B: Advanced Manufacturing 12 2013
- Hareyama , S. , Manabe , K. Advantage of Elliptical Confidence Limit Method for Bolted Joint Tightening Reliability Proceedings of ASME 10 2015
- Hareyama , S. , Manabe , K. , Shimodaira , T. , Naganawa , T. Experimental Study to Verify Elliptical Confidence Limit Method for Bolted Joint Tightening Proceedings of the ASME IMECE2016-66336 9 2016
- Kumar , R. Fatigue Life Estimation for Inters in Class 1 Component ASME Journal of Pressure Vessel Technology 1998 120 81 85
- Ellis , F. V. , Sielski , D. R. , Viswanathan , R. An Improved Analytical Method for Life Prediction of Bolting ASME Journal of Pressure Vessel Technology 123 71 74 2001
- Hareyama , S. , Manabe , K. , Shimodaira , T. and Hoshi , A. Working Load Analysis and Strength Estimation for Bolted Joints during Actual Machine Operation Proceedings of ASME 10 2014
- Hareyama , S. , Manabe , K. , Nakashima , K. , Shimodaira , T. , and Hoshi , A. Residual Clamping Force Estimation and Lifetime Prediction to Loosening Failure of Bolted Joints SAE Technical Paper 2017-01-0479 2017 10.4271/2017-01-0479
- Junker , G.H. and Williams , D.A. Rules for Design and Calculation of High-Duty Bolted Joints (Part One: Basic Design) Sub Assembly 11 3 22 24 1973
- Junker , G.H. SAE Transactions 690055 314 335 1969
- Baggerly , G.R. Hydrogen-Assisted Stress Cracking of High-Strength Wheel Bolts Engineering Failure Analysis 3 4 231 240 1996
- Fukuoka , T. , Nomura , M. , Kamihira , T. Finite Element Analysis of the Cyclic Stress Amplitude of Wheel Bolts for Large Vehicles Transactions of the Japan Society of Mechanical Engineers 77 782 3840 3849 2011
- JFRI Committee for Research of Bolt Tightening 1978
- Weber , J.O. , Berger , C. , and Arz , U. Nut Resilience and Vibration Fatigue Limit of Bolted Joints SAE Technical Paper Series SAE-2008-01-0544 7 2008
- Minguez , M.J. and Vogwell , J. Effect of Torque Tightening on the Fatigue Strength of Bolted Joints, Engineering Failure Analysis 13 8 1410 1421 2006
- Sawa , T. , Omiya , Y. New Design Formula for Bolted Joints Under Tensile Loads Proceedings of ASME 2013 International Mechanical Engineering Congress & Exposition, Vol. 2B: Advanced Manufacturing 10 2013