This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Computational Methodology for Multi-Objective Fatigue Life Optimization of Welded Brake Flange on Full Beam Axles
Technical Paper
2018-01-1019
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Weld failure of a brake flange can put a driver’s life at risk. Two critical loading situations-torsional loading and vertical beaming loading-can result in brake flange failure. Two corresponding laboratory tests have been performed to ensure that the brake flanges pass the minimum standard requirement. The first is a brake reaction test, which is conducted in a situation that replicates the sudden braking operation of a vehicle. For this test, length, size, and penetration depth of the weld are critical parameters for determining the ability to prevent braking load failure. Among these factors, the length is the most crucial. The second test is a vertical beaming test, which is done in a condition that mimics the situation where a vehicle encounters a pot hole. Contrary to the previous test, an increased weld length can be detrimental in this case when the weld is moved to a higher stress location. Weld location and position can play an important role in maximizing the fatigue life to prevent such brake flange weld failures. In this paper, a computational approach is proposed for obtaining the optimal parameters to satisfy both tests. The weld life prediction is performed using a traction-structural stress method. A two-stage parametric modeling approach is suggested to perform the optimization process. The first stage determines the viability of uninterrupted/continuous weld to meet the two tests by positioning it along the inward and/or outward side of the brake flange. The second stage involves determining the optimal weld length by using a Design of Experiments (DOE) approach. When the length and positioning of the weld are optimized, components’ performance can significantly improve and the need for experimental testing is largely reduced.
Recommended Content
Authors
Citation
Vasu, A., Xing, S., Mei, J., Chung, C. et al., "A Computational Methodology for Multi-Objective Fatigue Life Optimization of Welded Brake Flange on Full Beam Axles," SAE Technical Paper 2018-01-1019, 2018, https://doi.org/10.4271/2018-01-1019.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 |
Also In
References
- Maddox , S. Fatigue Strength of Welded Structures Woodhead Publishing 2014
- Gurney , T. 1979
- Stacey , A. , Burdekin , F , and Maddox , S. The Revised BS PD 6493 Assessment Procedure-Application to Offshore Structures American Society of Mechanical Engineers New York 1996
- Braid , J. , Bell , R. , and Militaru , D. Fatigue Life of as-Welded, Repaired, and Hammer-Peened Joints in High-Strength Structural Steel Welding in the World/Le Soudage dans le Monde 5 39 248 261 1997
- Vasu , A. , Hu , Y. , and Grandhi , R.V. Differences in Plasticity due to Curvature in Laser Peened Components Surface and Coatings Technology 235 648 656 2013
- Hobbacher , A. Recommendations for Fatigue Design of Welded Joints and Components New York Welding Research Council 2009
- Radaj , D. Review of Fatigue Strength Assessment of Nonwelded and Welded Structures Based on Local Parameters International Journal of Fatigue 18 3 153 170 1996
- Fricke , W. Fatigue Analysis of Welded Joints: State of Development Marine Structures 16 3 185 200 2003
- Hobbacher , A. The New IIW Recommendations for Fatigue Assessment of Welded Joints and Components-A Comprehensive Code Recently Updated International Journal of Fatigue 31 1 50 58 2009
- Correia , D. , Gonçalves , C. , Da Cunha , S. , and Ferraresi , V. Comparison between Genetic Algorithms and Response Surface Methodology in GMAW Welding Optimization Journal of Materials Processing Technology 160 1 70 76 2005
- Dong , P. , Hong , J. , Osage , D. A. , Dewees , D. J. et al. Welding Research Council Bulletin 2010
- 2007
- Vasu , A. , Gobal , K. , and Grandhi , R. A Computational Methodology for Determining the Optimum Re-Peening Schedule to Increase the Fatigue Life of Laser Peened Aircraft Components International Journal of Fatigue 70 395 405 2015
- Mei , J. and Dong , P. An Equivalent Stress Parameter for Multi-Axial Fatigue Evaluation of Welded Components Including Non-proportional Loading Effects International Journal of Fatigue 101 297 311 2017
- Xing , S. , Dong , P. , and Wang , P. A Quantitative Weld Sizing Criterion for Fatigue Design of Load-Carrying Fillet-Welded Connections International Journal of Fatigue 101 2 448 458 2017
- ASTM E407-07 Standard Practice for Microetching Metals and Alloys West Conshohocken PA ASTM International 2015
- AWS D8.8M:2007
- Hong , J. and Forte , T. Fatigue Evaluation Procedures for Multiaxial Loading in Welded Structures Using Battelle Structural Stress Approach ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering 2014
- Vasu , A. , Chung , J. , Padfield , C. , Desai , R. Quantification of Weld Size Parameters for Throat Failure Prevention in a Brake Flange Axle Weld Subjected to Torsional Loading with Structural Stress Approach International Journal of Structural Integrity
- Kim , J. , Kim , C. , Jin , T. , and Dong , P. Mean Load Effect on Fatigue of Welded Joints Using Structural Stress and Fracture Mechanics Approach Nuclear Engineering and Technology 38 3 277 284 2006
- Vasu , A. and Grandhi , R. Response Surface Model Using the Sorted k-Fold Approach AIAA Journal. 52 2336 2341 2014