This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Transmission Gear Whine Control by Multi-Objective Optimization and Modification Design
Technical Paper
2018-01-0993
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Transmission gear whine noise is one of the main noise problems in powertrain NVH, which is caused by dynamic meshing force of gear pairs, it acts as transmission error. Due to the coupling effects of transmission gears, shaft, bearings and housing, it needs comprehensive management from many aspects to solve the problem of gear whine noise. Aiming at gear whine noise of a 4-speed AMT used in electric bus, the main noise sources is identified by using the order tracking analysis approach firstly. Secondly, gear misalignment and contributions of system deformation to the misalignment is analyzed by means of simulation tools, and the factor is taken into account in the subsequent gear modification design. At last, based on the improved Smith slice method, the calculation model of transmission error of helical gears is established. Combining with the various driving conditions of vehicle, using reducing peak to peak value of transmission error, Uniform distribution of tooth surface load and other indicators as a mean to reduce the impact of vibrations and noise, an improved particle swarm optimization (PSO) algorithm is adopted to optimize modification parameters to obtain the best micro-modification tooth surface. The optimization results show that this optimization method proposed in this paper can effectively eliminate gears whine noise of transmission.
Recommended Content
Authors
Topic
Citation
Lei, Y., Hou, L., Fu, Y., Hu, J. et al., "Transmission Gear Whine Control by Multi-Objective Optimization and Modification Design," SAE Technical Paper 2018-01-0993, 2018, https://doi.org/10.4271/2018-01-0993.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- Kohler , H.K. , Pratt , A. , and Thompson , A.M. Dynamics and Noise of Parallel Axis Gearing Inst. Mech. Eng. Conf. Gearing 1970 111 121
- Furley , A.J.D. , Jeffries , J.A. , and Smith , J.D. Drive Trains in Printing Machines Inst. Mech. Eng. Conference, Vibrations in Rotating Machinery Cambridge 1980 239 245
- Palmer , D. and Munro , R.G. Measurements of Transmission Error, Vibration and Noise in Spur Gears British Gear Association Congress 1995
- Beacham , M. , Bell , D. , Powell , N. , and Savage , M. Development of Transmission Whine Prediction Tools SAE Technical Paper 1999-01-1767 1999 10.4271/1999-01-1767
- Singh , P. and Sai Aditya , K. Study of Effect of Variation in Micro-Geometry of Gear Pair on Noise Level at Transmission SAE Technical Paper 2015-26-0130 2015 10.4271/2015-26-0130
- Neusser , Z. , Sopouch , M. , Schaffner , T. , and Priebsch , H. Multibody Dynamics Based Gear Mesh Models for Prediction of Gear Dynamics and Transmission Error SAE Technical Paper 2010-01-0897 2010 10.4271/2010-01-0897
- Joshi , Y.V. Gear Whine Noise Due to Deformation-A Case Study[R] SAE Technical Paper 2017-01-1122 2017
- Bonori , G. , Barbieri , M. , and Pellicano , F. Optimum Profile Modifications of Spur Gears by Means of Genetic Algorithms Journal of Sound and Vibration 313 3 603 616 2008
- Yue , G. , Niu , W. , Zhao , J. , Kong , D. et al. Gear Whine Resolution by Tooth Modification and Multi-Body Dynamics Analysis SAE Technical Paper 2016-01-1061 2016
- Smith , J.D. Gear Noise and Vibration CRC Press 2003
- Weber , C. 1949
- Sainsot , P. , Velex , P. , and Duverger , O. Contribution of Gear Body to Tooth Deflections - A New Bidimensional Analytical Formula ASME J.Mech. Des. 126 748 752 2004
- Yang , D.C.H. and Sun , Z.S. A Rotary Model for Spur Gear Dynamics Journal of Mechanisms, Transmissions, and Automation in Design 107 4 529 535 1985