This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modelling and Validation for an Electro-Hydraulic Braking System Equipped with the Electro-Mechanical Booster
Technical Paper
2018-01-0828
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The intelligent and electric vehicles are the future of vehicle technique. The development of intelligent and electric vehicles also promotes new requirements to many traditional chassis subsystems, including traditional braking system equipped with vacuum boosters. The Electro-Mechanical Booster is an applicable substitute of traditional vacuum booster for future intelligent and electric vehicles. It is independent of engine vacuum source, and can be combined with electric regenerative braking. A complete system model is necessary for system analysis and algorithm developing. For this purpose, the modeling of electro-hydraulic braking system is necessary.
In this paper, a detailed electro-hydraulic braking system model is studied. The system consists of an electro-mechanical booster and hydraulic braking system. The electro-mechanical booster which mainly contains a permanent magnet synchronous motor (PMSM) and a set of transmission mechanism is the critical component. First, the electro-mechanical booster model and hydraulic braking system model are built. Then, based on experimental data, the electro-mechanical booster model and hydraulic braking system model are validated separately. Finally, the two models are integrated and validated. The results show that the integrate model built in this paper can be well fitted with the real system.
Recommended Content
Authors
Topic
Citation
Zhao, J., Huang, J., and Zhu, B., "Modelling and Validation for an Electro-Hydraulic Braking System Equipped with the Electro-Mechanical Booster," SAE Technical Paper 2018-01-0828, 2018, https://doi.org/10.4271/2018-01-0828.Also In
References
- Deng , W. Electrification and Intelligence-Technologies that Drive Future Vehicles Automotive Safety and Energy 1 3 179 189 2010
- Loyola , J. and Assadian , F. An Investigation Into New ABS Control Strategies SAE Int. J. Passeng. Cars - Mech. Syst. 9 2 869 876 2016 10.4271/2016-01-1639
- Park , M.-K. , Lee , S.-Y. , Kwon , C.-K. , and Kim , S.-W. Design of Pedestrian Target Selection with Funnel Map for Pedestrian AEB System IEEE Transactions on Vehicular Technology 66 5 3597 3609 2017
- Gao , Z. , Yan , W. , and Li , H. Design of the Time-Gap-Dependent Robust Headway Control Algorithm for ACC Vehicles International Journal of Vehicle Design 70 4 325 340 2016
- Soga , M. , Shimada , M. , Sakamoto , J.-I. , and Otomo , A. Development of Vehicle Dynamics Management System for Hybrid Vehicles: ECB System for Improved Environmental and Vehicle Dynamic Performance JSAE Review 23 4 459 464 2002
- Petruccelli , L. , Velardocchia , M. , and Sorniotti , A. Electro-Hydraulic Braking System Modelling and Simulation SAE Technical Paper 2003-01-3336 2003 10.4271/2003-01-3336
- Chen , S. , Jun , W. , and Yi , L. Study on Brake Actuator of Electro-Mechanical Braking System Transactions of the Chinese Society for Agricultural Machinery 38 8 30 33 2007
- Xiang , W. , Richardson , P.C. , Zhao , C. , and Mohammad , S. Automobile Brake-by-Wire Control System Design and Analysis IEEE Transactions on Vehicular Technology 57 1 138 145 2008
- http://www.bosch.co.jp/en/press/group-1306-13.asp
- Leiber , H. and Leiber , T. 2013
- Ohtani , Y. , Innami , T. , Obata , T. , Yamaguchi , T. et al. Development of an Electrically-Driven Intelligent Brake Unit SAE Technical Paper 2011-01-0572 2011 10.4271/2011-01-0572
- Ohtani , Y. , Innami , T. , Obata , T. , Yamaguchi , T. et al. Development of an Electrically-Driven Intelligent Brake Unit SAE Technical Paper 2011-01-0572 2011 10.4271/2011-01-0572
- Fujiki N , Koike Y , Ito Y , Suzuki , G. et al. Development of an Electrically-Driven Intelligent Brake System for EV 1st International Electric Vehicle Technology Conference 2011
- Wu , X. , Wang , H. , Yuan , X. , Huang , S. et al. Design and Implementation of Recursive Model Predictive Control for Permanent Magnet Synchronous Motor Drives Mathematical Problems in Engineering 2015
- Qingyang , X. , Zhang , C. , Li , Z. , and Wang , C. Multiobjective Optimization of PID Controller of PMSM Journal of Control Science and Engineering 2014