This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation of Dynamic Gas Cavity Effects of a Tire under Operational Conditions
Technical Paper
2018-01-0682
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The authors are responsible for the development of a structural 3D shell based bead-to-bead model with sidewalls and belt that separately models all functional layers of a modern tire [4]. In this model, the inflation pressure is modeled as a uniform stress acting normal to the shell’s inner face. The pressure can vary depending on the application: prescribed by the MBS-tool to align to a constant pressure specified for a vehicle or scenario, but it can also be modified dynamically to simulate e.g. a sudden pressure loss in a tire [1]. For many applications, this description of the inflation pressure as a time dependent quantity is sufficient. However, there are applications where it is needed to describe the inflation gas using a dynamic gas equation (Euler or Navier-Stokes). One such example is when the tire model is used in NVH (Noise-Vibration-Harshness) applications where the frequency range extends the 200 Hz range. For passenger car tires, a first mode of the inflation gas is at around 200-250. This mode couples with the tire structure and yields significant peaks in the spindle force spectrum, which have to be considered in the NVH assessment of a car. In this paper, we show the effect of modeling the inflation gas of a tire by an isentropic compressible Euler equation and couple it to the tire dynamics in the nonlinear transient application range. After motivation and validation of the overall model by comparison with respective measurements, we also describe how to derive a linear model from the overall transient tire model, that can then be used in linear FEM based NVH-tools. It can be observed that the tire rotation will yield a split in the cavity mode which increases with rotational velocity, an effect that can also be correctly predicted by the linearized model.
Recommended Content
Authors
Citation
Gallrein, A., Baecker, M., and Guan, J., "Simulation of Dynamic Gas Cavity Effects of a Tire under Operational Conditions," SAE Technical Paper 2018-01-0682, 2018, https://doi.org/10.4271/2018-01-0682.Also In
References
- Bäcker , M. , Gallrein , A. , Calabrese , F. , and Leister , G. SIMULATION-Simulation of a Tire Blow-Out in a Full Vehicle Scenario Pfeffer , P. Proceedings of the 7th International Munich Chassis Symposium 2016 Springer Vieweg Wiesbaden 2017 https://doi.org/10.1007/978-3-658-14219-3_55
- Baecker , M. and Gallrein , A. Noise, Vibration, Harshness Model of a Rotating Tyre Vehicle System Dynamics 54 4 474 491 2016 10.1080/00423114.2016.1158844
- Baecker , M. , Gallrein , A. , and Roller , M. From Road Excitation to Spindle Forces in Frequency Domain: Linearization of the Rolling Tire SAE Technical Paper 2015-01-0625 2015 10.4271/2015-01-0625
- Gallrein , A. , Baecker , M. , and Gizatullin , A. Structural MBD Tire Models: Closing the Gap to Structural Analysis - History and Future of Parameter Identification SAE Technical Paper 2013-01-0630 2013 10.4271/2013-01-0630
- Bourdarias , C. and Gerbi , S. A Conservative Model for Unsteady Flows in Deformable Closed Pipes and its Implicit Second-Order Finite Volume Discretisation Computers & Fluids 37 10 1225 1237 2008 https://doi.org/10.1016/j.compfluid.2007.09.007
- Brinkmeier , M. and Nackenhorst , U. An Approach for Large-Scale Gyroscopic Eigenvalue Problems with Application to High-Frequency Response of Rolling Tires Comput. Mech. 41 4 503 515 2008 10.1007/s00466-007-0206-6
- Lopez , I. , Blom , R. , Roozen , N. , and Nijmeijer , H. Modelling Vibrations on Deformed Rolling Tires-A Modal Approach Journal of Sound and Vibration 307 3-5 481 494 10.1016/j.jsv.2007.05.056