Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Evaluation of Shot-to-Shot In-Nozzle Flow Variations in a Heavy-Duty Diesel Injector Using Real Nozzle Geometry

Journal Article
2018-01-0303
ISSN: 1946-3952, e-ISSN: 1946-3960
DOI: https://doi.org/10.4271/2018-01-0303
Published April 03, 2018 by SAE International in United States
Evaluation of Shot-to-Shot In-Nozzle Flow Variations in a Heavy-Duty Diesel Injector Using Real Nozzle Geometry
Citation: Torelli, R., Matusik, K., Nelli, K., Kastengren, A. et al., "Evaluation of Shot-to-Shot In-Nozzle Flow Variations in a Heavy-Duty Diesel Injector Using Real Nozzle Geometry," SAE Int. J. Fuels Lubr. 11(4):379-295, 2018, https://doi.org/10.4271/2018-01-0303.
Language: English

References

  1. US Energy Information Administration International Energy Outlook 2017, DOE/EIA-0484 (2017) 2017 www.eia.gov/outlooks/ieo/pdf/0484(2017).pdf
  2. ExxonMobil 2017 Outlook for Energy: A View to 2040 2017 www.cdn.exxonmobil.com/~/media/global/files/outlook-for-energy/2017/2017-outlook-for-energy.pdf
  3. World Energy Council Global Transport Scenarios 2050 2012 www.worldenergy.org/wp-content/uploads/2012/09/wec_transport_scenarios_2050.pdf
  4. Manente , V. , Johansson , B. , and Tunestal , P. Partially Premixed Combustion at High Load Using Gasoline and Ethanol, a Comparison with Diesel SAE Technical Paper 2009-01-0944 2009 10.4271/2009-01-0944
  5. Hanson , R. , Splitter , D. , and Reitz , R. Operating a Heavy-Duty Direct-Injection Compression-Ignition Engine with Gasoline for Low Emissions SAE Technical Paper 2009-01-1442 2009 10.4271/2009-01-1442
  6. Das Adhikary , B. , Reitz , R. , and Ciatti , S.A. Study of In-Cylinder Combustion and Multi-Cylinder Light Duty Compression Ignition Engine Performance Using Different RON Fuels at Light Load Conditions SAE Technical Paper 2013-01-0900 2013 10.4271/2013-01-0900
  7. Kolodziej , C.P. , Kodavasal , J. , Ciatti , S.A. , Som , S. et al. Achieving Stable Engine Operation of Gasoline Compression Ignition Using 87 AKI Gasoline down to Idle SAE Technical Paper 2015-01-0832 2015 10.4271/2015-01-0832
  8. Zhang , Y. , Voice , A. , Tzanetakis , T. , Traver , M. et al. An Evaluation of Combustion and Emissions Performance with Low Cetane Naphtha Fuels in a Multicylinder Heavy-Duty Diesel Engine Journal of Engineering for Gas Turbines and Power 138 102805 2016 10.1115/1.4032879
  9. Zhang , Y. , Kumar , P. , Traver , M. , and Cleary , D. Conventional and Low Temperature Combustion Using Naphtha Fuels in a Multi-Cylinder Heavy-Duty Diesel Engine SAE Int. J. Engines 9 2 1021 1035 2016 10.4271/2016-01-0764
  10. Torelli , R. , Som , S. , Pei , Y. , Zhang , Y. et al. Comparison of In-Nozzle Flow Characteristics of Naphtha and N-Dodecane Fuels SAE Technical Paper 2017-01-0853 2017 10.4271/2017-01-0853
  11. Torelli , R. , Som , S. , Pei , Y. , Zhang , Y. et al. Influence of Fuel Properties on Internal Nozzle Flow Development in a Multi-Hole Diesel Injector Fuel 204 171 184 2017 10.1016/j.fuel.2017.04.123
  12. Torelli , R. , Som , S. , Pei , Y. , Zhang , Y. et al. Internal Nozzle Flow Simulations of Gasoline-like Fuels under Diesel Operating Conditions ILASS Americas, 29th Annual Conference on Liquid Atomization and Spray Systems Atlanta, GA 2017 http://www.ilass.org/2/conferencepapers/053_2017.pdf
  13. Battistoni , M. , Xue , Q. , Som , S. , and Pomraning , E. Effect of Off-Axis Needle Motion on Internal Nozzle and near Exit Flow in a Multi-Hole Diesel Injector SAE Int. J. Fuels Lubr. 7 1 167 182 2014 10.4271/2014-01-1426
  14. Habchi , C. , Gillet , N. , Velghe , A. , Bohbot , J. et al. On the Role of Cavitation in Marine Large Diesel Injector: Numerical Investigation of Nozzle Orifices Eccentricity ILASS-Europe 2014, 26th Annual Conference on Liquid Atomization and Spray Systems Bremen, Germany 2014 www.ilasseurope.org/ICLASS/ilass2011/cd ilass2011_4.zip
  15. Pierpont , D.A. and Reitz , R.D. Effects of Injection Pressure and Nozzle Geometry on D.I. Diesel Emissions and Performance SAE Technical Paper 950604 1995 10.4271/950604
  16. Kastengren , A.L. , Powell , C.F. , Liu , Z. , Fezzaa , K. et al. High-Speed X-Ray Imaging of Diesel Injector Motion Proceedings of the ASME Internal Combustion Engine Division Spring Technical Conference 2009 10.1115/ICES2009-76032
  17. Powell , C.F. , Kastengren , A.L. , Liu , Z. , and Fezzaa , K. The Effects of Diesel Injector Needle Motion on Spray Structure J. Eng. Gas Turbines Power 133 1 012802 2010 10.1115/1.4001073
  18. Kastengren , A.L. , Tilocco , F.Z. , Powell , C.F. , and Fezzaa , K. Initial Evaluation of Engine Combustion Network Injectors with X-Ray Diagnostics ILASS Americas, 23rd Annual Conference on Liquid Atomization and Spray Systems Ventura, CA 2011 http://www.ilass.org/2/conferencepapers/ILASS2011-100.PDF
  19. Kastengren , A.L. , Tilocco , F.Z. , Powell , C.F. , Manin , J. et al. Engine Combustion Network (ECN): Measurements of Nozzle Geometry and Hydraulic Behavior Atomization and Sprays 22 12 1011 1052 2013 10.1615/AtomizSpr.2013006309
  20. Swantek , A. , Kastengren , A.L. , Duke , D. , Tilocco , Z. et al. Quantification of Shot-to-Shot Variation in Single Hole Diesel Injectors SAE Int. J. Fuels Lubr. 8 1 160 166 2015 10.4271/2015-01-0936
  21. Xue , Q. , Battistoni , M. , Som , S. , Quan , S. et al. Eulerian CFD Modeling of Coupled Nozzle Flow and Spray with Validation against X-Ray Radiography Data SAE Int. J. Engines 7 2 1061 1072 2014 10.4271/2014-01-1425
  22. Chiatti , G. , Chiavola , O. , Frezzolini , P. , and Palmieri , F. On the Link between Diesel Spray Asymmetry and Off-Axis Needle Displacement Applied Sciences 7 4 375 2017 10.3390/app7040375
  23. Papadopoulos , N. and Aleiferis , P. Numerical Modelling of the In-Nozzle Flow of a Diesel Injector with Moving Needle during and after the End of a Full Injection Event SAE Int. J. Eng. 8 5 2285 2302 10.4271/2015-24-2472
  24. Ghiji , M. , Goldsworthy , L. , Brandner , P.A. , Garaniya , V. et al. Analysis of Diesel Spray Dynamics Using a Compressible Eulerian/VOF/LES Model and Microscopic Shadowgraphy Fuel 188 352 366 2017 10.1016/j.fuel.2016.10.041
  25. Xue , F. , Luo , F. , Cui , H. , Moro , A. et al. Numerical Analyses of Transient Flow Characteristics within each Nozzle Hole of an Asymmetric Diesel Injector Int. J. Heat Mass Transf. 104 18 27 2017 10.1016/j.ijheatmass transfer.2016.08.027
  26. Salvador Rubio , F.J. , Martínez Lopez , J.E. , Romero Bauset , J.V. , and Roselló Ferragud , M.D. Study of the Influence of the Needle Eccentricity on the Internal Flow in Diesel Injector Nozzles by Computational Fluid Dynamics Calculations International Journal of Computer Mathematics 91 1 24 31 2014 10.1080/00207160.2013.770483
  27. Moro , A. , Zhou , Q. , Xue , F. , and Luo , F. Comparative Study of Flow Characteristics within Asymmetric Multi Hole VCO and SAC Nozzles Energy Conversion and Management 132 482 493 2017 10.1016/j.enconman.2016.11.048
  28. Kastengren , A.L. , Powell , C.F. , Arms , D. , Dufresne , E.M. et al. The 7BM Beamline at the APS: A Facility for Time-Resolved Fluid Dynamics Measurements Journal of Synchrotron Radiation 19 654 657 2012 10.1107/S0909049512016883
  29. Gürsoy , D. , De Carlo , F. , Xiao , X. , and Jacobsen , C. TomoPy: A Framework for the Analysis of Synchrotron Tomographic Data Journal of Synchrotron Radiation 21 Pt. 5 1188 1193 2014 10.1107/S1600577514013939
  30. CIBC Seg3D: Volumetric Image Segmentation and Visualization 2016 http://www.seg3d.org
  31. Matusik , K.E. , Duke , D.J. , Kastengren , A.L. , Sovis , N. et al. International Journal of Engine Research 2017 10.1177/1468087417736985
  32. Shen , Q. , Lee , W.-K. , Fezzaa , K. , Chu , Y.S. et al. Dedicated Full-Field X-Ray Imaging Beamline at Advanced Photon Source Nuclear Instruments and Methods in Physics Research - Section A 582 1 77 79 2007 10.1016/j.nima.2007.08.169
  33. Launder , B.E. and Sharma , B.I. Application of the Energy Dissipation Model of Turbulence to the Calculation of Flow near a Spinning Disc Letters in Heat and Mass Transfer 1 131 138 1974 10.1016/0094-4548(74)90150-7
  34. Richards , K.J. , Senecal , P.K. , and Pomraning , E. Converge Manual (Version 2.3) 2016 https://convergecfd.com
  35. Bilicki , Z. and Kestin , J. Physical Aspects of the Relaxation Model in Two-Phase Flow Proceedings of the Royal Society London A 428 379 397 1990 10.1098/rspa.l990.0040
  36. Zhao , H. , Quan , S. , Dai , M. , Pomraning , E. et al. Validation of a Three-Dimensional Internal Nozzle Flow Model Including Automatic Mesh Generation and Cavitation Effects Journal of Engineering for Gas Turbines and Power 136 092603 2014 10.1115/1.4027193
  37. Battistoni , M. , Som , S. , and Longman , D.E. Comparison of Mixture and Multifluid Models for In-Nozzle Cavitation-Prediction Journal of Engineering for Gas Turbines and Power 136 061506 2014 10.1115/1.4026369
  38. Winklhofer , E. , Kull , E. , Kelz , E. , and Morozov , A. Comprehensive Hydraulic and Flow Field Documentation in Model Throttle Experiments under Cavitation Conditions ILASS-Europe Zurich 2001
  39. Duke , D. J. , Kastengren , A. L. , Tilocco , F. Z. , and Powell , C. F. Synchrotron X-Ray Measurements of Cavitation Proceedings of ILASS Americas 2013 Pittsburgh, PA www.ilass.org/2/conferencepapers/8_2013.pdf
  40. Payri , R. , Gil , A. , Plazas , A.H. , and Giménez , B. Influence of Nozzle Seat Type on Internal Nozzle of Convergent Nozzles SAE Technical Paper 2004-01-2010 2004 10.4271/2004-01-2010
  41. Benajes , J. , Pastor , J.V. , Payri , R. , and Plazas , A.H. Analysis of the Influence of Diesel Nozzle Geometry in the Injection Rate Characteristic Journal of Fluids Engineering 126 1 63 71 2004 10.1115/1.1637636
  42. Saha , K. , Som , S. , Battistoni , M. , Li , Y. et al. Numerical Investigation of Two-Phase Flow Evolution of In- and Near-Nozzle Regions of a Gasoline Direct Injection Engine during Needle Transients SAE Int. J. Fuels Lubr. 9 2 1230 1240 2016 10.4271/2016-01-0870
  43. Saha , K. , Som , S. , Battistoni , M. , Li , Y. et al. Numerical Simulation of Internal and Near-Nozzle Flow of a Gasoline Direct Injection Fuel Injector Journal of Physics: Conference Series 656 012100 2015 10.1088/1742-6596/656/1/012100
  44. Moulai , M. , Grover , R.O. , Parrish , S.E. , and Schmidt , D.P. Internal and Near-Nozzle Flow in a Multi-Hole Gasoline Injector under Flashing and Non-Flashing Conditions SAE Technical Paper 2015-01-0944 2015 10.4271/2015-01-0944
  45. Baldwin , E.T. , Grover , R.O. , Duke , D.J. , Matusik , K.E. et al. String Flash-Boiling in Flashing and Non-Flashing Gasoline Direction Injection Simulations with Transient Needle Motion Proceedings of ILASS Americas Dearborn, MI 2016 www.ilass.org/2/conferencepapers/16_2016.pdf
  46. Schaschke , C. , Fletcher , I. , and Glen , N. Density and Viscosity Measurement of Diesel Fuels at Combined High Pressure and Elevated Temperature Processes 1 2 30 48 2013 10.3390/pr1020030

Cited By

Recommended Content

Technical Paper Numerical Investigation on the Needle-shape of Hollow-Cone Pressure-Swirl Type Gasoline Direct Injector
Technical Paper Effects of Hole Diameter and Injection Pressure on Fuel Spray and Its Evaporation Characteristics of Multi-Hole Nozzle for Diesel Engine
Technical Paper Transient Internal Nozzle Flow in Transparent Multi-Hole Diesel Injector