This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Representation of Two-Stroke Engine Scavenging in 1D Models Using 3D Simulations
Technical Paper
2018-01-0166
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The paper proposes the way of using scavenging curves, i.e., dependence of residual gas fraction in exhaust port or valve on residual fraction in a cylinder, found by CFD simulations. In the general case, exhaust gas recirculation outside of a cylinder (EGR) or internal gas recirculation caused by variable values of burned gas backflow to inlet system may influence in-cylinder residual gas fraction. These deviations may take place during engine optimization, done by 1D models. The determination of scavenging curves via 3D CFD simulations is a time consuming process, which cannot be repeated for every 1D case.
The way of generalization of scavenging curves is based on reduction of cylinder burned gas contents (cylinder residual ratio) to scavenging progress variable, and reduction of burned gas contents in exhaust port gas flow (exhaust residual ratio), which makes the use of single result of 3D simulation possible for more variants of inlet timing or different pressure drop between inlet and exhaust system. The reduction is based on a stepwise integrated burned gas contents in fresh charge for every 1D simulated case. By this way, the procedure developed accelerates the optimization process substantially. The important condition is compatibility between 1D and 3D boundary conditions. The results are validated using dedicated 3D simulations.
Recommended Content
Authors
Citation
Brynych, P., Macek, J., Novella, R., and Thein, K., "Representation of Two-Stroke Engine Scavenging in 1D Models Using 3D Simulations," SAE Technical Paper 2018-01-0166, 2018, https://doi.org/10.4271/2018-01-0166.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- Gamma Technologies 2010
- Schmidt , S. , Schoegl , O. , Rothbauer , R.J. , Eichlseder , H. et al. An Integrated 3D CFD Simulation Methodology for the Optimization of the Mixture Preparation of 2-Stroke DI Engines SAE Technical Paper 2007-32-0029 2007
- Rothbauer , R.J. , Almbauer , R.A. , Schmidt , S.P. , Margelik , R.H. et al. A Multidimensional Interface for the Predictive CFD Simulation of the 2-Stroke Engine SAE Technical Paper 2006-32-0059 2006 10.4271/2006-32-0059
- Rinaldini , C.A. , Mattarelli , E. , and Golovitchev , V. CFD Analyses on 2-Stroke High Speed Diesel Engines SAE Int. J. Engines 7 4 2240 2256 2011 10.4271/2014-01-9051
- Sher , E. Scavenging Models for Numerical Simulations of Two-Stroke Engines: A Comparative Study IMechE 1991 Israel
- Sher , E. Scavenging the Two-Stroke Engine Great Britain Pergamon Press Plc 1989
- Dang , D. and Wallace , F.J. Some Single Zone Scavenging Models for Two-Stroke Engines Great Britain Pergamon Press Ltd. 1992
- Haider , S. , Meyer , K.E. , Schramm , J. , and Mayer , S. PIV Study of the Effect of Piston Motion on the Confined Swirling Flow in the Scavenging Process in 2-Stroke Marine Diesel Engines CIMAC Congress 2010 Bergen
- Trescher , D. Development of an Efficient 3-D CFD Software to Simulate and Visualize the Scavenging of a Two-Stroke Engine CIMNE 2007 Spain
- Abthoff , J. , Duvinage , F. , Hardt , T. , Kramer , M. et al. The 2-Stroke DI-Diesel Engine with Common Rail Injection for Passenger Car Application SAE Technical Paper 981032 1998 10.4271/981032
- Cernik , F. Integrated 1D Simulation for a Large Low-Speed 2-Stroke Marine Engine Proceedings GT-Suite Users Conference 2015
- Halamek , M. 2014
- Mattarelli , E. et al. Scavenge Ports Optimization of a 2-Stroke Opposed Piston Diesel Engine SAE Technical Paper 2017-24-0167 2017
- Ma , J. , Zhao , H. , Freeland , P. , Hawley , M. et al. Numerical Analysis of a Downsized 2-Stroke Uniflow Engine SAE Int. J. Engines 7 4 2035 2044 2014
- Wang , X. , Ma , J. , and Zhao , H. Evaluations of Scavenge Port Designs for a Boosted Uniflow Scavenged Direct Injection Gasoline (BUSDIG) Engine by 3D CFD Simulations SAE Technical Paper 2016-01-1049 2016 10.4271/2016-01-1049
- Payri , F. , Galindo , J. , Climent , H. , Pastor , J.M. et al. Optimisation of the Scavenging and Injection Processes of an Air-Assisted Direct Fuel Injection 50 cc. 2-Stroke SI Engine by Means of Modelling SAE Technical Paper 2001-01-1814 2001 10.4271/2001-01-1814
- Mattarelli , E. , Fontanesi , S. , Gagliardi , V. , and Malaguti , S. Multidimensional Cycle Analysis on a Novel 2-Stroke HSDI Diesel Engine SAE Technical Paper 2007-01-0161 2007 10.4271/2007-01-0161
- Cantore , G. and Mattarelli , E. A New Concept for Ultra-Compact Automotive HSDI Diesel Engines SAE Technical Paper 2007-01-1253 2007 10.4271/2007-01-1253
- Heywood , J. B. , Sher , E. The Two - Stroke Cycle Engine: Its Development, Operation and Design USA Taylor & Francis 1999 1-56032-831-2
- De Marco , C.A. , Mattarelli , E. , Paltrinieri , F. , and Rinaldini , C.A. A New Combustion System for 2-Stroke HSDI Diesel Engines SAE Technical Paper 2007-01-1255 2007 10.4271/2007-01-1255
- Pohořelský , L. , Brynych , P. , Macek , J. Air System Conception for a Downsized Two-Stroke Diesel Engine SAE Technical Paper 2012-01-0831 2012 10.4271/2012-01-0831
- Schweitzer , P.H. Scavenging of Two-Stroke Cycle Diesel Engines New York Macmillan Company 1949
- Yakhot , V. and Orszag , S.A. Renormalization Group Analysis of Turbulence, I. Basic Theory Journal of Scientific Computing 1 1 3 51 1986
- Angelberger , C. , Poinsot , T. , and Delhay , B. Improving Near-Wall Combustion and Wall Heat Transfer Modeling in SI Engine Computations SAE Technical Paper 972881 1997 10.4271/972881