This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
1D Engine Simulation Approach for Optimizing Engine and Exhaust Aftertreatment Thermal Management for Passenger Car Diesel Engines by Means of Variable Valve Train (VVT) Applications
Technical Paper
2018-01-0163
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Using a holistic 1D engine simulation approach for the modelling of full-transient engine operation, allows analyzing future engine concepts, including its exhaust gas aftertreatment technology, early in the development process. Thus, this approach enables the investigation of both important fields - the thermodynamic engine process and the aftertreatment system, together with their interaction in a single simulation environment. Regarding the aftertreatment system, the kinetic reaction behavior of state-of-the-art and advanced components, such as Diesel Oxidation Catalysts (DOC) or Selective Catalytic Reduction Soot Filters (SCRF), is being modelled.
Furthermore, the authors present the use of the 1D engine and exhaust gas aftertreatment model on use cases of variable valve train (VVT) applications on passenger car (PC) diesel engines. The VVT applications consider a wide range of variables such as exhaust cam phasing, late intake valve opening, Miller, 2nd exhaust event and cylinder deactivation. The model has been validated with the results of experimental investigations to do this in a first step. Secondly, the VVT applications are implemented to the model to analyze their heating potential according to an efficient engine and exhaust gas thermal management. Various heating strategies have been investigated for a full-size vehicle within extended engine speed and load ranges which are relevant for the Worldwide Harmonized Light Vehicles Test Cycle (WLTC) and even more for the determination of Real Driving Emissions (RDE). The results are compared to a conventional heating measure to demonstrate the potential in terms of a faster aftertreatment light-off with increased conversion efficiencies and benefits in CO2 emissions. As conclusion out of the investigations it can be seen, that a cylinder deactivation or a second exhaust event could provide up to 5-10% CO2 reduction under RDE conditions that comply with the EU6d legislation limit.
Recommended Content
Authors
Topic
Citation
Deppenkemper, K., Özyalcin, C., Ehrly, M., Schoenen, M. et al., "1D Engine Simulation Approach for Optimizing Engine and Exhaust Aftertreatment Thermal Management for Passenger Car Diesel Engines by Means of Variable Valve Train (VVT) Applications," SAE Technical Paper 2018-01-0163, 2018, https://doi.org/10.4271/2018-01-0163.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Wahiduzzaman , S. , Wenzel , S. , Despujols , B. , and Tang , W. Development of Diesel Engine and Catalyst Model Derived from Detailed Model for Engine and Powertrain Control Design International Conference and Exhibition 2008
- Pautasso , E. , Servetto , E. , Artukovic , D. , Brown , J. et al. Emissions and Fuel Consumption Trade-Offs of a Turbocharged Diesel Engine Equipped with Electrically Heated Catalyst International Conference and Exhibition Diesel Powertrain 2012
- Tang , W. , Wahiduzzaman , S. , Wenzel , S. , Leonard , A. et al. Development of a Quasi-Steady Approach Based Simulation Tool for System Level Exhaust Aftertreatment Modeling SAE International, 2008-01-0866 2008 10.4271/2008-01-0866
- Gamma Technologies 2017
- Balazs , A. 2015
- Adolph , D. , Busch , H. , Pischinger , S. , Kolbeck , A. et al. 2008
- Holderbaum , B. X 2009
- Körfer , Th. , Schnorbus , Th. , Kalenborn , M. , Kolbeck , A. et al. Integrated Diesel Engine Concept for Lowest CO 2 Emission Requirements 19th Aachen Colloquium Automobile and Engine Technology 2010 Aachen 2010
- Pischinger , S. , Honardar , S. , and Deppenkemper , K. 2013
- Kopp , Ch. 2006
- Schutting , E. , Neureiter , A. , Fuchs , C. , Schatzberger , T. et al. Miller- und Atkinson-Zyklus am aufgeladenen Dieselmotor MTZ 68 2007
- 2016