This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Extraction and Characterization of Microfibers Obtained from Banana Waste
ISSN: 0148-7191, e-ISSN: 2688-3627
Published July 10, 2017 by SAE International in United States
This content contains downloadable datasetsAnnotation ability available
Event: International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility
The main objective is to Extraction of cellulose fibers using mechanical ball milling process and chemical treatment methods. The fibers are incorporated with an epoxy matrix to make composite plates. Mechanical properties such as tensile strength, flexural strength, and impact energy are evaluated. Ball milling is the mechanical extraction method of producing nano size powder. The increase in milling process results in the chance of occurring nanofibers. The ball milling process is carried out without any chemical treatment process. In chemical treatment methods, three different kinds of treatment are performed namely sodium hypochlorite, sulphuric acid and acetic acid. Using hand layup methods these fibers are incorporated into the epoxy matrix to fabricate composite plates. In my study nanosized fiber is not obtained, only 28 micron fibers are converted into 3-4 microns. Mechanical properties show that chemically treated sodium hypochlorite samples give better mechanical properties. Experimental and theoretical tensile strength is examined using different theory models. The result depicts that Hirsch model is far from experimental value. The future work is to treat the fiber with different proportion of chemical. A hybrid composite is prepared with varying the volume fraction of fiber. Free vibration test should be conducted on hybrid composites.
CitationK, V., Murugadoss, P., and Gokul, K., "Extraction and Characterization of Microfibers Obtained from Banana Waste," SAE Technical Paper 2017-28-1987, 2017, https://doi.org/10.4271/2017-28-1987.
Data Sets - Support Documents
|[Unnamed Dataset 1]|
- Elanthikkal, Silviya, Unnikrishnan Gopalakrishnapanicker, Soney Varghese, and Guthrie James T.. "Cellulose microfibres produced from banana plant wastes: Isolation and characterization." Carbohydrate Polymers 80, no. 3 (2010): 852-859.
- Khalil, HPS Abdul, Bhat A. H., and Yusra AF Ireana. "Green composites from sustainable cellulose nanofibrils: a review." Carbohydrate Polymers87.2 (2012): 963-979.
- Dong, Hong, Strawhecker Kenneth E., Snyder James F., Orlicki Joshua A., Reiner Richard S., and Rudie Alan W.. "Cellulose nanocrystals as a reinforcing material for electrospun poly (methyl methacrylate) fibers: Formation, properties and nanomechanical characterization." Carbohydrate Polymers 87, no. 4 (2012): 2488-2495.
- Sheltami, Rasha M., Ibrahim Abdullah, Ishak Ahmad, Alain Dufresne, and Hanieh Kargarzadeh. "Extraction of cellulose nanocrystals from mengkuang leaves (Pandanus tectorius)." Carbohydrate Polymers 88, no. 2 (2012): 772-779.
- Kargarzadeh, Hanieh, Ishak Ahmad, Ibrahim Abdullah, Alain Dufresne, Zainudin Siti Yasmine, and Sheltami Rasha M.. "Effects of hydrolysis conditions on the morphology, crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibers." Cellulose 19, no. 3 (2012): 855-866.
- Johar, Nurain, Ishak Ahmad, and Alain Dufresne. "Extraction, preparation and characterization of cellulose fibers and nanocrystals from rice husk."Industrial Crops and Products 37.1 (2012): 93-99.
- Jayabal, S., and Natarajan U.. "Influence of fiber parameters on tensile, flexural, and impact properties of nonwoven coir-polyester composites." The International Journal of Advanced Manufacturing Technology 54.5-8 (2011): 639-648.
- Saravanakumar, S. S., Kumaravel A., Nagarajan T., Sudhakar P., and Baskaran R.. "Characterization of a novel natural cellulosic fiber from Prosopis juliflora bark." Carbohydrate polymers 92, no. 2 (2013): 1928-1933.
- Rajasekaran, T., and Gokul K.. "Evaluation of mechanical characteristics of treated and untreated sugarcane fiber composites." Journal of chemical and Pharmaceutical Sciences 9.1 (2016) 652-656.
- Silvério, Hudson Alves, Flauzino Neto Wilson Pires, Dantas Noélio Oliveira, and Pasquini Daniel. "Extraction and characterization of cellulose nanocrystals from corncob for application as reinforcing agent in nanocomposites." Industrial Crops and Products 44 (2013): 427-436.
- Santos dos, Marcos Roni, Flauzino Neto Wilson Pires, Silvério Hudson Alves, Martins Douglas Ferreira, Dantas Noélio Oliveira, and Pasquini Daniel. "Cellulose nanocrystals from pineapple leaf, a new approach for the reuse of this agro-waste." Industrial Crops and Products 50 (2013): 707-714.
- Neto, Wilson Pires Flauzino, Silvério Hudson Alves, Dantas Noélio Oliveira, and Pasquini Daniel. "Extraction and characterization of cellulose nanocrystals from agro-industrial residue-soy hulls." Industrial Crops and Products 42 (2013): 480-488.
- Raghavendra, S., Lingaraju P., Balachandra Shetty, and Mukunda P. G.. "Mechanical properties of short banana fiber reinforced natural rubber composites." International Journal of Innovative Research in Science, Engineering and Technology 2, no. 5 (2013): 1653-1655.
- Tibolla, Heloisa, Pelissari Franciele Maria, and Menegalli Florencia Cecilia. "Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment." LWT-Food Science and Technology 59.2 (2014): 1311-1318.
- Padal, K. Ramji, and VVS Prasad K. T. B.. "Mechanical Properties of Jute Nanofibres Reinforced Composites." Global Journal of Research In Engineering 14.4 (2014).
- Lee, Koon-Yang, Yvonne Aitomäki, Berglund Lars A., Kristiina Oksman, and Alexander Bismarck. "On the use of nanocellulose as reinforcement in polymer matrix composites." Composites Science and Technology 105 (2014): 15-27.
- Lin, Ning, and Alain Dufresne. "Nanocellulose in biomedicine: current status and future prospect." European Polymer Journal 59 (2014): 302-325.
- Pentakota, Surya Nagendra, Prasad V. V. S., Ramji K., and Gangadhara Pusty. "Synthesis of bio-degradable banana nanofibers." IJITR 2, no. 1 (2014): 730-734.
- Palanivendhan, M., Yash Nigam, and Kshitij Trivedi. "Experimental evaluation of aluminium alloy reinforced with silicon carbide." International Journal of Applied Engineering Research 10.91: 2015.
- Umer, R., Li Y., Dong Yu, Haroosh H. J., and Liao K.. "The effect of graphene oxide (GO) nanoparticles on the processing of epoxy/glass fiber composites using resin infusion." The International Journal of Advanced Manufacturing Technology 81, no. 9-12 (2015): 2183-2192.
- Pickering, Kim L., and Le Tan Minh. "High performance aligned short natural fibre-Epoxy composites." Composites Part B: Engineering 85 (2016): 123-129.
- Krishna, K. Venkata, and Kanny K.. "The effect of treatment on kenaf fiber using green approach and their reinforced epoxy composites." Composites Part B: Engineering 104 (2016): 111-117.