This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Comparison of Eulerian and Lagrangian 1D Models of Diesel Fuel Injection and Combustion
Technical Paper
2017-24-0006
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Diesel engines are being more commonly used for light automotive applications, due to their higher efficiency, despite the difficulty of depollution and extra associated costs. They require more accessories to function properly, such as turbocharging and post-treatment systems. The most important pollutants emitted from diesel engines are NOx and particles (in conventional engines), being difficult to reduce and control because reducing one increases the other. Low temperature combustion (LTC) diesel engines are able to reduce both pollutants, but increase emissions of CO and HC. Besides HCCI and EGR systems, one method that could achieve LTC conditions is by using multiple injections (pilot/main, split injection, etc.). However, understanding multiple diesel injection is no easy task, so far done by trial and error and complex 3D CFD models, or too simplified by 0D models.
Therefore, a numerical 1D model is to be adapted to simulate multiple injection situations in a diesel engine. In this paper, existing models are compared to determine the necessary conditions to adapt the model to handle multiple diesel injections. The base model used is that of Ma et al, which is based on the eulerian model of Musculus and Kattke for inert diesel jets. One limitation found on this model was the simplification of the radial distribution of fuel/air mixture, which alters the values obtained from it.
This model is compared with a lagrangian model (Hiroyasu, Poetsch), which has an inherent 2D treatment of the diesel jet. A pseudo 2D radial distribution is calculated from the 1D model to create a 2D image of the jet, to be able to compare it to the 2D image obtained from the lagrangian model. Important differences are noted from both models, especially in the thermal dilatation due to the burning of fuel. Since the eulerian model has a fixed spreading angle for the jet, the thermal dilatation is only axial (such as described in Desantes et al.); while in the lagrangian model, since the penetration is fixed, the dilatation is only radial. This difference modifies the fuel/air mixture within the jet, resulting in different heat release traces for both models.
To reconcile this difference, a thermal dilatation model is introduced to consider both radial and axial dilatations, to approach a more appropriate fuel/air mixture that properly models the diesel combustion. This lays a first step to arrive to a properly adapted 1D model for multiple diesel injection.
Authors
Topic
Citation
Aljure, A., Tauzia, X., and Maiboom, A., "Comparison of Eulerian and Lagrangian 1D Models of Diesel Fuel Injection and Combustion," SAE Technical Paper 2017-24-0006, 2017, https://doi.org/10.4271/2017-24-0006.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Heywood J. B. , Heywood J.B. Internal Combustion Engine Fundamentals New York McGraw-Hill Book Company 1988
- Dec , J. A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging* SAE Technical Paper 970873 1997 10.4271/970873
- Dec , J. , Sjöberg , M. , Hwang , W. , Davisson , M. et al. Detailed HCCI Exhaust Speciation and the Sources of Hydrocarbon and Oxygenated Hydrocarbon Emissions SAE Int. J. Fuels Lubr. 1 1 50 67 2009 10.4271/2008-01-0053
- de Ojeda W. , Zoldak P. , Espinosa R. et Kumar R. Development of a Fuel Injection Strategy for Diesel LTC SAE Technical Paper 2008-01-0057 2008
- Badami M. , Mallamo F. , Millo F. et Rossi E. E. Experimental investigation on the effect of multiple injection strategies on emissions, noise and brake specific fuel consumption of an automotive direct injection common-rail diesel engine Int. J. Engine Res Vol. 4 No. 4 2003
- Abramovich G. N. The theory of Turbulent Jets Massachusetts Institute of Technology 1963
- Hiroyasu H. et Arai M. Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions JSME Vol 26 No 214 April 1983
- Naber , J. and Siebers , D. Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays SAE Technical Paper 960034 1996 10.4271/960034
- Desantes J. M. , Pastor J. V. et García-Oliver J. M. A 1D model for the description of mixing-controlled reacting diesel sprays Combust Flame 156 234 249 2009
- Engine Combustion Network ECN Data Search 22 September 2016 https://ecn.sandia.gov/ecn-data-search/ February 2017
- Ma G. Modélisation 1D De La Combustion Diesel - Application A Un Moteur Automobile Thèse de Doctorat Laboratoire de Recherche en Hydrodynamique Énergétique et Environnement Atmosphérique (LHEEA) Ecole Centrale de Nantes 2013
- Ma G. , Tauzia X. et Maiboom A. One-dimensional combustion model with detailed chemistry for transient diesel sprays Proc IMechE Part D: J Automobile Engineering Vol. 228 ( 4 ) 457 476 2014
- Tauzia , X. , Maiboom , A. , and Ma , G. A 1D Model for Diesel Sprays under Reacting Conditions SAE Technical Paper 2015-24-2395 2015 10.4271/2015-24-2395
- Musculus , M. and Kattke , K. Entrainment Waves in Diesel Jets SAE Int. J. Engines 2 1 1170 1193 2009 10.4271/2009-01-1355
- Pastor J. V. , López J. J. , García J. M. et Pastor J. M. A 1D model for the description of mixing-controlled inert diesel sprays Fuel 87 2871 2885 2008
- Tap F. A. , Hilbert R. , Thévenin D. et Veynante D. A Generalized Flame Surface Density Modelling Approach for the Auto-Ignition of a Turbulent Non-Premixed System Combustion Theory Modelling Vol. 8 165 193 2004
- Darabiha N. , Esposito E. , Lacas F. et Veynante D. Combustion (cours) 2.2 Ecole Centrale de Paris 2006
- Kee R. J. , Rupley F. M. et Miller J. A. CHEMKIN-II: A FORTRAN chemical kinetics package for the analysis of gas phase chemical kinetics Livermore, California, USA Sandia National Laboratories Report SAND89-8009B UC-706 1989
- Poetsch , C. , Ofner , H. , and Schutting , E. Assessment of a Multi Zone Combustion Model for Analysis and Prediction of CI Engine Combustion and Emissions SAE Technical Paper 2011-01-1439 2011 10.4271/2011-01-1439
- Haas S. F. Experimentelle und theoretische Untersuchung homogener und teilhomogener Dieselbrennverfahren Institut für Verbrennungmotoren und Kraftfahrwesen der Universität Stuttgart 2007
- Jung , D. and Assanis , D. Multi-Zone DI Diesel Spray Combustion Model for Cycle Simulation Studies of Engine Performance and Emissions SAE Technical Paper 2001-01-1246 2001 10.4271/2001-01-1246
- Engine Combustion Network Combustion Vessel Geometry 2016 https://ecn.sandia.gov/diesel-spray-combustion/sandia-cv/combustion-vessel-geomertry/ February 2017
- Engine Combustion Network Injector Characterization 2016 https://ecn.sandia.gov/diesel-spray-combustion/sandia-cv/injector-characterization/2007-to-present/ February 2017
- Engine Combustion Network High-speed movies at Spray A conditions with 0% ambient oxygen and > 4.0 ms injection duration 2016 https://ecn.sandia.gov/data/bkldaal4movie/ February 2017
- Engine Combustion Network High-speed movies at Spray A conditions with 15% ambient oxygen and 6.0 ms injection duration. Injector 210677 2016 https://ecn.sandia.gov/data/jkldaal4movie/ February 2017
- Payri R. , García-Oliver J. M. , Xuan T. et Bardi M. A study on diesel spray tip penetration and radial expansion under reacting conditions Applied Thermal Engineering 90 619 629 2015
- Engine Combustion Network Readme, description of data set 2016 https://ecn.sandia.gov/cvdata/assets/datafiles/readme/jkldaAL4-notes.txt February 2017
- Pickett , L. , Genzale , C. , Bruneaux , G. , Malbec , L. et al. Comparison of Diesel Spray Combustion in Different High-Temperature, High-Pressure Facilities SAE Int. J. Engines 3 2 156 181 2010 10.4271/2010-01-2106