Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Parametric Study of Automotive Rear End Geometries on Rear Soiling

Journal Article
2017-01-1511
ISSN: 1946-3995, e-ISSN: 1946-4002
DOI: https://doi.org/10.4271/2017-01-1511
Published March 28, 2017 by SAE International in United States
A Parametric Study of Automotive Rear End Geometries on Rear Soiling
Sector:
Citation: Kabanovs, A., Hodgson, G., Garmory, A., Passmore, M. et al., "A Parametric Study of Automotive Rear End Geometries on Rear Soiling," SAE Int. J. Passeng. Cars - Mech. Syst. 10(2):553-562, 2017, https://doi.org/10.4271/2017-01-1511.
Language: English

References

  1. Hagemeier T. , Hartmann M. , and Thevenin D. Practice of vehicle soiling investigations: A review International Journal of Multiphase flow 37 8 860 875 2011
  2. Maycock G. The problem of water thrown up by vehicles on wet roads Road Research Laboratory Report No.4, Harmondsworth Harmondsworth 1966
  3. Gaylard , A. and Duncan , B. Simulation of Rear Glass and Body Side Vehicle Soiling by Road Sprays SAE Int. J. Passeng. Cars - Mech. Syst. 4 1 184 196 2011 10.4271/2011-01-0173
  4. Watkins S. Spray from Commercial Vehicles: A Method of Evaluation and Results from Road Tests Browand F. , McCallen R. , and Ross J. The Aerodynamics of Heavy Vehicles II; Trucks, Buses, and Trains 387 402 Springer Berlin Heidelberg 2009
  5. Manser M. , Koppa R. , and Mousley P. Evaluation of Splash and Spray Suppression Devices on Large Trucks DuringWetWeather AAA Foundation for Traffic Safety 1 56 2003
  6. Jilesen , J. , Gaylard , A. , Duncan , B. , Konstantinov , A. et al. Simulation of Rear and Body Side Vehicle Soiling by Road Sprays Using Transient Particle Tracking SAE Int. J. Passeng. Cars - Mech. Syst. 6 1 424 435 2013 10.4271/2013-01-1256
  7. Gaylard , A. , Pitman , J. , Jilesen , J. , Gagliardi , A. et al. Insights into Rear Surface Contamination Using Simulation of Road Spray and Aerodynamics SAE Int. J. Passeng. Cars - Mech. Syst. 7 2 673 681 2014 10.4271/2014-01-0610
  8. Gaylard , A. and Duncan , B. Simulation of Rear Glass and Body Side Vehicle Soiling by Road Sprays SAE Int. J. Passeng. Cars - Mech. Syst. 4 1 184 196 2011 10.4271/2011-01-0173
  9. Kabanovs , A. , Varney , M. , Garmory , A. , Passmore , M. et al. Experimental and Computational Study of Vehicle Surface Contamination on a Generic Bluff Body SAE Technical Paper 2016-01-1604 2016 10.4271/2016-01-1604
  10. Kuthada T. and Cyr s. Approaches to Vehicle Soiling Progress in Vehicle Aerodynamics, Numerical methods Renningen Expert-Verlag IV 111 123 2006
  11. Perry , A. , Passmore , M. , and Finney , A. Influence of Short Rear End tapers on the Base Pressure of a Simplified Vehicle SAE Int. J. Passeng. Cars - Mech. Syst. 8 1 317 327 2015 10.4271/2015-01-1560
  12. Johl , G. , Passmore , M.A. and R , P.M. 2004 Design methodology and performance of an indraft wind tunnel The Aeronautical Journal 108 1087 465 473
  13. Littlewood , R. and Passmore , M. The Optimization of Roof Trailing Edge Geometry of a Simple Square-Back SAE Technical Paper 2010-01-0510 2010 10.4271/2010-01-0510
  14. Cooper , K.R. Closed-test-section Wind Tunnel Blockage Corrections for Road Vehicles. Special Publication SAE SP1176 Society of Automotive Engineers, SAE 1996
  15. Wood , A. , Passmore , M. , Forbes , D. , Wood , D. et al. Base Pressure and Flow-Field Measurements on a Generic SUV Model SAE Int. J. Passeng. Cars - Mech. Syst. 8 1 233 241 2015 10.4271/2015-01-1546
  16. Jiang C. , Parker M. C. , Spencer A. , Wigley G. , Garner C. P. , and Helie J. Droplet Size Development in a DISI Injector Fuel Spray International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics 2016
  17. Wigley , G. , Hargrave , G.K. and Heath , J. 1999 A high power, high resolution LDA/PDA system applied to gasoline direct injection sprays Particle & particle systems characterization 16 1 11 19
  18. Hagemeier T. , Hartmann M. , Kühle M. , Thévenin D. , and Zähringer K. Experimental characterization of thin films, droplets and rivulets using LED fluorescence Experiments in Fluids 52 2 361 374 2012
  19. Spalart P. R. , W.-Jou H. , Strelets M. , and A. S.R. Comments on the Feasibility of LES for Wings, and on a Hybrid RANS/LES Approach Advances in DNS/LES, First AFOSR Internations Conference on DNS/LES 1997
  20. Spalart P. R. , Deck S. , Shur M. L. , Squires K. D. , Strelets M. K. , and Travin a. A new version of detached-eddy simulation, resistant to ambiguous grid densities Theoretical and Computational Fluid Dynamics 20 3 181 195 2006
  21. Shur M. L. , Spalart P. R. , Strelets M. K. , and Travin A. K. A hybrid RANS-LES approach with delayed-DES and wall-modelled LES capabilities International Journal of Heat and Fluid Flow 29 6 1638 1649 2008
  22. Migdal D. and Agosta V. D. A Source Flow Model for Continuum Gas-Particle Flow Journal of Applied Mechanics 34 4 860 1967
  23. Schiller L. and Naumann A. Uber die grundlegenden berechnungen bei der schwerkraftaufbereitung Zeitung des vereins deutscher ingenieure 77 318 1933
  24. Saffman P. G. The lift on a small sphere in a slow shear flow Journal of Fluid Mechanics 22 02 385 1965
  25. Gosman A. D. and Ioannides E. Aspects of Computer Simulation of Liquid-Fueled Combustors Journal of Energy 7 6 482 490 10.2514/3.62687 1983
  26. Forbes D. , Page G. , Passmore M. , and Gaylard A. Computational study of wake structure and base pressure on a generic SUV model IMechE: The International Vehicle Aerodynamics Conference 2014
  27. Varney , M. , Passmore , M. , and Gaylard , A. The Effect of Passive Base Ventilation on the Aerodynamic Drag of a Generic SUV Vehicle SAE Int. J. Passeng. Cars – Mech. Syst. 10 1 345 357 2017 10.4271/2017-01-1548

Cited By

Recommended Content

Technical Paper Turbulence Modelling in CFD Simulation of ICE intake flows
Technical Paper Turbulence Modelling in CFD Simulation of ICE Intake Flows: The Discharge Coefficient Prediction
Technical Paper Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method