This content is not included in your SAE MOBILUS subscription, or you are not logged in.
After-Treatment Systems to Meet China NS VI, India BS VI Regulation Limits
ISSN: 0148-7191, e-ISSN: 2688-3627
Published March 28, 2017 by SAE International in United States
This content contains downloadable datasetsAnnotation ability available
Future emissions regulations proposed for the Asian automotive industry (BS VI regulations for India and NS VI regulations for China) are strict and similar to EU VI regulations. As a result, they will require both advanced NOx control as well as advanced Particulate Matter (PM) control. This will drive implementation of full Catalyzed Diesel Particulate Filter (cDPF) and simultaneous NOx control using Selective Catalytic Reduction (SCR) technologies. In this work, we present the performance of various Diesel Oxidation Catalyst (DOC), cDPF, SCR and Ammonia slip catalyst (ASC) systems utilizing the World Harmonized Transient Cycle (WHTC). Aftertreatment Systems (ATS) required for both active and passive filter regeneration applications will be discussed. The sensitivity of key design parameters like catalyst technology, PGM loading, catalyst sizing to meet the regulation limits has been investigated. The impact of operating conditions like cycle temperature and urea dosing strategy on the overall performance has also been studied. Model simulations and experimental validations along with thermal management studies have been conducted to propose a suitable ATS for India BS VI and China NS VI applications.
Data Sets - Support Documents
|[Unnamed Dataset 1]|
|[Unnamed Dataset 2]|
|[Unnamed Dataset 3]|
|[Unnamed Dataset 4]|
- Ahmadinejad, S., Desai, M., Watling, T., York, A.P.E., Simulation of Automotive Emission Control Systems, Advances in Chemical Engineering, vol. 33, ISSN 0065-2377, DOI 10.1016/S0065-2377(07)33002-0
- Desai, M., Tutuianu, M., Ahmadinejad, M., Watling, T. et al., "Modeling of Non-Road Diesel Exhaust Aftertreatment Systems: Diesel Oxidation and Selective Catalytic Reduction Catalysts," SAE Technical Paper 2010-01-2092, 2010, doi:10.4271/2010-01-2092.
- Watling, T., Ahmadinejad, M., Ţuţuianu, M., Johansson, Å. et al., "Development and Validation of a Pt-Pd Diesel Oxidation Catalyst Model," SAE Int. J. Engines 5(3):1420-1442, 2012, doi:10.4271/2012-01-1286.
- Ahmadinejad, M., Tsolakis, A., Becker, J., Goersmann, C. et al., "Modelling of Soot Oxidation by NO2 in a Diesel Particulate Filter," SAE Int. J. Fuels Lubr. 5(1):359-369, 2012, doi:10.4271/2011-01-2083.
- York, A., Ahmadinejad, M., Watling, T., Walker, A. et al., "Modeling of the Catalyzed Continuously Regenerating Diesel Particulate Filter (CCR-DPF) System: Model Development and Passive Regeneration Studies," SAE Technical Paper 2007-01-0043, 2007, doi:10.4271/2007-01-0043.
- Watling, T., Lopez, Y., Pless, J., Sukumar, B. et al., "Removal of Hydrocarbons and Particulate Matter Using a Vanadia Selective Catalytic Reduction Catalyst: An Experimental and Modeling Study," SAE Int. J. Engines 6(2):882-897, 2013, doi:10.4271/2013-01-1071.
- York, A., Watling, T., Cox, J., Jones, I. et al., "Modeling an Ammonia SCR DeNOx Catalyst: Model Development and Validation," SAE Technical Paper 2004-01-0155, 2004, doi:10.4271/2004-01-0155.
- Watling, T., Tutuianu, M., Desai, M., Dai, J. et al., "Development and Validation of a Cu-Zeolite SCR Catalyst Model," SAE Technical Paper 2011-01-1299, 2011, doi:10.4271/2011-01-1299.
- Sukumar, B., Dai, J., Johansson, A., Markatou, P. et al., "Modeling of Dual Layer Ammonia Slip Catalysts (ASC)," SAE Technical Paper 2012-01-1294, 2012, doi:10.4271/2012-01-1294.
- Girard, J., Montreuil, C., Kim, J., Cavataio, G. et al., "Technical Advantages of Vanadium SCR Systems for Diesel NOx Control in Emerging Markets," SAE Int. J. Fuels Lubr. 1(1):488-494, 2009, doi:10.4271/2008-01-1029.
- Cheng, Y.; Lambert, C.; Kim, D. H.; Kwak, J. H.; Cho, S. J.; Peden, C. H. F. The different impacts of SO2 and SO3 on Cu/zeolite SCR catalysts, Catalysis Today, 2010, 151, 266-270.
- Cheng, Y., Montreuil, C., Cavataio, G., and Lambert, C., "The Effects of SO2 and SO3 Poisoning on Cu/Zeolite SCR Catalysts," SAE Technical Paper 2009-01-0898, 2009, doi:10.4271/2009-01-0898.