This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Effects of Injection Timing on Fluid Flow Characteristics of Partially Premixed Combustion Based on High-Speed Particle Image Velocimetry

Published March 28, 2017 by SAE International in United States
Effects of Injection Timing on Fluid Flow Characteristics of Partially Premixed Combustion Based on High-Speed Particle Image Velocimetry
Sector:
Citation: Izadi Najafabadi, M., Tanov, S., Wang, H., Somers, B. et al., "Effects of Injection Timing on Fluid Flow Characteristics of Partially Premixed Combustion Based on High-Speed Particle Image Velocimetry," SAE Int. J. Engines 10(4):1443-1453, 2017, https://doi.org/10.4271/2017-01-0744.
Language: English

References

  1. Manente, V., Johansson, B., and Cannella, W., "Gasoline partially premixed combustion, the future of internal combustion engines?, " Int. J. Engine Res. 12(3):194-208, 2011, doi:10.1177/1468087411402441.
  2. Hardy, W. and Reitz, R., "An Experimental Investigation of Partially Premixed Combustion Strategies Using Multiple Injections in a Heavy-Duty Diesel Engine," SAE Technical Paper 2006-01-0917, 2006, doi:10.4271/2006-01-0917.
  3. Noehre, C., Andersson, M., Johansson, B., and Hultqvist, A., "Characterization of Partially Premixed Combustion," SAE Technical Paper 2006-01-3412, 2006, doi:10.4271/2006-01-3412.
  4. Izadi Najafabadi, M., Somers, B., and Nuraini, A., "Validation of a Reduced Chemical Mechanism Coupled to CFD Model in a 2-Stroke HCCI Engine," SAE Technical Paper 2015-01-0392, 2015, doi:10.4271/2015-01-0392.
  5. Neely, G., Sasaki, S., and Leet, J., "Experimental Investigation of PCCI-DI Combustion on Emissions in a Light-Duty Diesel Engine," SAE Technical Paper 2004-01-0121, 2004, doi:10.4271/2004-01-0121.
  6. Kalghatgi, G., Risberg, P., and Ångström, H., "Advantages of Fuels with High Resistance to Auto-ignition in Late-injection, Low-temperature, Compression Ignition Combustion," SAE Technical Paper 2006-01-3385, 2006, doi:10.4271/2006-01-3385.
  7. Yin, L., Ingesson, G., Shamun, S., Tunestal, P. et al., "Sensitivity Analysis of Partially Premixed Combustion (PPC) for Control Purposes," SAE Technical Paper 2015-01-0884, 2015, doi:10.4271/2015-01-0884.
  8. Hanson, R., Splitter, D., and Reitz, R., "Operating a Heavy-Duty Direct-Injection Compression-Ignition Engine with Gasoline for Low Emissions," SAE Technical Paper 2009-01-1442, 2009, doi:10.4271/2009-01-1442.
  9. Wang, Z., Tanov, S., Wang, H., Richter, M. et al., "High-Speed Particle Image Velocimetry Measurement of Partially Premixed Combustion (PPC) in a Light Duty Engine for Different Injection Strategies," SAE Technical Paper 2015-24-2454, 2015, doi:10.4271/2015-24-2454.
  10. Johansson, B., "Influence of the Velocity Near the Spark Plug on Early Flame Development," SAE Technical Paper 930481, 1993, doi:10.4271/930481.
  11. Miles, P., Megerle, M., Sick, V., Richards, K. et al., "The Evolution of Flow Structures and Turbulence in a Fired HSDI Diesel Engine," SAE Technical Paper 2001-01-3501, 2001, doi:10.4271/2001-01-3501.
  12. Miles, P., Megerle, M., Hammer, J., Nagel, Z. et al., "Late-Cycle Turbulence Generation in Swirl-Supported, Direct-Injection Diesel Engines," SAE Technical Paper 2002-01-0891, 2002, doi:10.4271/2002-01-0891.
  13. Miles, P.C., Collin, R., Hildingsson, L., Hultqvist, A., Andersson, Ö., “Combined measurements of flow structure, partially oxidized fuel, and soot in a high-speed, direct-injection diesel engine,” Proc. Combust. Inst. 31(2):2963-2970, doi:10.1016/j.proci.2006.07.231
  14. Miles, P.C., Hildingsson, L., Hultqvist, A., “The influence of fuel injection and heat release on bulk flow structures in a direct-injection, swirl-supported diesel engine”, Exp. Fluids 43(2-3): 273, 2007, doi:10.1007/s00348-007-0281-7.
  15. Zegers, R.P.C., Luijten, C.C.M., Dam, N. J., De Goey, L.P.H., "Pre- and post-injection flow characterization in a heavy-duty diesel engine using high-speed PIV, " Exp. Fluids 53(3):731-746, 2012, doi:10.1007/s00348-012-1323-3.
  16. http://www.dantecdynamics.com/particle-image-velocimetry
  17. Tanov, S., Wang, Z., Wang, H., Richter, M. et al., "Effects of Injection Strategies on Fluid Flow and Turbulence in Partially Premixed Combustion (PPC) in a Light Duty Engine," SAE Technical Paper 2015-24-2455, 2015, doi:10.4271/2015-24-2455.
  18. Izadi Najafabadi, M., Dam, N., Somers, B., and Johansson, B., "Ignition Sensitivity Study of Partially Premixed Combustion by Using Shadowgraphy and OH* Chemiluminescence Methods," SAE Technical Paper 2016-01-0761, 2016, doi:10.4271/2016-01-0761.
  19. Wang, H.; Tanov, S.; Izadi Najafabadi, M.; Wang, Z.; Johansson, B., "Time-resolved in-cylinder PIV measurement in a light duty optical engine under PPC conditions," Lisbon 2016 International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics, 2016.
  20. Tanov, S., Johansson, B., Izadi Najafabadi, M., Wang, H., "Analyzing Of In-Cylinder Flow Structures And Cyclic Variations Of Partially Premix Combustion In A Light Duty Engine," FISITA 2016 World Automotive Congress, F2016-ESYF-005, 2016.
  21. Woschni, G. and Fieger, J., “Determination of Local Heat Transfer Coefficients at the Piston of a High Speed Diesel Engine by Evaluation of Measured Temperature Distribution,” SAE Technical Paper 790834, 1979, doi:10.4271/790834.
  22. Gatowski, J., Balles, E., Chun, K., Nelson, F. et al., "Heat Release Analysis of Engine Pressure Data," SAE Technical Paper 841359, 1984, doi:10.4271/841359.
  23. Miles P C, “Turbulent flow structure in direct-injection, swirl-supported diesel engines” in Flow and combustion in reciprocating engines, ed. Arcoumanis C. and Kamimoto T., Springer Berlin, Heidelberg Germany (2009).
  24. Tabaczynski Rodney J., "Turbulence and turbulent combustion in spark-ignition engines," Prog. Energy Combust. Sci. 2(3): 143-165, 2003, doi:10.1016/0360-1285(76)90010-1.

Cited By