This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Integrated Model-In-Loop (MiL) Simulation Approach to Validate Active Roll Control System
ISSN: 0148-7191, e-ISSN: 2688-3627
Published March 28, 2017 by SAE International in United States
This content contains downloadable datasetsAnnotation ability available
Active roll control system offers better solution in improving the vehicle comfort and handling. There are various ways of active roll control system actuation like electrical, hydraulic and electro-hydraulic combination systems etc. For the current work, dual hydraulic actuator based active roll control mechanism is used. In this paper we have used integrated Model-In-Loop (MIL) based simulation approach to validate the active roll control system. Dual linear hydraulic actuators models and control logic for improving the roll dynamics of the vehicle is built using Matlab/Simulink. The desired car characteristics maneuver and road profiles are modeled in IPG Car maker(a Model in Loop based tool). Simulink model is integrated with Car Maker model for validating the performance in extreme cornering maneuvers, such as double steer step, slalom 18m, fishhook. For these dynamic maneuvers the roll angle vs lateral acceleration is monitored and effectively maintained to the desired values. The proposed integrated approach offers numerous advantages in terms of cost and time involved in the physical testing and validation.
CitationKota, K. and Sivanandham, B., "Integrated Model-In-Loop (MiL) Simulation Approach to Validate Active Roll Control System," SAE Technical Paper 2017-01-0435, 2017, https://doi.org/10.4271/2017-01-0435.
Data Sets - Support Documents
|[Unnamed Dataset 1]|
- Arnaud J.P. Miège, Wolfson College,”Development of active anti roll control for heavy vehicles”Cambridge University Engineering department, Sep 13,2000
- Danesin, D., Krief, P., Sorniotti, A., and Velardocchia, M., "Active Roll Control to Increase Handling and Comfort," SAE Technical Paper 2003-01-0962, 2003, doi:10.4271/2003-01-0962.
- Sorniotti, A. MORGANDO and A. velardocchia, M. ”Active Roll control :System design and Hardware in Loop test bench”, Politecnico di Torino, Department of Mechanics
- IPG CarMaker Refernce Guide
- Sorniotti, A. and D'Alfio, N., "Vehicle Dynamics Simulation to Develop an Active Roll Control System," SAE Technical Paper 2007-01-0828, 2007, doi:10.4271/2007-01-0828.
- Cooper, N., Crolla, D., Levesley, M., and Manning, W., "Integration of Active Suspension and Active Driveline to Ensure Stability While Improving Vehicle Dynamics," SAE Technical Paper 2005-01-0414, 2005, doi:10.4271/2005-01-0414.
- Gay, F., Coudert, N., Rifqi, I., and de Larminat, P., "Development of Hydraulic Active Suspension with Feedforward and Feedback Design," SAE Technical Paper 2000-01-0104, 2000, doi:10.4271/2000-01-0104.
- Sampson and D.J.M. Cebon, D.,”An investigation of Roll control sytem design for articulated Heavy Vehicles”,Cambridge University Engineering Department.
- Wheals, J., Baker, H., Ramsey, K., and Turner, W., "Torque Vectoring AWD Driveline: Design, Simulation, Capabilities and Control," SAE Technical Paper 2004-01-0863, 2004, doi:10.4271/2004-01-0863.
- Whitehead, R., Travis, W., Bevly, D., and Flowers, G., "A Study of the Effect of Various Vehicle Properties on Rollover Propensity," SAE Technical Paper 2004-01-2094, 2004, doi:10.4271/2004-01-2094.
- Gaffney, E., Keane, J., and Nicols, J., "High Efficiency 2 Channel Active Roll Control System," SAE Technical Paper 2009-01-0222, 2009, doi:10.4271/2009-01-0222.
- Jianbo Lu, Dave Messih, Albert Salib “Roll Rate based stability control” Ford Motor company ,United staes,paper number07-136
- NHTSA. Phase IV Rollover Testing.2002. George Washington Transportation Research Institute
- Travis, W., Whitehead, R., Bevly, D. M., and Flowers G. T. Using Scaled Vehicles to Investigate the Influence of Various Properties on Rollover Propensity. Proceedings of the 2004 American Controls Conference, June 2004
- Gillespie, T., “Fundamentals of Vehicle Dynamics,” (Warrendale, Society of Automotive Engineers, Inc., 1992), doi:10.4271/R-114.