This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Regenerative Brake-by-Wire System Development and Hardware-In-Loop Test for Autonomous Electrified Vehicle
ISSN: 0148-7191, e-ISSN: 2688-3627
Published March 28, 2017 by SAE International in United States
This content contains downloadable datasetsAnnotation ability available
As the essential of future driver assistance system, brake-by-wire system is capable of performing autonomous intervention to enhance vehicle safety significantly. Regenerative braking is the most effective technology of improving energy consumption of electrified vehicle. A novel brake-by-wire system scheme with integrated functions of active braking and regenerative braking, is proposed in this paper. Four pressure-difference-limit valves are added to conventional four-channel brake structure to fulfill more precise pressure modulation. Four independent isolating valves are adopted to cut off connections between brake pedal and wheel cylinders. Two stroke simulators are equipped to imitate conventional brake pedal feel. The operation principles of newly developed system are analyzed minutely according to different working modes. High fidelity models of subsystems are built in commercial software MATLAB and AMESim respectively. The control strategies of brake force distribution and hydraulic pressure modulation are designed on basis of closed-loop controller simultaneously. Co-simulations under typical braking and active braking scenarios are conducted to validate the feasibility of proposed system architecture and reasonability of designed control algorithm. Simulation results show that the motor brake torque works cooperatively with hydraulic brake force. More than 36% of recoverable energy can be regenerated during typical braking procedure. Active braking can shorten the brake distance by nearly 18% compared with conventional driver emergency braking. Hardware-in-loop (HIL) bench tests are implemented under scenarios identical with simulations. The data acquired from HIL bench tests matches well with simulation results. Nearly 37% of recoverable energy is regenerated under typical braking condition, and brake distance is shortened by 4.33 m during active braking procedure.
CitationYuan, Y., Zhang, J., Li, Y., and Lv, C., "Regenerative Brake-by-Wire System Development and Hardware-In-Loop Test for Autonomous Electrified Vehicle," SAE Technical Paper 2017-01-0401, 2017, https://doi.org/10.4271/2017-01-0401.
Data Sets - Support Documents
|[Unnamed Dataset 1]|
- Shladover, Steven E., "Research and Development Issues in Intelligent Vehicle/Highway Systems (IVHS)," Advanced automotive technologies, 1991
- von Albrichsfeld, C. and Karner, J., "Brake System for Hybrid and Electric Vehicles," SAE Technical Paper 2009-01-1217, 2009, doi:10.4271/2009-01-1217
- Sinha, P., "Architectural Design and Reliability Analysis of a Fail-Operational Brake-By-Wire System from ISO 26262 Perspectives." Reliability Engineering & System Safety, 96(10):1349-59, 2011, doi:10.1016/j.ress.2011.03.013
- Jonner, W., Winner, H., Dreilich, L., and Schunck, E., "Electrohydraulic Brake System - The First Approach to Brake-By-Wire Technology," SAE Technical Paper 960991, 1996, doi:10.4271/960991
- Underwood, S., Khalil, A., Husain, I., Klode, H., , "Switched Reluctance Motor Based Electromechanical Brake-By-Wire System," International journal of vehicle autonomous systems, 2(3-4): 278-296, 2004, doi:10.1504/IJVAS.2004.006099
- Ho, L., Roberts, R., Hartmann, H., and Gombert, B., "The Electronic Wedge Brake - EWB," SAE Technical Paper 2006-01-3196, 2006, doi:10.4271/2006-01-3196
- Liu, H., Deng, W., He, R., Wu, J. , "Fault-Tolerant Control of Brake-by-Wire Systems Based on Control Allocation," SAE Technical Paper 2016-01-0132, 2016, doi:10.4271/2016-01-0132
- Nakamura, E., Soga, M., Sakai, A., Otomo, A. , "Development of Electronically Controlled Brake System for Hybrid Vehicle," SAE Technical Paper 2002-01-0300, 2002, doi:10.4271/2002-01-0300
- TRW. Cognitive safety systems, news releases, http://trw.mediaroom.com/index.php?s=43&item=336 (2012)
- Tagata, K., Sakai, K., Aoki, Y., "Vehicle brake device," US Patent, 7360360, 2007
- Yuan, Y., Zhang, J., Lv, C., and Li, Y., "Design and Performance Analysis of a Novel Regenerative Braking System for Electrified Passenger Vehicles," SAE Int. J. Mater. Manf. 9(3):699-706, 2016, doi:10.4271/2016-01-0438
- Ruscio, D., Maria Rita C., Federica B., "How Does a Collision Warning System Shape Driver's Brake Response Time? The Influence of Expectancy and Automation Complacency On Real-Life Emergency Braking," Accident Analysis & Prevention, 77(2015): 72-81, doi:10.1016/j.aap.2015.01.018