This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Influences of Pad Backplate on Thermo-Mechnical Coupling in Disc Brake
Technical Paper
2016-01-1354
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The transient thermo-mechanical coupling dynamic model of ventilated disc brake with asymmetrical outer and inner thickness was established by means of Msc-marc software. In the model, pad backplate is simplified as a rigid surface with the same shape of brake lining and is bonded together with brake lining. Control node is associated with the rigid surface and the equivalent force that replaces the pressure is applied on the control nodes, of which the degrees of freedom in radial and rotational directions are constrained. With distribution characteristics of disc temperature field, normal stress field and lateral thermo-elastic deformation and thickness for the evaluation, the impacts of brake pad constraints on brake thermomechanical coupling characteristics were analyzed. The simulation results show that the brake pad back plate is an important structure in brake thermo-mechanical coupling analysis, which can’t be ignored in simulation computing. The brake pad constraints can affect thermo-mechanical coupling characteristics of disc brake directly.
Recommended Content
Technical Paper | Brake Squeal Suppression Through Structural Design Modifications |
Ground Vehicle Standard | Wear Test Procedure on Inertia Dynamometer for Brake Friction Materials |
Technical Paper | Effect of Thermo-Mechanical Behavior on Drum Brake Labyrinth Design |
Authors
Citation
Meng, D., Zhang, L., and Yu, Z., "Influences of Pad Backplate on Thermo-Mechnical Coupling in Disc Brake," SAE Technical Paper 2016-01-1354, 2016, https://doi.org/10.4271/2016-01-1354.Also In
References
- Gao , C-H. , Huang , J-M. , Lin , X-Z. and Tang , X-S. Research status on heat dynamics of friction and wear for disc-pad braking systems Chinese Journal of Construction Machinery 4 1 83 88 2006 10.15999/j.cnki.311926.2006.01.021
- Panier , S. , Dufrenoy , P. and Weichert , D. An experimental investigation of hot spots in railway disc brakes Wear 256 7-8 764 773 2004 10.1016/S0043-1648(03)00459-9
- Kasem , H. , Brunel , J. F. , Dufrenoy , P. , Siroux , M. et al. Thermal levels and subsurface damage induced by the occurrence of hot spots during high-energy braking Wear 270 5-6 355 364 2011 10.1016/j.wear.2010.11.007
- Kao , T. K. , Richmond , J. W. and Douarre , A. Brake disc hot spotting and thermal judder: an experimental and finite element study International Journal of Vehicle Design 23 3 276 296 2000
- Bryant , D. , Fieldhouse , J. , Crampton , A. , Talbot , C. et al. Thermal Brake Judder Investigations Using a High Speed Dynamometer SAE Technical Paper 2008-01-0818 2008 10.4271/2008-01-0818
- Meng , D, J. , Zhang , L. J. and Yu , Z. P. Modeling and simulation of brake judder considering the effects of thermomechanical coupling Journal of Vibroengineering 16 7 3637 3654 2014
- Hassan , M. , Brooks , P. , and Barton , D. Thermo-Mechanical Contact Analysis of Car Disc Brake Squeal SAE Int. J. Passeng. Cars - Mech. Syst. 1 1 1230 1239 2009 10.4271/2008-01-2566
- Apte , A. and Ravi , H. FE Prediction of Thermal Performance and Stresses in a Disc Brake System SAE Technical Paper 2006-01-3558 2006 10.4271/2006-01-3558
- Gao , C. H. , Huang J. M. , Lin X. Z. , and Tang X. S. Stress analysis of thermal fatigue fracture of brake disks based on thermomechanical coupling Journal of Tribology 129 3 536 543 2007 10.1115/1.2736437
- Hwang , P. , Wu , X. , and Jeon , Y. Repeated Brake Temperature Analysis of Ventilated Brake Disc on the Downhill Road SAE Technical Paper 2008-01-2571 2008 10.4271/2008-01-2571
- Panier , S. , Dufrenoy P. , Brunel J. F. , and Weichert. D. Progressive waviness distortion: A new approach of hot spotting in disc brakes Journal of Thermal Stresses 28 1 47 62 2005 10.1080/01495730490498638
- Belhocine , Ali and Mostefa Bouchetara Thermomechanical modelling of dry contacts in automotive disc brake International Journal of Thermal Sciences 60 161 170 2012 10.1016/j.ijthermalsci.2012.05.006
- Yang , Z. , Han , J. , Li , W. , Chen , Y. et al. Thermo-mechanical coupling simulation of braking process of brake disc Jixie Gongcheng Xuebao/Journal of Mechanical Engineering 46 2 88 92 2010 10.3901/JME.2010.02.088
- Cho , H. J. and Cho , C. D. A study of thermal and mechanical behaviour for the optimal design of automotive disc brakes Proceedings of the Institution of Mechanical Engineers Part DJournal of Automobile Engineering 222 6 895 915 2008 10.1243/09544070JAUTO722
- Jung , S. P. , Park , T. W. , Chai , J. B. and Chung , W. S. Thermo-Mechanical Finite Element Analysis of Hot Judder Phenomenon of a Ventilated Disc Brake System International Journal of Precision Engineering and Manufacturing 12 5 821 828 2011
- Mule , N. , Pilane , D. , Mahale , P. , and Raajha , M. FEA Analysis and Correlation of Thermo-Mechanical Deformations of a Disc Brake Rotor SAE Technical Paper 2015-26-0206 2015 10.4271/2015-26-0206
- Meng , D. , Zhang , L. and Yu , Z Theoretical modeling and FEA of thermo-mechanical coupling dynamics of ventilated disc brake Tongji Daxue Xuebao/Journal of Tongji University 38 6 890 897 2010 10.3969/j.issn.0253-374x.2010.06.020
- Zhang , L. , Chen , Y. , Diao , K. and Meng , D Computational investigation into disc-pads pressure distribution and thermomechanical coupling characteristics of brake pads in disc brake Tongji Daxue Xuebao/Journal of Tongji University 41 10 1554 1561 2013 10.3969/j.issn.0253-374x.2013.10.018
- Meng , D. , Zhang , L. and Yu , Z Impacts of initial SRO on thermo-mechanical coupling characteristics of disc brake Tongji Daxue Xuebao/Journal of Tongji University 40 2 272 280 2012 10.3969/j.issn.0253-374x.2012.12.020
- Kim , S.W. , Park , K. , Lee , S.H. , Kang , K.H. and Lim , K.T. Thermophysical properties of automotive metallic brake disk materials International Journal of Thermophysics 2008 29 6 2179 2188 10.1007/s10765-008-0537-3
- Yevtushenko , A.A. and Grzes , P. Axisymmetric finite element model for the calculation of temperature at braking for thermosensitive materials of a pad and a disc Numerical Heat Transfer Part A: Applications 2012 62 3 211 230 10.1080/10407782.2012.691052
- Limpert , R. Brake Design and Safety, Third Edition Warrendale SAE International 2011 10.4271/R-398