Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Identification of True Stress-Strain Curve of Thermoplastic Polymers under Biaxial Tension

Journal Article
2016-01-0514
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2016-01-0514
Published April 05, 2016 by SAE International in United States
Identification of True Stress-Strain Curve of Thermoplastic Polymers under Biaxial Tension
Sector:
Citation: Meng, Y., Xia, Y., Zhou, Q., and Lin, S., "Identification of True Stress-Strain Curve of Thermoplastic Polymers under Biaxial Tension," SAE Int. J. Mater. Manf. 9(3):768-775, 2016, https://doi.org/10.4271/2016-01-0514.
Language: English

References

  1. Ward , I. M. Review: “The yield behaviour of polymers,” Journal of Materials Science 6 11 1397 1417 1971 10.1007/BF00549685
  2. Kolling , S. , Haufe , A. , Feucht , M. , and Bois , P. A. D. SAMP-1: A Semi-Analytical Model for the Simulation of Polymers The 4th LS-DYNA Anwenderforum Bamberg 2005
  3. Bois , P. A. D. , Kolling , S. , Koesters , M. , and Frank , T. Material behaviour of polymers under impact loading International Journal of Impact Engineering 32 5 725 740 2006 10.1016/j.ijimpeng.2005.02.007
  4. Bardia , P. , and Narasimhan , R. Characterisation of Pressure-sensitive Yielding in Polymers Strain 42 3 187 196 2006 10.1111/j.1475-1305.2006.00272.x
  5. Farrokh , B. , and Khan , A. S. A strain rate dependent yield criterion for isotropy polymers: Low to high rates of loading European Journal of Mechanics A/Solids 29 2 274 282 2010 10.1016/j.euromechsol.2009.08.004
  6. Ghorbel , E. A viscoplastic constitutive model for polymeric materials International Journal of Plasticity 24 11 2032 2058 2008 10.1016/j.ijplas.2008.01.003
  7. Lin , S. Study on Biaxial Tension Test Technique and Failure Model of Polymeric Materials in Vehicles Master thesis Department of Automotive Engineering, Tsinghua University Beijing 2013
  8. Boehler , J. P. , Demmerle , and S. , Koss , S. A new direct biaxial testing machine for anisotropic materials Experimental Mechanics 34 1 1 9 1994 10.1007/BF02328435
  9. Hannon , A. , and Tiernan , P. A review of planar biaxial tensile test systems for sheet metal Journal of Material Processing Technology 198 1-3 1 13 2008 10.1016/j.jmatprotec.2007.10.015
  10. Kuwabara , T. , Ikeda , S. , and Kuroda , K. Measurement and analysis of differential work hardening in cold rolled steel sheet under biaxial tension Journal of Material Processing Technology 80-81 517 523 1998 10.1016/S0924-0136(98)00155-1
  11. Fraunhofer Dynamic material testing http://www.emi.fraunhofer.de Jun. 2013
  12. Ferron , G. , and Makinde , A. Design and development of a biaxial strength testing device Journal of Testing and Evaluation 16 253 256 1988
  13. Xia , Y. , Zhu , J. , Wang , K. , and Zhou , Q. Design and verification of a strain gauge based load sensor for medium-speed dynamic tests with a hydraulic test machine International Journal of Impact Engineering
  14. Ramault , C. , Makris , A. , Hemelrijck , D. V. , and Lamkanfi , E. et al. Comparison of Different Techniques for Strain Monitoring of a Biaxially Loaded Cruciform Specimen Strain 47 210 217 2011 10.1111/j.1475-1305.2010.00760.x
  15. Smits , A. , Hemelrijick , D. V. , Philippidis , T. P. , and Cardon , A. Design of a cruciform specimen for biaxial testing of fibre reinforced composite laminates Composites Science and Technology 66 7-8 964 975 2006 10.1016/j.compscitech.2005.08.011
  16. Ohtake , Y. , Rokugawa , S. , and Masumoto , H. Geometry determination of cruciform type specimen and biaxial tensile test of C/C composites Key Engineering Materials 164-165 151 154 1998 10.4028/www.scientific.net/KEM.164-165.151
  17. Yu , Y. , Wan , M. , Wu , X. , and Zhou , X B. Design of a cruciform biaxial tensile specimen for limit strain analysis by FEM Journal of Materials Processing Technology 123 1 67 70 2001 10.1016/S0924-0136(02)00062-6
  18. Welsh , J. S. , and Adams , D. F. An experimental investigation of the biaxial strength of IM6/3501-6 carbon/epoxy cross-ply laminates using cruciform specimens Composites Part A: Applied Science and Manufacturing 33 6 829 839 2002 10.1016/S1359-835X(01)00142-7
  19. Terriault , P. , Settouane , K. , and Brailovski , V. Biaxial testing at different temperatures of cruciform TI-NI samples Proceedings of the International Conference on Shape Memory and Superelastic Technologies ASM International, California 2004 247
  20. Moreno , M. C. S. , and Cela , J. J. L. Failure envelope under biaxial tensile loading for chopped glass-reinforced polyester composites Composites Science and Technology 72 1 91 96 2011 10.1016/j.compscitech.2011.10.005
  21. Hanabusa , Y. , Takizawa , H. , and Kuwabara , T. Numerical verification of a biaxial tensile test method using a cruciform specimen Journal of Materials Processing Technology 213 6 961 970 2013 10.1016/j.jmatprotec.2012.12.007
  22. Becker , S. , Combeaud , C. , Fournier , F. , and Rodriguez , J. et al. Biaxial tension on polymer in thermoforming range 14th International Conference on Experimental Mechanics 2010
  23. Takekeshi , K. , and Niwa , K. Validation and material modeling of polymers by employing MAT_SAMP-1 12th International LS-DYNA Users Conference 2012

Cited By

Recommended Content

Journal Article Research on Temperature and Strain Rate Dependent Viscoelastic Response of Polyvinyl Butaral Film
Technical Paper Numerical Simulation of CFRP Thin-Walled Tubes Subjected to Quasi-Static Axial Crushing
Technical Paper Weight Reduction with Sandwich Material on Front End Carrier Application