This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Finite Element Analysis of Adhesive Joining on Composite Materials
Technical Paper
2016-01-0502
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The application of adhesively bonded joints has increased significantly in order to improve the integrity of structural components in vehicle design. In this paper, finite element analysis is used to model the adhesive behavior of the adhesive joining between steel and composite. The cohesive element modeling techniques in Abaqus is used to model the adhesive interface. The standard lap shear and peeling test are first conducted to estimate the adhesive properties using reverse engineering. Next, these adhesive properties are applied and validated on the FE model of a 3D part for complex loading condition. The FEA model using reverse engineered cohesive interface properties get closed match to the test results for joining of the complex shape parts.
Recommended Content
Technical Paper | Benefit of Structural Adhesives in Full Car Crash Applications |
Technical Paper | Verification of Fastener Modeling Techniques for Joining Composite and Metallic Assemblies |
Technical Paper | Modelling Rivets in the Finite Element Analysis |
Authors
Citation
Song, Y. and Gandhi, U., "Finite Element Analysis of Adhesive Joining on Composite Materials," SAE Technical Paper 2016-01-0502, 2016, https://doi.org/10.4271/2016-01-0502.Also In
References
- Gibson , R. F. Principles of composite material mechanics CRC press 2011
- Cole , G. S. , & Sherman , A. M. Lightweight materials for automotive applications Materials characterization 35 1 3 9 1995
- Das , S. The cost of automotive polymer composites: a review and assessment of DOE's lightweight materials composites research (p. 47) Oak Ridge, TN Oak Ridge National Laboratory 2001
- Schwartz , M. M. Joining of composite-matrix materials (Book) Materials Park, OH ASM International 1994
- Messler , R. W. Joining composite materials and structures: some thought-provoking possibilities Journal of Thermoplastic Composite Materials 17 1 51 75 2004
- Matthews , F. L. , Kilty , P. F. , & Godwin , E. WA review of the strength of joints in fiber-reinforced plastics. Part 2. Adhesively bonded joints Composites 13 1 29 37 1982
- Vinson , J. R. Adhesive bonding of polymer composites Polymer Engineering & Science 29 19 1325 1331 1989
- Li , S. , Thouless , M. D. , Waas , A. M. , Schroeder , J. A. , & Zavattieri , P. D. Use of mode-I cohesive-zone models to describe the fracture of an adhesively-bonded polymer-matrix composite Composites Science and Technology 65 2 281 293 2005
- Lee , L. H. Adhesive bonding Springer Science & Business Media 2013
- He , X. A review of finite element analysis of adhesively bonded joints International Journal of Adhesion and Adhesives 31 4 248 264 2011
- Banea , M. D. , & da Silva , L. F. Adhesively bonded joints in composite materials: an overview. Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials Design and Applications 223 1 1 18 2009
- Blackman , B. R. K. , Hadavinia , H. , Kinloch , A. J. , & Williams , J. G. The use of a cohesive zone model to study the fracture of fiber composites and adhesively-bonded joints International Journal of Fracture 119 1 25 46 2003
- Valoroso , N. , & Fedele , R. Characterization of a cohesive-zone model describing damage and de-cohesion at bonded interfaces. Sensitivity analysis and mode-I parameter identification International Journal of Solids and Structures 47 13 1666 1677 2010
- Lee , M. J. , Cho , T. M. , Kim , W. S. , Lee , B. C. , & Lee , J. J. Determination of cohesive parameters for a mixed-mode cohesive zone model International Journal of Adhesion and Adhesives 30 5 322 328 2010
- Ghosh , D. , Pancholi , L. , and Sathaye , A. Comparative Studies of Adhesive Joints in Automotive SAE Technical Paper 2014-01-0788 2014 10.4271/2014-01-0788
- Fredrik Fors Analysis of Metal to Composite Adhesive Joints in Space Applications
- Yu-Ping Yang , Ritter George W. Speth David R. Finite Element Analyses of Composite-to-Steel Adhesive Joints, advanced materials & processes June 2011
- Swadener , J.G. , Liechti , K.M. Asymmetric shielding mechanisms in the mixed-mode fracture of a glass/epoxy interface Journal of Applied Mechanics 65 1 25 29 1998
- Wang , S.S. Fracture-mechanics for delamination problems in composite-materials Journal of Composite Materials 17 3 210 223 1983
- Yang , Q.D. , Thouless , M.D Mixed-mode fracture analyses of plastically-deforming adhesive joints International Journal of Fracture 110 2 175 187 2001
- Kaelble , D. H. 1971 Physical chemistry of adhesion Wiley-Interscience
- Abaqus manual version 6.12