This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Proposed Validation Method for the Uncertainty Estimation of CMM Straightness Measurement Using PSO Algorithm and SMC Technique
Technical Paper
2016-01-0285
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Straightness uncertainty in dimensional metrology is an important parameter in precision engineering. Optimization in straightness measurement using soft algorithm techniques is widely encountered solution in coordinate metrology. In this work, we report on the uncertainty in the CMM measurement of straightness feature for a slab surface. Straightness points have been measured precisely in 3D using CMM at NIS. The straightness has been analyzed using a Particle Swarm Optimization (PSO) algorithm. The probability density distribution of the measured spatial straightness was developed using a Sequential Monte Carlo (SMC) technique; forming probability density histogram with 95% confidence level representing an uncertainty in the straightness measurement. Comparison with relevant reports showed and approved that our results are more accurate since we used a computationally efficient modified SMC technique and PSO algorithm. This work confirms that the developed strategic methodology can achieve validation method successfully for straightness uncertainty. Moreover, uncertainty in straightness measurement has been estimated and found to be suitable of the proposed validation method for CMM dimensional metrology.
Authors
Topic
Citation
Ali, S., Khalafalla, M., Naeim, I., and Zahwi, S., "Proposed Validation Method for the Uncertainty Estimation of CMM Straightness Measurement Using PSO Algorithm and SMC Technique," SAE Technical Paper 2016-01-0285, 2016, https://doi.org/10.4271/2016-01-0285.Also In
References
- Ali Salah H. R. Advanced Nanomeasuring Techniques for Surface Characterization ISRN Optics Journal Vol. 2012 1 23 Article ID 859353 2090-7826 (Online) 2012
- Xiulan Wen , Youxiong Xu , Hongsheng Li , Fenglin Wang and Danghong Sheng Monte Carlo method for the uncertainty evaluation of spatial straightness error based on new generation geometrical product specification Chinese Journal of Mechanical Engineering Vol. 25 5 pp. 875 881 2012
- Hennebelle F. , Coorevits T. and Bigerelle M. Optimization of the straightness measurements on rough surfaces by Monte Carlo simulation Wiley Periodicals, Inc. Scanning Vol. 36 ( 1 ) pp. 161 169 2013
- Ali Salah H.R. and Mohamd Omar M. Dimensional and Geometrical Form Accuracy of Circular Pockets Manufactured for Aluminum, Copper and Steel Materials on CNC Milling Machine using CMM Int. Journal of Engineering Research in Africa Vol 17 pp. 64 73 2015
- Ali Salah H.R. and Sidki Hossam M. CNC-CMM Measurement Accuracy and Accompanied Uncertainty at Different Alignment Positions of Long GBs International Review of Automatic Control (I.RE.A.CO.) 7 No. 5 485 491 3 Nov. 2014
- Ali , S. , Zahwi , S. , and Dadoura , H. Proposed Metrological Method for Identifying Automotive Brake Discs SAE Int. J. Fuels Lubr. 8 1 41 49 2015 10.4271/2015-01-0691
- Ali Salah H.R. , Dadoura H.H. and Bedewy M.K. Identifying Cylinder Liner Wear using Precise Coordinate Measurements Springer, Int. Journal of Precision Engineering and Manufacturing Vol. 10 no. 5 pp. 19 25 Dec. 2009
- He Mingzhao , Ye Xiaoyou , Li Jianshuang and Gan Xiaochuan Evaluation of Spatial Straightness Error using LaserTRACER Proc. SPIE 8759, Eighth International Symposium on Precision Engineering Measurement and Instrumentation 2013
- Arencibia Rosenda V. , Souza Claudio C. , Costa Henara L. and Filho Antonio P. Simplified model to estimate uncertainty in CMM Journal of the Brazilian Society of Mechanical Sciences and Engineering Vol. 37 Issue 1 pp. 411 421 2015
- Zhu LiMin , Ding Ye and Ding Han Algorithm for Spatial Straightness Evaluation using Theories of Linear Complex Chebyshev Approximation and Semi-infinite Linear Programming J. Manuf. Sci. Eng. 128 1 pp. 167 174 2005
- BIPM Joint Committee for Guides in Metrology, Evaluation of measurement data-Supplement 1 to the “Guide to the expression of uncertainty in measurement”-Propagation of distributions using a Monte Carlo method JCGM 101 2008
- ISO 10360-6, (2001) Coordinate Metrology, International Standard: Geometrical Product Specifications (GPS)-Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM)-Part 6: CMMs used for Measuring Size Switzerland
- Yang Jingzhao , Li Guoxi , Wu Baozhong , Gong Jingzhong , Wang Jie and Zhang Meng Efficient Methods for Evaluating Task-Specific Uncertainty in Laser-Tracking Measurement MAPAN 30 2 pp 105 117 2015
- SwarmOps Numerical & Heuristic Optimization for Matlab Version 1.1 2015 The website on: http://www.hvass-labs.org/projects/swarmops/matlab/
- Jiale Han , En Li , Bingjie Tao and Ming Lv Reading recognition method of analog measuring instruments based on improved hough transform Electronic Measurement & Instruments (ICEMI), 10th International Conference on Vol. 2 IEEE 2011