This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Long-Haul Truck Sleeper Heating Load Reduction Package for Rest Period Idling
- Zhiming Luo - Aearo Technologies LLC ,
- John Zehme - Aearo Technologies LLC ,
- Jason Aaron Lustbader - National Renewable Energy Laboratory ,
- Bidzina Kekelia - National Renewable Energy Laboratory ,
- Jeff Tomerlin - National Renewable Energy Laboratory ,
- Cory J. Kreutzer - National Renewable Energy Laboratory ,
- Skip Yeakel - Volvo Group North America ,
- Steven Adelman - Volvo Group North America
ISSN: 1946-3995, e-ISSN: 1946-4002
Published April 05, 2016 by SAE International in United States
Citation: Lustbader, J., Kekelia, B., Tomerlin, J., Kreutzer, C. et al., "Long-Haul Truck Sleeper Heating Load Reduction Package for Rest Period Idling," SAE Int. J. Passeng. Cars - Mech. Syst. 9(2):453-458, 2016, https://doi.org/10.4271/2016-01-0258.
Annual fuel use for sleeper cab truck rest period idling is estimated at 667 million gallons in the United States, or 6.8% of long-haul truck fuel use. Truck idling during a rest period represents zero freight efficiency and is largely done to supply accessory power for climate conditioning of the cab. The National Renewable Energy Laboratory’s CoolCab project aims to reduce heating, ventilating, and air conditioning (HVAC) loads and resulting fuel use from rest period idling by working closely with industry to design efficient long-haul truck thermal management systems while maintaining occupant comfort. Enhancing the thermal performance of cab/sleepers will enable smaller, lighter, and more cost-effective idle reduction solutions. In addition, if the fuel savings provide a one- to three-year payback period, fleet owners will be economically motivated to incorporate them. For candidate idle reduction technologies to be implemented by original equipment manufacturers and fleets, their effectiveness must be quantified. To address this need, several promising candidate technologies were evaluated through experimentation and modeling to determine their effectiveness in reducing rest period HVAC loads. Load reduction strategies were grouped into the focus areas of solar envelope, occupant environment, conductive pathways, and efficient equipment. Technologies in each of these focus areas were investigated in collaboration with industry partners. The most promising of these technologies were then combined with the goal of exceeding a 30% reduction in HVAC loads. These technologies included “ultra-white” paint, advanced insulation, and advanced curtain design. Previous testing showed more than a 35.7% reduction in air conditioning loads. This paper describes the overall heat transfer coefficient testing of this advanced load reduction technology package that showed more than a 43% reduction in heating load. Adding an additional layer of advanced insulation with a reflective barrier to the thermal load reduction package resulted in a 53.3% reduction in the overall heat transfer coefficient.