This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Studies on Brake Pedal Feeling Based on a Novel Mechatronic Booster
Technical Paper
2016-01-0014
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Nowadays, the vehicle market puts forward urgent requirement for new kinds of braking booster because the traditional vacuum booster cannot meet the demands of new energy vehicles anymore. However, one problem that all the new plans should face is how to guarantee an ideal pedal feeling. In this paper, a novel mechatronics braking booster is proposed, and servo motor introduced into the booster makes the assist rate can be adjusted under a great degrees of freedom, so the structural parameters and control parameters of the booster should be determined elaborately to get an optimal pedal feeling. The pedal feeling is always represented by the pedal stoke-force curve which is influenced by different parameters. In this paper, the pedal stoke-force curve is firstly studied by batch simulation using AMESim, different structural and control parameters, such as the parameters of the decelerating devices, the stiffness coefficient of the return spring, the assist rate of the booster, are investigated. Results show that structural parameters influence the pedal feeling in a rigid way, such as, the lead angle of the screwing gearing can cause self-locking if not chose well, resulting in bad pedal feeling and cause security problems; yet control parameters can influence the pedal feeling flexibly, so we can adjust the assist rate to get a good pedal feeling under different conditions. Finally, the bench test is carried out under different operating conditions whose results show that the booster has an ideal pedal force-stroke curve just similar with traditional vehicle. The method that verified in this paper can be used to eliminate the time-consuming calibration work, providing a theoretical basis for the design of new braking boosters.
Recommended Content
Authors
- Shun Yang - State Key Lab of ASCL, Jilin University
- Weiwen Deng - State Key Lab of ASCL, Jilin University
- Haizhen Liu - State Key Lab of ASCL, Jilin University
- Rui He - State Key Lab of ASCL, Jilin University
- Lei Qian - State Key Lab of ASCL, Jilin University
- Wenlong Sun - State Key Lab of ASCL, Jilin University
- Ji Gao - State Key Lab of ASCL, Jilin University
Citation
Yang, S., Deng, W., Liu, H., He, R. et al., "Studies on Brake Pedal Feeling Based on a Novel Mechatronic Booster," SAE Technical Paper 2016-01-0014, 2016, https://doi.org/10.4271/2016-01-0014.Also In
References
- De Arruda Pereira , J. New Fiesta: Brake Pedal Feeling Development to Improve Customer Satisfaction SAE Technical Paper 2003-01-3598 2003 10.4271/2003-01-3598
- De Arruda Pereira , J. New Fiesta: Brake Pedal Feeling Development to Improve Customer Satisfaction SAE Technical Paper 2003-01-3598 2003 10.4271/2003-01-3598
- Aoki , Y. , Suzuki , K. , Nakano , H. , Akamine , K. et al. Development of Hydraulic Servo Brake System for Cooperative Control with Regenerative Brake SAE Technical Paper 2007-01-0868 2007 10.4271/2007-01-0868
- von Albrichsfeld , C. and Karner , J. Brake System for Hybrid and Electric Vehicles SAE Technical Paper 2009-01-1217 2009 10.4271/2009-01-1217
- Wang Cong Study on brake pedal stroke simulator and control strategy for hybrid electric car [D]. Changchun: College of Automotive Engineering Jilin University 2012
- Ohtani , Y. , Innami , T. , Obata , T. , Yamaguchi , T. et al. Development of an Electrically-Driven Intelligent Brake Unit SAE Technical Paper 2011-01-0572 2011 10.4271/2011-01-0572
- Song Chuan-xue , Zheng Zhu-an , Jin Li-qiang et al. Application of pedal stroke simulator in brake-by-wire system [J] Journal of Jiangsu University Nature Science Edition 2013 34 1 17 22
- Koizumi , N. Effect of Phenolic Brake Piston Tribology on Brake Pedal Feel SAE Int. J. Mater. Manf. 7 1 1 9 2014 10.4271/2013-01-2051
- Antanaitis , D. , Martins , D. , Monsere , P. , and Riefe , M. Pneumatic Brake Apply System Response and Aero-Acoustic Performance Considerations SAE Int. J. Passeng. Cars - Mech. Syst. 1 1 716 728 2009 10.4271/2008-01-0821
- Keerthi , M. , Shete , S. , Jadhav , N. , Nandkeolyar , K. et al. Optimization of Brake Pedal Feel and Performance for Dual Air Over Hydraulic System on Light Commercial Vehicles SAE Technical Paper 2010-01-1888 2010 10.4271/2010-01-1888
- Tretsiak D , Kliauzovich S , Augsburg K Research in hydraulic brake components and operational factors influencing the hysteresis losses [J] Proceedings of the institution of Mechanical Engineers Part D; Journal of Automobile Engineering 2008 222 9 1633 1645
- Shyrokau B , Wang D , Augsburg K et al. Vehicle dynamics with brake hysteresis[J].Proceedings of the institution of Mechanical Engineers Part D:Journal of Automobile Engineering 2013 227 2 139 150
- Liu Yang , Sun Ze-chang , Ji Wen-bin Brake pedal feeling and its influencing factors for electro-hydraulic brake system [J] Journal of Jilin University Engineering and Technology Edition 2015 04 1049 1055