This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
On Handling Waste Heat from Waste Heat Recovery Systems in Heavy-Duty Vehicles
Technical Paper
2015-01-2792
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The automotive industry have become more and more interested in recovering waste heat from internal combustion engines, especially with future, tighter fuel and CO2 emission regulations in sight.
In this study, we consider an automotive Rankine Waste Heat Recovery System on a long-haulage truck. This system transforms some of the combustion engine's waste heat into useful energy, but it still needs to return remaining heat to the surrounding, either through a direct condenser or from an indirect condenser via a Low Temperature Radiator, and this in the regular cooling module of the vehicle.
We focus on the integration of WHR-dedicated LTR or condenser into a generic, conventional truck-cooling module with an AC condenser, a cross-flow Charge Air Cooler, a down-flow High Temperature Radiator, and a fan. WHR cooling concepts considered are an indirect system with LTR; either in front or back of CAC, a direct system with condenser either in front or back of CAC. In addition, there is a discussion on various modeling problems on the 0D- and component sizing tools used.
The results show that it is important to consider when the WHR system is engaged and when it should be bypassed, how to maintain charge air- and coolant cooling needs, and when the fan need to be engaged. It is very dependent on where the LTR or condenser is placed, but at higher loads (∼75%) one should expect that additional fan work could easily be as much as 40% of the regained Rankine system work.
Recommended Content
Authors
Topic
Citation
Erlandsson, O., Skare, T., and Contet, A., "On Handling Waste Heat from Waste Heat Recovery Systems in Heavy-Duty Vehicles," SAE Technical Paper 2015-01-2792, 2015, https://doi.org/10.4271/2015-01-2792.Also In
References
- Latz , G. , Andersson , S. , and Munch , K. Comparison of Working Fluids in Both Subcritical and Supercritical Rankine Cycles for Waste-Heat Recovery Systems in Heavy-Duty Vehicles SAE Technical Paper 2012-01-1200 2012 10.4271/2012-01-1200
- Seher D. , Lengenfelder T. , Gerhardt J. , Eisenmenger N. , Hackner M. , Krinn I. Waste Heat Recovery for Commercial Vehicles with a Rankine Process 21st Aachen Colloquium Automobile and Engine Technology 2012
- Teng , H. , Klaver , J. , Park , T. , Hunter , G. et al. A Rankine Cycle System for Recovering Waste Heat from HD Diesel Engines - WHR System Development SAE Technical Paper 2011-01-0311 2011 10.4271/2011-01-0311
- Freymann , H. R. , Ringler , J. , Seifert , M. , Horst , T. The Second Generation Turbosteamer MTZ 02I2012 73 18 23
- Grelet , V. , Reiche , T. , Guillaume , L. , Lemort , V. Optimal Waste Heat Recovery Rankine Based for Heavy Duty Applications FISITA F2014-CET-151
- Dickson , J. , Ellis , M. , Rousseau , T. , and Smith , J. Validation and Design of Heavy Vehicle Cooling System with Waste Heat Recovery Condenser SAE Int. J. Commer. Veh. 7 2 458 467 2014 10.4271/2014-01-2339
- Horst , T.A. , Tegethoff , W. , Eilts , P. , Koehler , J. Prediction of dynamic Rankine Cycle waste heat recovery performance and fuel saving potential in passenger car applications considering interactions with vehicles' energy management Energy Conversion and Management 78 438 451 2014
- Doyle , E. , DiNanno , L. , and Kramer , S. Installation of a Diesel-Organic Rankine Compound Engine in a Class 8 Truck for a Single-Vehicle Test SAE Technical Paper 790646 1979 10.4271/790646
- Bae , S. , Heo , H. , Park , J. , Lee , H. et al. Performance Design of Low Temperature Condenser for Waste Heat Recovery System SAE Technical Paper 2013-01-0046 2013 10.4271/2013-01-0046
- KULI base ® Version 9.0-0.01 Build: 1857 Engineering Center Steyr © www.kuli.at
- MATLAB ® R2014a (8.3.0.532) The MathWorks Inc. www.mathworks.com
- Ralph L. Webb , Kim Nae-Hyun Principles of Enhanced Heat transfer 2'nd 1-59169-04-5
- Chang , Yu-J. , Wang , Chi-C. A generalized heat transfer correlation for louver fin geometry International Journal of Heat and Mass Transfer 40 3 533 544 1997
- Chang , Yu-J. , Hsu , Kuei-C. , Lin Yur-T. , Wang , Chi-C. A generalized friction correlation for louvered fin geometry International Journal of Heat and Mass Transfer 43 2237 2243 2000
- Lemmon , E.W. , Huber , M.L. , McLinden , M.O. NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 9.1 National Institute of Standards and Technology Gaithersburg 2013
- Wagner , W. and Pruss , A. The IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance for General and Scientific Use J. Phys. Chem. Ref. Data 31 2 387 535 2002
- Schroeder , J.A. A New Fundamental Equation for Ethanol Master's Thesis University of Idaho 2011