This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Assessment on Internal Nozzle Flow Initialization in Diesel Spray Simulations
Technical Paper
2015-01-0921
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Proper initial conditions are essential to successfully perform a simulation, especially for highly transient problems such as Diesel spray injection. Until now, no much attention has been paid to the internal nozzle flow initialization because spray simulations are usually decoupled from the nozzle. However, new homogeneous models like Eulerian Spray Atomization (ESA) model allow to simulate the internal nozzle flow and the spray seamlessly. Therefore, the behavior of the spray for the first microseconds is highly influenced by the initial conditions inside the nozzle. Furthermore, last experiments confirm the presence of gas inside the nozzle between successive injections. This work deals with the initialization procedure in a way that mass flow rate and spray penetration curves are well predicted by the model.
Recommended Content
Authors
Citation
Payri, R., Gimeno, J., Marti-Aldaravi, P., and Carreres, M., "Assessment on Internal Nozzle Flow Initialization in Diesel Spray Simulations," SAE Technical Paper 2015-01-0921, 2015, https://doi.org/10.4271/2015-01-0921.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 |
Also In
References
- Brusiani , F. , Bianchi , G. , Falfari , S. , Onorati , A. et al. Influence of Cylindrical, k, and ks Diesel Nozzle Shape on the Injector Internal Flow Field and on the Emerging Spray Characteristics SAE Technical Paper 2014-01-1428 2014 10.4271/2014-01-1428
- Battistoni , M. and Grimaldi , C. N. Numerical analysis of injecto flow and spray characteristics from Diesel injectors using fossil and biodiesel fuels Applied Energy 97 656 666 2012
- Payri , R. , Gimeno , J. , Martí-Aldaraví , P. and Bracho , G. Study of the influence of the inlet boundary conditions in a LES simulation of internal flow in a Diesel injector Mathematical and Computer Modelling 57 1709 1715 2013
- Duke , D. , Swantek , A. , Tilocco , Z. , Kastengren , A. et al. X-ray Imaging of Cavitation in Diesel Injectors SAE Int. J. Engines 7 2 1003 1016 2014 10.4271/2014-01-1404
- Duke , D. J. , Kastengren , A. L. , Tilocco , F. Z. , Swantek , A. B. , and Powell , C. F. X-ray radiography measurements of cavitating nozzle flow Atomization and Sprays 23 9 841 860 2013 10.1615/AtomizSpr.2013008340
- Swantek , A. B. , Duke , D. J. , Tilocco , F. Z. , Sovis , N. and Powell , D. F. End of Injection, Mass Expulsion Behaviors in Single Hole Diesel Fuel Injectors 26 th Annual Conference on Liquid Atomization and Spray System Portland United States of America May 2014
- Tuccar , G. , Ozgur , T. , Tosun , E. , Ozgur , C. and Aydin , K. Investigation of Effects of Inlet Boundary Conditions on the Flow Behavior in a Diesel Injector Advanced Materials Research 1016 602 606 2014 10.4028/www.scientific.net/AMR.1016.602
- Winterbourn , M. , Soteriou , C. C. E. , Mitroglou , N. , Gavaises , M. and Daveau , C. Visualising injection events in a fullyoperational Diesel injector with multi-hole transparent tip THIESEL Conference on Thermo-and Flue Dynamic Processes in Direct Injection Engines 10 th 12 th September Valencia, Spain
- Vallet , A. , Burluka , A. A. and Borghi , R. Development of a Eulerian model for the “Atomization” of a liquid jet Atomization and Sprays 11 619 642 2001
- Blokkeel , G. , Barbeau , B. , and Borghi , R. A 3D Eulerian Model to Improve the Primary Breakup of Atomizing Jet SAE Technical Paper 2003-01-0005 2003 10.4271/2003-01-0005
- Demoulin , F.-X. , Beau , P. A. , Blokkel , G. and Borghi , R. Anew model for turbulent flows with large density fluctuations: Application to liquid atomization Atomization and Sprays 17 315 345 2007 10.1615/AtomizSpr.v17.i4.20
- Behesti , N. , Burluka , A. A. and Fairweather , M. Assessment of Σ-Yliq model predictions for air-assisted atomization Theoretical and Computational Fluid Dynamics 21 5 381 397 2007 10.1007/s00162-007-0052-3
- Trask , N. , Schmidth , D. P. , Lightfoot , M. , and Danczyk , S. Compressible modeling of the internal flow in a gas-center swirl-coaxial fuel injector Journal of Propulsion and Power 28 4 685 693 2012 10.2514/1.B34102
- García-Oliver , J. M. et al. Diesel spray CFD simulations basedon Σ-Y Eulerian atomization model Atomization and Sprays 23 1 71 95 2013 10.1615/AtomizSpr.2013007198
- Desantes , J. , Payri , R. , Gimeno , J. , and Marti-Aldaravi , P. Simulation of the First Millimeters of the Diesel Spray by an Eulerian Spray Atomization Model Applied on ECN Spray A Injector SAE Technical Paper 2014-01-1418 2014 10.4271/2014-01-1418
- Salvador , F. J. , Gimeno , J. , Pastor , J. M. and Martí-Aldaraví P. Effect of turbulence and inlet boundary condition on the Diesel spray behavior simulated by an Eulerian Spray Atomization(ESA) model International Journal of MultiphaseFlow 65 108 116 2014 10.1016/j.ijmultiphaseflow.2014.06.003
- Payri , R. , Ruiz , S. , Gimeno , J. and Martí-Aldaraví P. Verification of a new CFD compressible segregated and multi-phase solver with different updates-equations sequences Applied Mathematical Modeling 10.1016/j.apm.2014.07.011
- Bardi , M. et al. Engine Combustion Network: Comparison of spray development, vaporization, and combustion in different combustion vessles Atomization and Sprays 22 12 807 842 2012 10.1615/AtomizSpr.2013005837
- Ferziger , J. H. Compuational Methods for Fluid Dynamics 3 rd Springer Heidelberg, Germany 2002
- Payri , R. , Salvador , F. J. , Gimeno , J. and Bracho , G. The effect of temperatura and pressure on thermodynamic properties of Diesel and Biodiesel fuels Fuel 90 3 1172 1180 2011 10.1016/j.fuel.2010.11.015
- Secretary of Commerce on behalf of the U. S. A. Dodecane National Institute of Standards and Technology 2013 http://www.nist.gov/
- Kastengren , A. L. , Tilocco , F. Z. , Powell , G. F. , Manin , J. , Pickett , L. M. , Payri , R. and Bazyn , T. Engine Combustion Network (ECN): Measurements of nozzle geometry and hydraulic behavior Atomization and Sprays 22 1011 1052 2012 10.1615/AtomizSpr.2013.006309
- Khasanshin , T. S. , Shchmialiou , A. P. and Puddobski , O. G. Thermodynamic Properties of Heavy n-Alkanes in the Liquid State: n-Dodecane International Journal of Thermophysics 24 5 1277 1289 2005
- Kastengren , A. L. and Powell , C. F. Spray density measurements using X-ray radiography Proceeding of the Institution of Mechanical Engineers, Part D: Journal of Atomobile Engineering 221 6 653 662 2007 10.1243/09544070JAUTO392
- Naber , J. and Siebers , D. Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays SAE Technical Paper 960034 1996 10.4271/960034