This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Specific Heat Ratio of High Methane Fraction Natural Gas/Air in Confined Vessel
ISSN: 0148-7191, e-ISSN: 2688-3627
Published April 14, 2015 by SAE International in United States
Annotation ability available
The specific heat ratio used in heat release calculation plays an important role and the mass fraction burned is also a crucial parameter in thermodynamics analysis for engine combustion. A research of high methane fraction natural gas was investigated in a constant volume combustion vessel at different initial conditions. Results show that with the increase of the initial pressure, the specific heat ratio is decreased, and the time of the mixture burned up is postponed, while the peak heat release ratio is increased. With the increase of the methane fraction, the parameters have the opposite behavior. With the increase of the initial temperature, the specific heat ratio is decreased, and the time when the mixture is burned up is accelerated, and the peak heat release ratio has no obviously difference. With the increase of the dilution ratio or the CO2/N2 ratio, the specific heat ratio is decreased, and the peak heat release heat ratio is decreased. Meanwhile, the time of mixture burned up is postponed with the increase of dilute ratio or CO2/ N2 ratio.
CitationTang, C., Si, Z., Zhang, S., Huang, Z. et al., "Specific Heat Ratio of High Methane Fraction Natural Gas/Air in Confined Vessel," SAE Technical Paper 2015-01-0765, 2015, https://doi.org/10.4271/2015-01-0765.
- Bo X. Globle Energy Development Tendency and Realistic Choice of China Energy Structure Adjustment Coal Economic Research 33 2013 5 9
- Ceviz M.A. , Kaymaz İ. Temperature and air-fuel ratio dependent specific heat ratio functions for lean burned and unburned mixture Energy Conversion and Management 46 2005 2387 2404
- Abu-Nada E. , Al-Hinti I. , Al-Sarkhi A. , Akash B. Thermodynamic modeling of spark-ignition engine: Effect of temperature dependent specific heats International Communications in Heat and Mass Transfer 33 2006 1264 1272
- Ebrahimi R. Effect of specific heat ratio on heat release analysis in a spark ignition engine Scientia Iranica 18 2011 1231 1236
- Shehata M.S. Cylinder pressure, performance parameters, heat release, specific heats ratio and duration of combustion for spark ignition engine Energy 35 2010 4710 4725
- Mittal G.Z. M , Schock H Fast mass-fraction-burned calculation using the net pressure method for real-timeapplications Journal of Automobile Engineering 223 2009 389 394
- Klein , M. and Eriksson , L. A Specific Heat Ratio Model for Single-Zone Heat Release Models SAE Technical Paper 2004-01-1464 2004 10.4271/2004-01-1464
- Tang C. , Huang Z. , Jin C. , He J. , Wang J. , Wang X. , Miao H. Explosion characteristics of hydrogen-nitrogen-air mixtures at elevated pressures and temperatures International Journal of Hydrogen Energy 34 2009 554 561
- Tang C. , Zheng J. , Huang Z. , Wang J. Study on nitrogen diluted propane-air premixed flames at elevated pressures and temperatures Energy Conversion and Management 51 2010 288 295
- Li Q. , Hu E. , Cheng Y. , Huang Z. Measurements of laminar flame speeds and flame instability analysis of 2-methyl-1-butanol-air mixtures Fuel 112 2013 263 271
- Gatowski , J. , Balles , E. , Chun , K. , Nelson , F. et al. Heat Release Analysis of Engine Pressure Data SAE Technical Paper 841359 1984 10.4271/841359
- Brunt , M. and Emtage , A. Evaluation of Burn Rate Routines and Analysis Errors SAE Technical Paper 970037 1997 10.4271/970037
- Egnell , R. Combustion Diagnostics by Means of Multizone Heat Release Analysis and NO Calculation SAE Technical Paper 981424 1998 10.4271/981424
- Heywood H.B. Internai Combustion Engine Fundermentals New York McGraw-Hill Book Company 1988 679 680
- Li Q. , Hu E. , Zhang X. , Cheng Y. , Huang Z. Laminar Flame Speeds and Flame Instabilities of Pentanol Isomer-Air Mixtures at Elevated Temperatures and Pressures Energy & Fuels 27 2013 1141 1150