This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Vehicle Component Benchmarking Using a Chassis Dynamometer
ISSN: 1946-3979, e-ISSN: 1946-3987
Published April 14, 2015 by SAE International in United States
Citation: Moskalik, A., Dekraker, P., Kargul, J., and Barba, D., "Vehicle Component Benchmarking Using a Chassis Dynamometer," SAE Int. J. Mater. Manf. 8(3):869-879, 2015, https://doi.org/10.4271/2015-01-0589.
The benchmarking study described in this paper uses data from chassis dynamometer testing to determine the efficiency and operation of vehicle driveline components. A robust test procedure was created that can be followed with no a priori knowledge of component performance, nor additional instrumentation installed in the vehicle.
To develop the procedure, a 2013 Chevrolet Malibu was tested on a chassis dynamometer. Dynamometer data, emissions data, and data from the vehicle controller area network (CAN) bus were used to construct efficiency maps for the engine and transmission. These maps were compared to maps of the same components produced from standalone component benchmarking, resulting in a good match between results from in-vehicle and standalone testing.
The benchmarking methodology was extended to a 2013 Mercedes E350 diesel vehicle. Dynamometer, emissions, and CAN data were used to construct efficiency maps and operation strategies for the engine and transmission. These maps were used in EPA's Advanced Light-duty Powertrain and Hybrid Analysis Tool (ALPHA) vehicle model, which showed a good agreement between the modeled fuel economy and dynamometer test results.
|Journal Article||A Drag Coefficient for Test Cycle Application|
|Technical Paper||Benchmarking and Modeling of a Conventional Mid-Size Car Using ALPHA|