This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Zinc Coated Press-Hardening Steel - Challenges and Solutions
Technical Paper
2015-01-0565
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Press-hardening steels get more and more popular for body in white applications as an approach to meet the demands of passenger safety and CO2 reduction. Unlike the larger part of the structure that is typically zinc coated, the majority of the PHS parts is either uncoated or aluminum silicon coated. This paper shall give an overview of press-hardening steels with zinc coatings with detailed results for corrosion resistance, weldability and mechanical properties for strength levels of 490 to 1800 MPa.
Furthermore as for zinc coated material maintaining a robust press-hardening process is of even higher importance than for uncoated or AlSi coated material. A range of different processes including indirect and direct process are shown in detail. Especially the topic of micro-cracks, mechanisms and avoidance of micro-cracks in the direct process will be discussed. Results from industrial and semi industrial production are shown.
Recommended Content
Authors
Topic
Citation
Kurz, T., Luckeneder, G., Manzenreiter, T., Schwinghammer, H. et al., "Zinc Coated Press-Hardening Steel - Challenges and Solutions," SAE Technical Paper 2015-01-0565, 2015, https://doi.org/10.4271/2015-01-0565.Also In
References
- Steinhoff , K. From Spades to Functionally Graded Automotive Components Compact Training on Hot Stamping Technology, 2nd GM PHS Suppliers Forum Troy, Michigan/USA 2014 7 32
- Larour , P. Hackl , B. Leomann , F. , Benedyk , K. Bending angle calculation in the instrumented three-point bending test proceedings IDDRG 2012: Lightweight: Possibilities & Challenges Nov. 25 29 2012 Mumbai, India 203 215
- Nakano , J. , Malakhov , D. , Purdy , G. A crystallographically consistent optimization of the Zn-Fe system Calphad 29 2005 4 276 288
- Luckeneder , G. , Autengruber , R. , Stellnberger , K.-H. , Faderl , J. and Kurz , T. Einflussfaktoren auf die Korrosionsschutzleistung von pressgehärteten Stahlwerkstoffen Proceedings of 3 Länder Korrosionstag Linz, Austria 2014
- Allely , C. , Dostat , L. , Clauzeau , O. , Ogle , K. and Volovitch , P. Anticorrosion mechanisms of aluminized steel for hot stamping Surf. Coat. Tech. 238 2014 188 196
- Autengruber R. ; Luckeneder G. et al. Corrosion of press-hardened galvanized steel Corr. Sci. 2012
- Manzenreiter , T. Widerstandspunktschweißen als Methode zur Charakterisierung verzinkter presshärtender Stähle für den direkten Prozess proceedings of 22. DVS-Sondertagung Wider-standsschweißen 05 2013
- Ayas , V. Einfluss verschiedener Beschichtungsvarianten und Prozessparameter auf die Widerstandspunktschweißeignung verzinkter presshärtender Stähle Master Thesis Nov. 2012
- Haslinger , H. and Krelig , S. Einfluss von Produktionsparametern auf die Klebeignung von zinkbeschichteten pressgehärteten Stählen Fügen im Karosseriebau (Bad Nauheim) 2013
- Schwinghammer , H. Luckeneder , G. , Manzenreiter , T. , Rosner , M. et al Zinc Coated Press Hardening Steel for the Direct Process proceedings CHS 2 Conference on hot sheet metal forming (Lulea) 2013 525 536
- Hensen , G. , Melfo , W. , Chen , Sh. , Bleeker , R. and Verloop , W. Developing Zinc Coated Boron Steel: Balancing Microcrack Performance and Corrosion Protection proceedings CHS2 Conference on hot sheet metal forming (Lulea) 2013 463 470
- Drillet , P. Study of cracks propagation inside the steel on press hardened steel zinc based coatings proceedings Galvatech (Geneva) 2011
- Kurz , T. Zinc Coated Press-hardening Steels proceedings “Materials in Car Body Design”, Automotive Circle International, Bad Nauheim 2013