This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Fatigue Life Estimation of Front Subframe of a Passenger Car Based on Modal Stress Recovery Method

Journal Article
2015-01-0547
ISSN: 1946-3979, e-ISSN: 1946-3987
Published April 14, 2015 by SAE International in United States
Fatigue Life Estimation of Front Subframe of a Passenger Car Based on Modal Stress Recovery Method
Sector:
Citation: Wang, D. and Jiang, R., "Fatigue Life Estimation of Front Subframe of a Passenger Car Based on Modal Stress Recovery Method," SAE Int. J. Mater. Manf. 8(3):795-802, 2015, https://doi.org/10.4271/2015-01-0547.
Language: English

References

  1. Park, S., Park, D., Yoon, K., and Lee, M., “A Study of Front Subframe System Optimization for Improving Vehicle NVH Performance,” SAE Technical Paper 2009-01-2097, 2009, doi:10.4271/2009-01-2097.
  2. Tsai, M., Hong, H., Geisler, R., and Babiak, G., “Dynamic Vehicle Durability Simulation and Applications using Modal Stress Methodology,” SAE Technical Paper 2011-01-0786, 2011, doi:10.4271/2011-01-0786.
  3. Nam, J. S., Shin, H. W., Choi, G. J., “Durability Prediction for Automobile Aluminum Front Subframe using Nonlinear Models in Virtual Test Simulations,” International Journal of Automotive Technology. 15(4): 593-601, 2014, doi:10.1007/s12239-014-0062-2.
  4. Edara, R., Shih, S., Tamini, N., Palmer, T. et al., “Heavy Vehicle Suspension Frame Durability Analysis Using Virtual Proving Ground,” SAE Technical Paper 2005-01-3609, 2005, doi:10.4271/2005-01-3609.
  5. Jun K. J., Park T. W., Lee S. H., Jung, S. P., et al., “Prediction of Fatigue Life and Estimation of its Reliability on the Parts of an Air Suspension System,” International Journal of Automotive Technology, 9(6): 741-747, 2008, doi:10.1007/s12239-008-0088-4.
  6. Gu Z., Mi C., Wang Y., Jiang, J., “A-Type Frame Fatigue Life Estimation of a Mining Dump Truck Based on Modal Stress Recovery Method,” Engineering Failure Analysis. 26(2012): 89-99, 2012, doi:10.1016/j.engfailanal.2012.07.004.
  7. Schuh, F., Corso, L., and Hoss, L., “Methodology for Fatigue Life Durability Prediction Applied to Commercial Vehicles,” SAE Technical Paper 2014-36-0038, 2014, doi:10.4271/2014-36-0038.
  8. Petracconi C. L., Ferreira S. E., Palma E. S., “Fatigue Life Simulation of a Rear Tow Hook Assembly of a Passenger Car,” Engineering Failure Analysis. 17(2): 455-463, 2010, doi:10.1016/j.engfailanal.2009.09.002.
  9. Sathish Kumar, P., Manikandan, M., and Mahendra, N., “Virtual Durability Analysis of Heavy Commercial Truck Cabin for Proving Ground Inputs,” SAE Technical Paper 2013-01-2788, 2013, doi:10.4271/2013-01-2788.
  10. Gao J., Song J., Zhu T., “Fatigue Life Prediction of Vehicle's Driving Axle House Under Random Loading,” Journal of Mechanical Strength. 30(6):982-987, 2008.
  11. Shao Y., Liu J., Mechefske C., “Drive Axle Housing Failure Analysis of a Mining Dump Truck Based on the Load Spectrum,” Engineering Failure Analysis. 18(2011):1049-1057,2011, doi:10.1016/j.engfailanal.2010.12.023
  12. Tekeli, A., Hazar, S., and Sever, A., “Transient Analysis of Engine Parts under Engine Loads and Random Road Vibration for Fatigue Evaluation,” SAE Int. J. Commer. Veh. 1(1):275-283, 2009, doi:10.4271/2008-01-2623.
  13. Yoon, J. and Kye, K., “Suspension Abuse Test Simulation using Modal Stress Recovery,” SAE Technical Paper 2004-01-0776, 2004, doi:10.4271/2004-01-0776.
  14. Handbook of Mechanical Design Compilation Committee, “Handbook of Mechanical Design: Fatigue Strength design,” Beijing: China Machine Press, 2007.
  15. Stephens, R. I., Fatemi, A., Stephens, R. R., Fuchs, H. O., “Metal Fatigue in Engineering: Second Edition,” New York: John Wiley & Sons, 2000.
  16. Kauzlarich, J. J., “The Palmgren-Miner Rule Derived,” Tribology Series. 14(1989): 175-179, 1989, doi:10.1016/S0167-8922(08)70192-5.
  17. Susmel, L., Tovo, R., “Estimating Fatigue Damage Under Variable Amplitude Multiaxial Fatigue Loading,” Fatigue & Fracture of Engineering Materials & Structures. 34(12): 1053-1077, 2011, doi:10.1111/j.1460-2695.2011.01594.x.
  18. Standardization Administration of the People' Republic of China, “Method of Running Test-Automotive Ride Comfort,” China National Standard GB/T 4970-2009, Sep. 2009.
  19. Choi, G., Min, H., and Paik, S., “Dynamic Stress Analysis of Vehicle Using Virtual Proving Ground Approach,” SAE Technical Paper 2000-01-0121, 2000, doi:10.4271/2000-01-0121.
  20. Guo, H., Chen, W., Fan, X., Deng, Y., et al., “Research of Enhancement Coefficient of Automobile Reliability Enhancement Test on Proving Ground,” Chinese Journal of Mechanical Engineering, 40(10): 73-76, 2004.

Cited By